[ubuntu/maverick] cron 3.0pl1-113ubuntu1 (Accepted)
Jamie Strandboge
jamie at ubuntu.com
Fri Jun 25 22:45:24 BST 2010
cron (3.0pl1-113ubuntu1) maverick; urgency=low
* Merge from debian unstable. Fixes:
- LP: #46493 (this should have been fixed way back in 3.0pl1-87, and I
confirmed it is no longer a problem)
- LP: #118168 (Debian #79037)
- LP: #151231 (Debian #155109, #443615)
- LP: #308341 (Debian #437180)
* Remaining changes:
- debian/control:
+ Build-Depends on debhelper >= 7.3.15ubuntu2, for Upstart
+ Drop MTA and lockfile-args to Suggests
- add debian/cron.upstart
- debian/postinst: remove calls to update-rc.d, invoke-rc.d and
/etc/init.d/cron
- debian/postrm: remove call to update-rc.d
- debian/prerm: remove calls to invoke-rc.d and /etc/init.d/cron
- debian/rules: install Upstart job
* Drop the following changes, now in debian:
- popen.c: check return code of initgroups() in cron_popen()
- debian/control: add missing ${misc:Depends}
- debian/control: Depends bump on lsb to >= 3.2.12ubuntu2. No longer
required now that we use Upstart
- debian/cron.pam: switch from including common-session to including
the new common-session-noninteractive
- pathnames.h: use sensible-editor
cron (3.0pl1-113) unstable; urgency=medium
[ Christian Kastner / Javier Fernandez-Sanguino ]
* debian/postinst:
- Now that permissions and ownership of crontabs are changed unconditionally,
do not attempt to chown user crontabs if none are present. Closes: #585636
- Only change permissions if the crontabs directory exist
cron (3.0pl1-112) unstable; urgency=low
[ Christian Kastner ]
* do_command.c:
- Don't send mail when a job exits non-zero, only send mail if the job sent
output to stderr. This behaviour was introduced erroneously; while it
does have merit, it is completly against standard cron behaviour.
Closes: #581612
* debian/compat:
- Bumped debhelper compatibility to 7
* debian/control:
- Bumped Standards-Version to 3.8.4 (no change needed)
- Build-Depend on debhelper (>= 7.0.50~)
- Added dependency on ${misc:Depends} to package cron
* debian/cron.init:
- Changed Default-Stop from (1) to (empty). rc0 and rc6 were removed in
3.0pl1-101 because the stop action -- sending SIGTERM/SIGKILL to cron
on shutdown/reboot -- was redundant. This, however, also applies to
rc1, because killprocs will do that for us.
* debian/postinst:
- Removed obsolete dpkg file backup code, this has been handed over to dpkg
in 3.0pl1-109
- Removed last remaining stop action (for rc1) from upate-rc.d (see above)
- Add dpkg-statoverride for /usr/bin/crontab, and unconditionally change
permissions of /var/spool/cron/crontabs. Closes: #304036, #460095
* debian/standard.monthly:
- Removed because it had been empty for years and therefore served no
purpose
* debian/cron.bug-{control,script}
- Added to extend information submitted by reportbug
* debian/rules:
- Applied changes for standard.monthly and cron.bug-{control,script} above
* debian/copyright:
- Updated to reflect recent contributions
* debian/README:
- Updated ancient information with the current status (PAM support, SELinux
support, etc.)
* debian/TODO:
- Added new entry regarding clarification of the purpose behind /etc/cron.d
* debian/REFS:
- Summary of links to relevant development threads; re-added for
informational purposes.
[ Javier Fernandez-Sanguino ]
* debian/cron.init:
- Fix typo (Closes: #585399)
cron (3.0pl1-111) unstable; urgency=low
[ Christian Kastner ]
* debian/cron.init:
- When both /etc/environment and /etc/default/locale contain locale
information, warn that variables from /etc/environment will be ignored.
