[ubuntu/maverick] linux-ti-omap4 2.6.34-900.1 (Accepted)
Sebastien JAN
s-jan at ti.com
Fri Jun 18 22:10:17 BST 2010
linux-ti-omap4 (2.6.34-900.1) maverick; urgency=low
* Initial Texas Instruments OMAP4 kernel for 2.6.34
UBUNTU: [Config] Debian commonization bits from ubuntu-debian
UBUNTU: [Config] Remove debian.master
re-activate SDP4430 platform
UBUNTU: SAUCE: fix changelog for our target release - maverick
UBUNTU: CONFIG: import panda board config
Add OMAP4 Panda defconfig
add panda support for audio
Panda ES1 fixes for MUSB
Add OMAP4 Panda board support
BUG: using smp_processor_id() in preemptible code
UBUNTU: ignore abi and modules
KS8851: Add support for EEPROM MAC address
UBUNTU: New package name: 2.6.34-900
UBUNTU: [Config] align config with omap_4430sdp_defconfig
UBUNTU: [Config] Update to 2.6.34 kernel config
Deactivate CONFIG_MODVERSIONS
UBUNTU: [Config] d-i: exclude nfs-modules check for omap4
Ubuntu config: activate /proc/config
Ubuntu config: activate omap4 flags
Ubuntu config: deactivate DEBUG_LL and PRINTK_TIME
UBUNTU: CONFIG: OMAP4: Built-in SysLink driver
UBUNTU: CONFIG: OMAP4: disable 8250 serial driver
UBUNTU: CONFIG: OMAP4: disable earlyprintk
UBUNTU: CONFIG: OMAP4: disable power management
UBUNTU: CONFIG: OMAP4: disable cgroups
UBUNTU: CONFIG: OMAP4 fix some configs
UBUNTU: CONFIG: turn off LOCALVERSION_AUTO
UBUNTU: CONFIG: disable KGDB
UBUNTU: CONFIG: Disable SysLink for linkage error
UBUNTU: CONFIG: Disable CONFIG_CPU_FREQ for omap4 until fixed the compile issue
UBUNTU: CONFIG: import omap4 default configs
UBUNTU: SAUCE: OMAP4 initial debian packaging
UBUNTU: [Config] enable CONFIG_UNUSED_SYMBOLS
UBUNTU: abi-check -- be more forgiving of the ABI element type
UBUNTU: Bump ABI
UBUNTU: Start new release
UBUNTU: Ubuntu-2.6.33-500.6
UBUNTU: [Config] Compile-in support for MTD-NAND
UBUNTU: [Config] Add bootloader = flash-kernel
UBUNTU: [Config] Compile in FRAMEBUFFER_CONSOLE
UBUNTU: [Config] Disable APM and enable PM_RUNTIME
UBUNTU: [Config] Compile in RTC driver
UBUNTU: [Config] Switch to PREEMPTION_VOLUNTARY
UBUNTU: [Config] Switch to 32KHz timer instead of MPU timer
UBUNTU: [Config] Bump Ramdisk size to 64M and add an enfore rule
UBUNTU: Start new release
UBUNTU: Ubuntu-2.6.33-500.5
UBUNTU: SAUCE: move RLIMIT_CORE pipe dumper marker to 1
UBUNTU: [Config] Disable sound driver for AM3517-EVM boards
UBUNTU: [Config] Enable EHCI port
Revert "UBUNTU: [Config] Enable USB OTG mode"
UBUNTU: [Config] Disable RAMZSWAP
UBUNTU: Start new release
UBUNTU: Ubuntu-2.6.33-500.4
UBUNTU: Start new release
UBUNTU: [Config] Enable various ethernet drivers
UBUNTU: [Config] Enable USB OTG mode
UBUNTU: [Config] Configure DSS2 based on beagle defconfig
UBUNTU: [Config] USB_STORAGE and ATA drivers can be a modules
UBUNTU: [Config] Fix d-i modules
UBUNTU: [Config] Update configuration for new aufs2
UBUNTU: SAUCE: Upgrade aufs2 to latest version for 2.6.33
UBUNTU: [Config] Compile-in display subsystem
UBUNTU: Ubuntu-2.6.33-500.3
UBUNTU: [Config] Enable AUFS and COMPCACHE
