[ubuntu/maverick] initramfs-tools 0.98.1ubuntu1 (Accepted)
Colin Watson
cjwatson at ubuntu.com
Tue Sep 7 12:50:26 BST 2010
initramfs-tools (0.98.1ubuntu1) maverick; urgency=low
* Resynchronise with Debian. Remaining changes:
- Use busybox-initramfs for Depends.
- Mount /dev with the default tmpfs size rather than sourcing udev.conf.
- Set takeover=1 in update-initramfs.
- Allow the mounting of a root filesystem as a loop device on top of a
host filesystem, used for Wubi installs.
- Add vfat support to the initramfs.
- Add 2>&1 to the run-init line.
- Add mountroot failure support, to allow meaningful messages when no
root device can be found.
- Panic if either the root device doesn't exist, or blkid cannot
identify it. Allows for mountroot failure hooks for md devices to be
displayed.
- Ignore blacklist for forced vga= usage.
- Loop for 5 seconds waiting for $suspend to show up, adjustable with
the resumedelay= command-line arg.
- Allow for alternative PREREQS to be specified using | as the
separator.
- Support loading compcache from the initramfs.
- Remove klibc utilities if busybox is in use.
- Revert "framebuffer: Let udev create fb devices." udev isn't started
at this point and therefore can't create framebuffer devices.
- Create /dev/mem and /dev/zero if video=uvesafb.
- Add hid_* modules, since some keyboards will not be usable at the
initramfs/busybox prompt without them.
- Replace all instances of vol_id with blkid, and depend on util-linux.
- Use gzip from busybox instead of klibc. Depend on busybox-initramfs
(>= 1:1.13.3-1ubuntu5) to ensure that we have it.
- Remove bnx2 from the initramfs; it needs firmware, and at this stage
we only support network modules that don't need firmware loading.
- Don't display "Loading, please wait..." message when 'quiet' is in
/proc/cmdline.
- Allow scripts and hooks to specify OPTION=VAR, and unless VAR is set
to something other than "n", the script will not be included.
- Restore the framebuffer hook and script, copying KMS and other
framebuffer drivers into the initramfs, but make them optional; you
need to set FRAMEBUFFER=y for these to be included.
- Depend on a sufficient version of udev to load fbcon.
- Conflict with older versions of usplash.
- Don't load keymaps unless we're loading a framebuffer; but set the
keymap before giving a root shell.
- Add new initramfs-tools-bin package containing a binary that uses
libudev to wait for udev to create the udev device, or wait for udev
to finish processing if we catch it in the act, and returns the
filesystem type as already probed by udev. Use it while mounting
local root filesystems and while resuming.
- Add hwaddr= alias for BOOTIF= for compatibility.
- Allow specifying multiple break points using a comma delimiter.
- Automatically blacklist vga16fb when vga= or video= specified on
kernel command-line.
- Call 'plymouth message' before resuming, to notify the user of the
reason for the delay if the plymouth theme supports it.
- Add a new 'fixrtc' script that tries to set the system clock forward
based on the last mount time of the root disk; without this kludge,
systems without a working RTC will end up in a perpetual reboot loop.
- Drop hooks/keymap and associated code; console-setup takes care of
this in Ubuntu.
- Incorporate rzscontrol from compcache so that we can control current
ramzswap devices.
* Stop silencing /bin/resume output when trying to resume; the offending
message in klibc is now debug-only.
initramfs-tools (0.98.1) unstable; urgency=high
[ Vagrant Cascadian ]
* [85fbb23] configure_networking(): Look for presence of
/tmp/net-*.conf files to not recall ipconfig. (Closes: #584583)
Date: Tue, 07 Sep 2010 12:45:05 +0100
Changed-By: Colin Watson <cjwatson at ubuntu.com>
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
Signed-By: Colin Watson <cjwatson at canonical.com>
https://launchpad.net/ubuntu/maverick/+source/initramfs-tools/0.98.1ubuntu1
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Tue, 07 Sep 2010 12:45:05 +0100
Source: initramfs-tools
Binary: initramfs-tools initramfs-tools-bin
Architecture: source
Version: 0.98.1ubuntu1
Distribution: maverick
Urgency: high
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
Changed-By: Colin Watson <cjwatson at ubuntu.com>
Description:
initramfs-tools - tools for generating an initramfs
initramfs-tools-bin - binaries used by initramfs-tools
Closes: 584583
Changes:
initramfs-tools (0.98.1ubuntu1) maverick; urgency=low
.
* Resynchronise with Debian. Remaining changes:
- Use busybox-initramfs for Depends.