Closes: #543895, #580942
- Add autofs and NIS+ to Should-Starts, because especially NIS+ must be run
before cron, if present. Closes: #511757
- init script should be stopped in runlevel 0 and 6, too
[ Javier Fernandez-Sanguino ]
* do_command.c: Revert change so that mails are not sent if MAILTO
is null. Closes: #580938
cron (3.0pl1-110) unstable; urgency=medium
[ Christian Kastner ]
* user.c
- Fix broken parsing and handling of crontabs with no-newline-before-EOF
- Refuse to install such crontabs via crontab(1). Closes: #79037
- Log crontabs missing newline before EOF to syslog. This is only relevant
for crontabs not installed via crontab(1), ie. /etc/cron.d/* and
/etc/crontab. Closes: #76625
- Add a log message explicitly stating that all jobs of crontabs with
syntax errors will not be run (ie, all-or-nothing). See #555954
* crontab.c
- Tell the user which chars are expected on retry, too
* cron.c
- Don't let the daemon die when directories disappear, eg. when moving
directories around. Patch provided by Justin Pryzby (thanks!).
Closes: #470564
* database.c
- Recover from broken symlinks in /etc/cron.d/ (Closes: #433609)
- Don't report wrong file owner in /etc/cron.d/ as wrong symlink owner
- Check the permissions of symlink targets (writeable only by root)
* do_command.c
- Don't let long-running commands time out certain MTAs. Patch provided by
Justin Pryzby, based on an analysis by Alexis Huxley (thanks!). Debian's
default MTA, exim, does not time out, so it shouldn't have been
affected. Closes: #155109, #443615
- Bypass mail generation/sending code when no MTA is installed.
Previously, jobs with a lot of output would die once the pipe's buffer
was filled. Closes: #577133
* popen.c
- Check return value of setgid() call, also associated with the
CVE-2006-2607 fix
- Move signal handling away from ancient API. Patch provided by Justin
Pryzby (thanks!).
* misc.c
- On startup, when recreating missing directories, do so with permissions
reflecting Debian's SGID crontab vs upstream's SUID
* entry.c
- Explicitly check for valid ranges in range values instead of upstream's
broken approach which misses certain combinations of ranges and steps.
Closes: #533726
* env.c
- Backport environment variable parser from 4.1. The 3.0 parser has a
number of issues, especially with otherwise trivial matters such as
whitespace. Closes: #437180
* cron.8
- Document symlink behaviour.
* crontab.1
- Document the new EOF handling described above.
* crontab.5
- Clarify parsing of empty variables (Closes: #497742)
* debian/TODO
- Remove obsolete entries; add a table of planned milestones
* debian/NEWS
- Briefly describe the most important changes since lenny's release
* debian/control
- Add Christian Kastner to the Maintainers list (Closes: #565143)
[ Javier Fernandez-Sanguino Pen~a ]
* debian/rules: Install the cron.default file properly
* debian/standard.daily:
- Do not indicate that lost+found does not exist if the filesystem is XFS
(Closes: #577508 577536)
cron (3.0pl1-109) unstable; urgency=medium
* cron.c:
- Apply patch derived from OpenBSD's cron by Petya Kohts to
handle properly DST and avoid running cron jobs twice, or
skip cron jobs when there is a savings time change.
Closes: #217836, #458123, #474157, LP: #36690
* crontab.c:
- Revert the behaviour that prevented 'alias crontab="crontab -i"' from
working. Now the -i flag is allowed regardless of other command line
switches. (Closes: #513379)
- Be more verbose in the example provided for first-time users than run
'crontab -e'
- Check if the crontab exists before attempting its removal and before
prompting the user (whe using -i)
- When prompting, tell the user which chars are expected
* crontab.1:
- Change usage to match crontab's output
- Clarify use of the cron.allow and cron.deny files (Closes: #511782)
* crontab.5:
- Describe a known limitation related to the lack of the cron daemon's
per-user timezone support (Closes: #497741, 353246, 166533)
- Describe the use of tilde (~) as a substitute for $HOME (Closes: 477198)
- Describe the lack of replacements of variables (Closes: #493636)
* popen.c: Check return call of initgroups(), associated with
CVE-2006-2607 fix. Thanks to Christian Kastner for the heads up.
