Radeon HD 6870

Daniel van Vugt daniel.van.vugt at canonical.com
Tue Sep 10 06:21:42 UTC 2013


Also, you appear to have the AMD/ATI driver "fglrx" loaded. This could 
likely prevent Mir from working properly (as it uses the "radeon" 
module). If you want to test Mir, please remove all "fglrx*" packages.

- Daniel


On 10/09/13 09:29, Daniel van Vugt wrote:
> Thanks. We know about that issue. It is being discussed here:
> https://bugs.launchpad.net/mir/+bug/1218815
>
> If you have any different issues in future, please report them using
> this link:
> https://bugs.launchpad.net/mir/+filebug
>
> - Daniel
>
>
> On 09/09/13 17:38, set at nmset.info wrote:
>> Hello
>>
>> Don't know if it's the right place to report this.
>>
>> Mir testing failed with Radeon HD 6870. 13.10 beta freshly installed. Mir
>> installed following web available info.
>>
>> Screen with multiple vertical black unstable stripes.
>>
>> TECH INFO:
>>
>> (The info below is drawn from an ARCH session).
>>
>> lspci -v
>> 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI]
>> Barts XT [Radeon HD 6870] (prog-if 00 [VGA controller])
>>          Subsystem: XFX Pine Group Inc. Device 3108
>>          Flags: bus master, fast devsel, latency 0, IRQ 55
>>          Memory at d0000000 (64-bit, prefetchable) [size=256M]
>>          Memory at fbac0000 (64-bit, non-prefetchable) [size=128K]
>>          I/O ports at b000 [size=256]
>>          Expansion ROM at fbaa0000 [disabled] [size=128K]
>>          Capabilities: [50] Power Management version 3
>>          Capabilities: [58] Express Legacy Endpoint, MSI 00
>>          Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>>          Capabilities: [100] Vendor Specific Information: ID=0001
>> Rev=1 Len=010
>> <?>
>>          Capabilities: [150] Advanced Error Reporting
>>          Kernel driver in use: fglrx_pci
>>          Kernel modules: fglrx
>>
>> lspci -vv
>> 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI]
>> Barts XT [Radeon HD 6870] (prog-if 00 [VGA controller])
>>          Subsystem: XFX Pine Group Inc. Device 3108
>>          Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr-
>> Stepping- SERR+ FastB2B- DisINTx+
>>          Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>          Latency: 0, Cache Line Size: 64 bytes
>>          Interrupt: pin A routed to IRQ 55
>>          Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
>>          Region 2: Memory at fbac0000 (64-bit, non-prefetchable)
>> [size=128K]
>>          Region 4: I/O ports at b000 [size=256]
>>          Expansion ROM at fbaa0000 [disabled] [size=128K]
>>          Capabilities: [50] Power Management version 3
>>                  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>                  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>          Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
>>                  DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency
>> L0s <4us,
>> L1 unlimited
>>                          ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>>                  DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
>> Unsupported-
>>                          RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
>>                          MaxPayload 128 bytes, MaxReadReq 512 bytes
>>                  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
>> TransPend-
>>                  LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1,
>> Latency
>> L0 <64ns, L1 <1us
>>                          ClockPM- Surprise- LLActRep- BwNot-
>>                  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
>> CommClk+
>>                          ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>                  LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+
>> DLActive- BWMgmt- ABWMgmt-
>>                  DevCap2: Completion Timeout: Not Supported,
>> TimeoutDis-, LTR-,
>> OBFF Not Supported
>>                  DevCtl2: Completion Timeout: 50us to 50ms,
>> TimeoutDis-, LTR-,
>> OBFF Disabled
>>                  LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
>> SpeedDis-
>>                           Transmit Margin: Normal Operating Range,
>> EnterModifiedCompliance- ComplianceSOS-
>>                           Compliance De-emphasis: -6dB
>>                  LnkSta2: Current De-emphasis Level: -3.5dB,
>> EqualizationComplete-, EqualizationPhase1-
>>                           EqualizationPhase2-, EqualizationPhase3-,
>> LinkEqualizationRequest-
>>          Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>>                  Address: 00000000fee3f00c  Data: 41d2
>>          Capabilities: [100 v1] Vendor Specific Information: ID=0001
>> Rev=1
>> Len=010 <?>
>>          Capabilities: [150 v1] Advanced Error Reporting
>>                  UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
>> UnxCmplt-
>> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>                  UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
>> UnxCmplt-
>> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>>                  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
>> UnxCmplt-
>> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>>                  CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
>> NonFatalErr+
>>                  CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
>> NonFatalErr+
>>                  AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
>> ChkEn-
>>          Kernel driver in use: fglrx_pci
>>          Kernel modules: fglrx
>>
>>
>> Regards.
>>
>>
>



More information about the Mir-devel mailing list