[ubuntu/maverick] remctl 2.16-1 (Accepted)

Tue Jun 22 18:11:10 BST 2010

remctl (2.16-1) unstable; urgency=low

  * New upstream release.
    - Add Ruby bindings (install libremctl-ruby).
    - Add support for PCRE and regex ACLs in the remctl server.
    - remctld now sets REMCTL_COMMAND to the command run.
  * Use dh_gencontrol -- -V to pass the PHP version substvar instead of
    writing it to the substvars file.
  * Switch to 3.0 (quilt) source format.  Force a single Debian patch and
    include a custom patch header explaining that it is a rollup of any
    fixes cherry-picked from upstream and breaking those patches out
    separately would be work for no gain.

remctl (2.15-3) unstable; urgency=low

  * Make use of the new Makefile variables in the upstream 2.15 release to
    control the Python installation and test suite.  Hopefully fixes
    installation with Python 2.6 as the default.  (Closes: #571509)
  * Fix the PHP tests to work properly with PHP 5.3, which no longer
    passes environment variables through to the running test programs.
  * Downgrade the libremctl-dev dependency on libkrb5-dev to suggests
    since it's only required for static linking.
  * Fix a spelling error in the Net::Remctl man page.
  * Update standards version to 3.8.4 (no changes required).

remctl (2.15-2) unstable; urgency=low

  * Do not add php5 as an alternative to the phpapi dependency in
    php5-remctl, fixing problems with the upcoming PHP 5.3 transition.
    Thanks, Raphael Geissert.  (Closes: #566300)

remctl (2.15-1) unstable; urgency=low

  * New upstream release.
    - Allow the subcommand to be omitted on the remctl command line.
    - New special keyword EMPTY in remctld configuration.
    - Allow use of ALL for the command in the remctld configuration.
    - Fix read of uninitialized memory when parsing ACL files.
  * Fix debian/rules logic for forcing Python module tests to be run using
    the default version of Python.

remctl (2.14-4) unstable; urgency=low

  * Add --install-layout=deb to the Python setup.py install commands to
    support Python 2.6.
  * Add php5-cli to the build dependencies so that the test suite is run.
  * Update to debhelper compatibility level V7.
    - Use debhelper rule minimization with overrides.
    - Skip the test suite if nocheck is set in DEB_BUILD_OPTIONS.
    - Let dh_install handle installation of remctl.conf.
    - Add ${misc:Depends} to all dependencies.
  * Apply a build-time fix to the upstream Makefile to only use the Python
    build directory for the default version of Python.  This is required
    now that make check is run after building Python modules for all
    supported versions.
  * Use the right optimization and warning flags when relinking libremctl.

remctl (2.14-3) unstable; urgency=low

  * Stop including the protocol documentation in remctl-server.  Add a
    pointer to the remctl-client package for protocol documentation in
    remctl-server's README.Debian.
  * Add a doc-base registration file for the remctl protocol specification
    in remctl-client.
  * Do not install the libremctl.la file.  Libtool *.la files force other
    packages using Libtool to declare excessive library dependencies.
  * Add an explicit build-dependency on Perl.  It was being pulled in by
    other build dependencies, but this is more correct.
  * Update standards version to 3.8.3 (no changes required).

remctl (2.14-2) unstable; urgency=low

  * Fix test suite behavior when IPv6 support is available in the library
    but disabled in the kernel.  Thanks, Peter 'p2' De Schrijver.
    (Closes: #530573)
  * Change php5-remctl's section to php to match override.