* cron.8:
- Describe how the environment is managed in Debian
* debian/cron.init: Also use /etc/timezone to setup the timezone environment
(TZ) if not set.
* debian/standard.daily:
- Do not make a backup copy of dpkg files anymore since dpkg (1.15.4) does
this already (when #541412 was fixed) (Closes: #541415)
- Fix a bug in lost+found reporting. Files in lost+found were never +
actually reported. [ Patch from Teemu Kiviniemi ]
- Added ext4 for lost+found searches. [ Patch from Teemu Kiviniemi ]
Closes LP: #367383
* debian/control:
- Add a Breaks dpkg (<< 1.15.4) to ensure that one always has the backup
functionality either via cron or via dpkg.
- Provides: cron-daemon, which was reinstated in the virtual package
list in November 2009 (Closes: #349170)
cron (3.0pl1-108) unstable; urgency=high
* Add a Depends: on libpam-runtime (>= 1.0.1-11) since this
is required for the use of common-session-noninteractive
(Closes: 575342)
cron (3.0pl1-107) unstable; urgency=low
* debian/cron.pam: Use common-session-noninteractive in pam.d configuration
instead of common-session so that libpam-ssh is not run. If libpam-ssh was
installed the previous configuration resulted in cron spawning
many ssh-agent processes (Closes: #572292)
* debian/cron.init: Add Should-Start/Stop dependency to slapd so that cron
* can start up tasks for users define in an LDAP (Closes: #557659, #546367)
* Fix the use of perror so that the error message is correct when
printing the reason why an operation failed. Thanks to
Justin Pryzby for the patch. (Closes: 470587)
* pathnames.h: Use /usr/bin/sensible-editor instead of /usr/bin/editor when
calling crontab -e (Closes: #482284)
* Fix debian/control description, thanks to Justin B Rye for the patch
(Closes: #535227)
* crontab.c: Produce a different warning message when root tries to setup a
crontab for a user that is not allowed to do so, and do not log the
action (Closes: #505288)
* Only allow -i if -r has been specified previously (Closes: #513379)
* Update debian/README.Debian to indicate that the package is
being maintained at Alioth, thanks Tomas Pospisek for the patch
(Closes: #511740)
* crontab.c: Update the usage() call so that it refers to the use
of -i when removing (-r)
* crontab.1: Update the manpage:
- Use the same option listing as in the crontab usage() call
- Remove 'tweaked', explain what -u does in each context.
- Remove V3, use 'Vixie Cron' instead
(Closes: #572249)
- Update the manpage years (Closes: #563296)
- Describe the usage of the crontab group wrt /var/spool/cron/crontabs
(Closes: #539182)
* Use debhelper compatibility version 5
* Include cross build support with patch to debian/rules provided by Neil
Williams (Closes: #465077)
* Change maintainer's email address
Date: Fri, 25 Jun 2010 16:08:12 -0500
Changed-By: Jamie Strandboge <jamie at ubuntu.com>
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss at lists.ubuntu.com>
https://launchpad.net/ubuntu/maverick/+source/cron/3.0pl1-113ubuntu1
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Fri, 25 Jun 2010 16:08:12 -0500
Source: cron
Binary: cron
Architecture: source
Version: 3.0pl1-113ubuntu1
Distribution: maverick
Urgency: high
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Jamie Strandboge <jamie at ubuntu.com>
Description:
cron - process scheduling daemon
Closes: 76625 79037 155109 166533 217836 304036 349170 353246 433609 437180 443615 458123 460095 465077 470564 470587 474157 477198 482284 493636 497741 497742 505288 511740 511757 511782 513379 533726 535227 539182 541415 543895 546367 557659 563296 565143 572249 572292 575342 577133 577508 580938 580942 581612 585399 585636
Launchpad-Bugs-Fixed: 36690 46493 118168 151231 308341 367383
Changes:
cron (3.0pl1-113ubuntu1) maverick; urgency=low
.