- Mount /dev with the default tmpfs size rather than sourcing udev.conf.
- Set takeover=1 in update-initramfs.
- Allow the mounting of a root filesystem as a loop device on top of a
host filesystem, used for Wubi installs.
- Add vfat support to the initramfs.
- Add 2>&1 to the run-init line.
- Add mountroot failure support, to allow meaningful messages when no
root device can be found.
- Panic if either the root device doesn't exist, or blkid cannot
identify it. Allows for mountroot failure hooks for md devices to be
displayed.
- Ignore blacklist for forced vga= usage.
- Loop for 5 seconds waiting for $suspend to show up, adjustable with
the resumedelay= command-line arg.
- Allow for alternative PREREQS to be specified using | as the
separator.
- Support loading compcache from the initramfs.
- Remove klibc utilities if busybox is in use.
- Revert "framebuffer: Let udev create fb devices." udev isn't started
at this point and therefore can't create framebuffer devices.
- Create /dev/mem and /dev/zero if video=uvesafb.
- Add hid_* modules, since some keyboards will not be usable at the
initramfs/busybox prompt without them.
- Replace all instances of vol_id with blkid, and depend on util-linux.
- Use gzip from busybox instead of klibc. Depend on busybox-initramfs
(>= 1:1.13.3-1ubuntu5) to ensure that we have it.
- Remove bnx2 from the initramfs; it needs firmware, and at this stage
we only support network modules that don't need firmware loading.
- Don't display "Loading, please wait..." message when 'quiet' is in
/proc/cmdline.
- Allow scripts and hooks to specify OPTION=VAR, and unless VAR is set
to something other than "n", the script will not be included.
- Restore the framebuffer hook and script, copying KMS and other
framebuffer drivers into the initramfs, but make them optional; you
need to set FRAMEBUFFER=y for these to be included.
- Depend on a sufficient version of udev to load fbcon.
- Conflict with older versions of usplash.
- Don't load keymaps unless we're loading a framebuffer; but set the
keymap before giving a root shell.
- Add new initramfs-tools-bin package containing a binary that uses
libudev to wait for udev to create the udev device, or wait for udev
to finish processing if we catch it in the act, and returns the
filesystem type as already probed by udev. Use it while mounting
local root filesystems and while resuming.
- Add hwaddr= alias for BOOTIF= for compatibility.
- Allow specifying multiple break points using a comma delimiter.
- Automatically blacklist vga16fb when vga= or video= specified on
kernel command-line.
- Call 'plymouth message' before resuming, to notify the user of the
reason for the delay if the plymouth theme supports it.
- Add a new 'fixrtc' script that tries to set the system clock forward
based on the last mount time of the root disk; without this kludge,
systems without a working RTC will end up in a perpetual reboot loop.
- Drop hooks/keymap and associated code; console-setup takes care of
this in Ubuntu.
- Incorporate rzscontrol from compcache so that we can control current
ramzswap devices.
* Stop silencing /bin/resume output when trying to resume; the offending
message in klibc is now debug-only.
.
initramfs-tools (0.98.1) unstable; urgency=high
.
[ Vagrant Cascadian ]
* [85fbb23] configure_networking(): Look for presence of
/tmp/net-*.conf files to not recall ipconfig. (Closes: #584583)
Checksums-Sha1:
39812535c41ceaa921bcd5dc18b07b48bc3805b4 1821 initramfs-tools_0.98.1ubuntu1.dsc
3b30a5c3b686b5f36a177ed4463cf27b11d78e4b 106315 initramfs-tools_0.98.1ubuntu1.tar.gz
Checksums-Sha256:
73a7c445196570fdbe8b194d24c896ae6a7779d25a5af616abbcba12d76bfadc 1821 initramfs-tools_0.98.1ubuntu1.dsc
dfbe7e3c7843d8e89ddf76ef708ef18b4458f43eedd7fe62a1813709f1fb3bd7 106315 initramfs-tools_0.98.1ubuntu1.tar.gz
Files:
3b44ae8ca391e0f924c56949a93e8b60 1821 utils optional initramfs-tools_0.98.1ubuntu1.dsc
7639f5ed4f7d454876ce6f8f38185ef6 106315 utils optional initramfs-tools_0.98.1ubuntu1.tar.gz
Original-Maintainer: Debian kernel team <debian-kernel at lists.debian.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Colin Watson <cjwatson at debian.org> -- Debian developer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=3M+p
-----END PGP SIGNATURE-----
More information about the Maverick-changes
mailing list