Date: Tue,  22 Jun 2010 17:59:15 +0100
Changed-By: Evan Broder <evan at ebroder.net>
Maintainer: Russ Allbery <rra at debian.org>
Origin: Debian/unstable
https://launchpad.net/ubuntu/maverick/+source/remctl/2.16-1
-------------- next part --------------
Origin: Debian/unstable
Format: 1.7
Date: Tue,  22 Jun 2010 17:59:15 +0100
Source: remctl
Binary: libremctl1, libremctl-dev, remctl-client, remctl-server, libnet-remctl-perl, php5-remctl, python-remctl, libremctl-ruby, libremctl-ruby1.8, libremctl-ruby1.9.1
Architecture: source
Version: 2.16-1
Distribution: maverick
Urgency: low
Maintainer: Russ Allbery <rra at debian.org>
Changed-By: Evan Broder <evan at ebroder.net>
Closes: 530573 566300 571509
Changes: 
 remctl (2.16-1) unstable; urgency=low
 .
   * New upstream release.
     - Add Ruby bindings (install libremctl-ruby).
     - Add support for PCRE and regex ACLs in the remctl server.
     - remctld now sets REMCTL_COMMAND to the command run.
   * Use dh_gencontrol -- -V to pass the PHP version substvar instead of
     writing it to the substvars file.
   * Switch to 3.0 (quilt) source format.  Force a single Debian patch and
     include a custom patch header explaining that it is a rollup of any
     fixes cherry-picked from upstream and breaking those patches out
     separately would be work for no gain.
 .
 remctl (2.15-3) unstable; urgency=low
 .
   * Make use of the new Makefile variables in the upstream 2.15 release to
     control the Python installation and test suite.  Hopefully fixes
     installation with Python 2.6 as the default.  (Closes: #571509)
   * Fix the PHP tests to work properly with PHP 5.3, which no longer
     passes environment variables through to the running test programs.
   * Downgrade the libremctl-dev dependency on libkrb5-dev to suggests
     since it's only required for static linking.
   * Fix a spelling error in the Net::Remctl man page.
   * Update standards version to 3.8.4 (no changes required).
 .
 remctl (2.15-2) unstable; urgency=low
 .
   * Do not add php5 as an alternative to the phpapi dependency in
     php5-remctl, fixing problems with the upcoming PHP 5.3 transition.
     Thanks, Raphael Geissert.  (Closes: #566300)
 .
 remctl (2.15-1) unstable; urgency=low
 .
   * New upstream release.
     - Allow the subcommand to be omitted on the remctl command line.
     - New special keyword EMPTY in remctld configuration.
     - Allow use of ALL for the command in the remctld configuration.
     - Fix read of uninitialized memory when parsing ACL files.
   * Fix debian/rules logic for forcing Python module tests to be run using
     the default version of Python.
 .
 remctl (2.14-4) unstable; urgency=low
 .
   * Add --install-layout=deb to the Python setup.py install commands to
     support Python 2.6.
   * Add php5-cli to the build dependencies so that the test suite is run.
   * Update to debhelper compatibility level V7.
     - Use debhelper rule minimization with overrides.
     - Skip the test suite if nocheck is set in DEB_BUILD_OPTIONS.
     - Let dh_install handle installation of remctl.conf.
     - Add ${misc:Depends} to all dependencies.
   * Apply a build-time fix to the upstream Makefile to only use the Python
     build directory for the default version of Python.  This is required
     now that make check is run after building Python modules for all
     supported versions.
   * Use the right optimization and warning flags when relinking libremctl.
 .
 remctl (2.14-3) unstable; urgency=low
 .
   * Stop including the protocol documentation in remctl-server.  Add a
     pointer to the remctl-client package for protocol documentation in
     remctl-server's README.Debian.
   * Add a doc-base registration file for the remctl protocol specification
     in remctl-client.
   * Do not install the libremctl.la file.  Libtool *.la files force other
     packages using Libtool to declare excessive library dependencies.
   * Add an explicit build-dependency on Perl.  It was being pulled in by
     other build dependencies, but this is more correct.
   * Update standards version to 3.8.3 (no changes required).
 .
 remctl (2.14-2) unstable; urgency=low
 .
   * Fix test suite behavior when IPv6 support is available in the library
     but disabled in the kernel.  Thanks, Peter 'p2' De Schrijver.
     (Closes: #530573)
   * Change php5-remctl's section to php to match override.
Files: 
 79d0c5f55f72684802b8d171c62e5f55 1454 net optional remctl_2.16-1.dsc
 16ab663ac7f3e74c3e58e8523c4af280 583123 net optional remctl_2.16.orig.tar.gz
 9fef12687cbe5ac1e6aefee86d11b7fd 14650 net optional remctl_2.16-1.debian.tar.gz