* Merge from debian unstable. Fixes:
- LP: #46493 (this should have been fixed way back in 3.0pl1-87, and I
confirmed it is no longer a problem)
- LP: #118168 (Debian #79037)
- LP: #151231 (Debian #155109, #443615)
- LP: #308341 (Debian #437180)
* Remaining changes:
- debian/control:
+ Build-Depends on debhelper >= 7.3.15ubuntu2, for Upstart
+ Drop MTA and lockfile-args to Suggests
- add debian/cron.upstart
- debian/postinst: remove calls to update-rc.d, invoke-rc.d and
/etc/init.d/cron
- debian/postrm: remove call to update-rc.d
- debian/prerm: remove calls to invoke-rc.d and /etc/init.d/cron
- debian/rules: install Upstart job
* Drop the following changes, now in debian:
- popen.c: check return code of initgroups() in cron_popen()
- debian/control: add missing ${misc:Depends}
- debian/control: Depends bump on lsb to >= 3.2.12ubuntu2. No longer
required now that we use Upstart
- debian/cron.pam: switch from including common-session to including
the new common-session-noninteractive
- pathnames.h: use sensible-editor
.
cron (3.0pl1-113) unstable; urgency=medium
.
[ Christian Kastner / Javier Fernandez-Sanguino ]
* debian/postinst:
- Now that permissions and ownership of crontabs are changed unconditionally,
do not attempt to chown user crontabs if none are present. Closes: #585636
- Only change permissions if the crontabs directory exist
.
cron (3.0pl1-112) unstable; urgency=low
.
[ Christian Kastner ]
* do_command.c:
- Don't send mail when a job exits non-zero, only send mail if the job sent
output to stderr. This behaviour was introduced erroneously; while it
does have merit, it is completly against standard cron behaviour.
Closes: #581612
* debian/compat:
- Bumped debhelper compatibility to 7
* debian/control:
- Bumped Standards-Version to 3.8.4 (no change needed)
- Build-Depend on debhelper (>= 7.0.50~)
- Added dependency on ${misc:Depends} to package cron
* debian/cron.init:
- Changed Default-Stop from (1) to (empty). rc0 and rc6 were removed in
3.0pl1-101 because the stop action -- sending SIGTERM/SIGKILL to cron
on shutdown/reboot -- was redundant. This, however, also applies to
rc1, because killprocs will do that for us.
* debian/postinst:
- Removed obsolete dpkg file backup code, this has been handed over to dpkg
in 3.0pl1-109
- Removed last remaining stop action (for rc1) from upate-rc.d (see above)
- Add dpkg-statoverride for /usr/bin/crontab, and unconditionally change
permissions of /var/spool/cron/crontabs. Closes: #304036, #460095
* debian/standard.monthly:
- Removed because it had been empty for years and therefore served no
purpose
* debian/cron.bug-{control,script}
- Added to extend information submitted by reportbug
* debian/rules:
- Applied changes for standard.monthly and cron.bug-{control,script} above
* debian/copyright:
- Updated to reflect recent contributions
* debian/README:
- Updated ancient information with the current status (PAM support, SELinux
support, etc.)
* debian/TODO:
- Added new entry regarding clarification of the purpose behind /etc/cron.d
* debian/REFS:
- Summary of links to relevant development threads; re-added for
informational purposes.
[ Javier Fernandez-Sanguino ]
* debian/cron.init:
- Fix typo (Closes: #585399)
.
cron (3.0pl1-111) unstable; urgency=low
.
[ Christian Kastner ]
* debian/cron.init:
- When both /etc/environment and /etc/default/locale contain locale
information, warn that variables from /etc/environment will be ignored.
Closes: #543895, #580942
- Add autofs and NIS+ to Should-Starts, because especially NIS+ must be run
before cron, if present. Closes: #511757
- init script should be stopped in runlevel 0 and 6, too
[ Javier Fernandez-Sanguino ]
* do_command.c: Revert change so that mails are not sent if MAILTO
is null. Closes: #580938
.
cron (3.0pl1-110) unstable; urgency=medium
.
[ Christian Kastner ]
* user.c
- Fix broken parsing and handling of crontabs with no-newline-before-EOF
- Refuse to install such crontabs via crontab(1). Closes: #79037
- Log crontabs missing newline before EOF to syslog. This is only relevant
for crontabs not installed via crontab(1), ie. /etc/cron.d/* and
/etc/crontab. Closes: #76625
- Add a log message explicitly stating that all jobs of crontabs with
syntax errors will not be run (ie, all-or-nothing). See #555954
* crontab.c
- Tell the user which chars are expected on retry, too
* cron.c
- Don't let the daemon die when directories disappear, eg. when moving
directories around. Patch provided by Justin Pryzby (thanks!).
Closes: #470564
* database.c
- Recover from broken symlinks in /etc/cron.d/ (Closes: #433609)
- Don't report wrong file owner in /etc/cron.d/ as wrong symlink owner
- Check the permissions of symlink targets (writeable only by root)
* do_command.c
- Don't let long-running commands time out certain MTAs. Patch provided by
Justin Pryzby, based on an analysis by Alexis Huxley (thanks!). Debian's
default MTA, exim, does not time out, so it shouldn't have been
affected. Closes: #155109, #443615
- Bypass mail generation/sending code when no MTA is installed.
Previously, jobs with a lot of output would die once the pipe's buffer
was filled. Closes: #577133
* popen.c
- Check return value of setgid() call, also associated with the
CVE-2006-2607 fix
- Move signal handling away from ancient API. Patch provided by Justin
Pryzby (thanks!).
* misc.c
- On startup, when recreating missing directories, do so with permissions
reflecting Debian's SGID crontab vs upstream's SUID
* entry.c
- Explicitly check for valid ranges in range values instead of upstream's
broken approach which misses certain combinations of ranges and steps.
Closes: #533726
* env.c
- Backport environment variable parser from 4.1. The 3.0 parser has a
number of issues, especially with otherwise trivial matters such as
whitespace. Closes: #437180
* cron.8
- Document symlink behaviour.
* crontab.1
- Document the new EOF handling described above.
* crontab.5
- Clarify parsing of empty variables (Closes: #497742)
* debian/TODO
- Remove obsolete entries; add a table of planned milestones
* debian/NEWS
- Briefly describe the most important changes since lenny's release
* debian/control
- Add Christian Kastner to the Maintainers list (Closes: #565143)
.
[ Javier Fernandez-Sanguino Pen~a ]
* debian/rules: Install the cron.default file properly
* debian/standard.daily:
- Do not indicate that lost+found does not exist if the filesystem is XFS
(Closes: #577508 577536)
.
cron (3.0pl1-109) unstable; urgency=medium
.
* cron.c:
- Apply patch derived from OpenBSD's cron by Petya Kohts to
handle properly DST and avoid running cron jobs twice, or
skip cron jobs when there is a savings time change.
Closes: #217836, #458123, #474157, LP: #36690
* crontab.c:
- Revert the behaviour that prevented 'alias crontab="crontab -i"' from
working. Now the -i flag is allowed regardless of other command line
switches. (Closes: #513379)
- Be more verbose in the example provided for first-time users than run
'crontab -e'
- Check if the crontab exists before attempting its removal and before
prompting the user (whe using -i)
- When prompting, tell the user which chars are expected
* crontab.1:
- Change usage to match crontab's output
- Clarify use of the cron.allow and cron.deny files (Closes: #511782)
* crontab.5:
- Describe a known limitation related to the lack of the cron daemon's
per-user timezone support (Closes: #497741, 353246, 166533)
- Describe the use of tilde (~) as a substitute for $HOME (Closes: 477198)
- Describe the lack of replacements of variables (Closes: #493636)
* popen.c: Check return call of initgroups(), associated with
CVE-2006-2607 fix. Thanks to Christian Kastner for the heads up.
* cron.8:
- Describe how the environment is managed in Debian
* debian/cron.init: Also use /etc/timezone to setup the timezone environment
(TZ) if not set.
* debian/standard.daily:
- Do not make a backup copy of dpkg files anymore since dpkg (1.15.4) does
this already (when #541412 was fixed) (Closes: #541415)
- Fix a bug in lost+found reporting. Files in lost+found were never +
actually reported. [ Patch from Teemu Kiviniemi ]
- Added ext4 for lost+found searches. [ Patch from Teemu Kiviniemi ]
Closes LP: #367383
* debian/control:
- Add a Breaks dpkg (<< 1.15.4) to ensure that one always has the backup
functionality either via cron or via dpkg.
- Provides: cron-daemon, which was reinstated in the virtual package
list in November 2009 (Closes: #349170)
.
cron (3.0pl1-108) unstable; urgency=high
.
* Add a Depends: on libpam-runtime (>= 1.0.1-11) since this
is required for the use of common-session-noninteractive
(Closes: 575342)
.
cron (3.0pl1-107) unstable; urgency=low
.
* debian/cron.pam: Use common-session-noninteractive in pam.d configuration
instead of common-session so that libpam-ssh is not run. If libpam-ssh was
installed the previous configuration resulted in cron spawning
many ssh-agent processes (Closes: #572292)
* debian/cron.init: Add Should-Start/Stop dependency to slapd so that cron
* can start up tasks for users define in an LDAP (Closes: #557659, #546367)
* Fix the use of perror so that the error message is correct when
printing the reason why an operation failed. Thanks to
Justin Pryzby for the patch. (Closes: 470587)
* pathnames.h: Use /usr/bin/sensible-editor instead of /usr/bin/editor when
calling crontab -e (Closes: #482284)
* Fix debian/control description, thanks to Justin B Rye for the patch
(Closes: #535227)
* crontab.c: Produce a different warning message when root tries to setup a
crontab for a user that is not allowed to do so, and do not log the
action (Closes: #505288)
* Only allow -i if -r has been specified previously (Closes: #513379)
* Update debian/README.Debian to indicate that the package is
being maintained at Alioth, thanks Tomas Pospisek for the patch
(Closes: #511740)
* crontab.c: Update the usage() call so that it refers to the use
of -i when removing (-r)
* crontab.1: Update the manpage:
- Use the same option listing as in the crontab usage() call
- Remove 'tweaked', explain what -u does in each context.
- Remove V3, use 'Vixie Cron' instead
(Closes: #572249)
- Update the manpage years (Closes: #563296)
- Describe the usage of the crontab group wrt /var/spool/cron/crontabs
(Closes: #539182)
* Use debhelper compatibility version 5
* Include cross build support with patch to debian/rules provided by Neil
Williams (Closes: #465077)
* Change maintainer's email address
Checksums-Sha1:
397dd9a94f83f5fe3cfd0f8966c22fa41d52c228 1229 cron_3.0pl1-113ubuntu1.dsc
a0a6751ad44d4ecb30e5d8f5a8bd1ada35494464 86519 cron_3.0pl1-113ubuntu1.diff.gz
Checksums-Sha256:
c4775d440645a7a2e15dee9ab17dcac3dcf29c390104ff139d96408b406b265d 1229 cron_3.0pl1-113ubuntu1.dsc
d145d644989ca3c82b4d613d212e526485135d324423fbabbe542c9181bdb496 86519 cron_3.0pl1-113ubuntu1.diff.gz
Files:
4625f5269720cd0c0e366302231e1376 1229 admin important cron_3.0pl1-113ubuntu1.dsc
0b9c797782a5b32e3d4ef41d40ebfc29 86519 admin important cron_3.0pl1-113ubuntu1.diff.gz
Original-Maintainer: Javier Fernandez-Sanguino Pen~a <jfs at debian.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iEYEARECAAYFAkwlHscACgkQW0JvuRdL8BpsEwCfbYW+5AOdGdXvtJdBrhmwcDs/
+OgAn3iRiXtbo9xSNwh1CtGU/t+G9BWC
=zAHO
-----END PGP SIGNATURE-----
More information about the Maverick-changes
mailing list