UBUNTU: SAUCE: Re-export the symbols for aufs
UBUNTU: SAUCE: Add the ubuntu/ drivers to omap
UBUNTU: [Config] Fix the debug package name to end in -dbgsym
UBUNTU: Start new release
UBUNTU: Ubuntu-2.6.33-500.2
UBUNTU: full source build is not required
UBUNTU: disable tools packages as not support on armel
UBUNTU: debian -- resync debian support with master branch as at 2010-03-17
UBUNTU: [Config] Make unncessary filesytems as modules
UBUNTU: [Config] Disable CONFIG_OMAP_MUX to allow booting on Beagleboard
UBUNTU: [Config] Add a default cmdline for OMAP
UBUNTU: [Config] Enable EARLY_PRINTK for now
UBUNTU: [Config] Enable booting on beagleboard
UBUNTU: Start new release
UBUNTU: getabis -- fix configuration to point to correct source package
UBUNTU: Ubuntu-2.6.33-500.1
UBUNTU: Ubuntu-2.6.33-500.1
UBUNTU: [Config] udeb fixes for packaging
UBUNTU: [Config] OMAP ASoC drivers need to be compiled in
UBUNTU: [Config] Enable several OMAP3 drivers
UBUNTU: [Config] SECURITY_FILE_CAPABILITIES dissapeared in 2.6.33
UBUNTU: [Config] Add support for TI OMAP3
UBUNTU: ubuntu: AppArmor -- update to mainline 2010-03-04
OMAP4: RLS_NOTES: Updating proper MMC & eMMC slot number
OMAP4: RLS_NOTES: Adding RLS NOTES for L24.7
SYSLINK: ipc - fix for occasional module_open failures
Merge branch 'display-next' of git://dev.omapzoom.org/pub/scm/axelcx/kernel-display into L24.7
HDMI HPD IRQ handler
V4L2: Replace spinlock with spinlock_irqsave and restore.
Make tearing effect optional by using a bootarg
DSS2: Use external tearing in panel-taal
Setting VRAM param in bootargs
OMAP4: eresing unnecesary files: piggy.gzip and vmlinux
Fix a bug by making suspend interrupt available in device mode.
musb_core: make disconnect and suspend interrupts work again
OMAP4: omapfb-main_permissions: Putting proper permissions
OMAP4: hsmmc_permissions: Putting proper file permissions.
Merge branch 'display-next' of git://dev.omapzoom.org/pub/scm/axelcx/kernel-display into L24x7
Use pgprot_noncached API in OMAPFB
DPI change to fix build error when DSI PLL enabled
V4L2:Merge FIX Correctly Assign Overalys to Vout devices for OMAP4
Enabling FAKE VSYNC in OMAP4430SDP defconfig
OMAP4: omap_4430sdp_defconfig: Aligning vs .config
Merge branch 'dmm_til_1.0' of git://dev.omapzoom.org/pub/scm/dsin/tiler-omap4 into L24x7
TILER: Extend and move SiTA div points
TILER: Clear PAT irq and status registers after refill
TILER: Fix rotated tiler address calculation.
TILER: Include slab header for kmalloc/kfree calls
TILER: Set correct file permissions
TILER: Fix klocwork defects in tiler_reservex() and tiler_exit()
TILER: Fixed issue with tiler_alloc_packed for 16/32-bit buffers.
TILER: Enable media support
OMAP4: omap-4430board.c: Erasing re-definition
TILER: Relocate entries to the media Kconfig file
TILER: Added reference counting and cleanup. Fixed query bugs.
TILER: Cleaned up SiTA container manager algorithm code
TILER: Added support for auto-packing of tiler blocks.
TILER: Renamed dmm_mem.c to tmm_pat.c to reflect what it is.
TILER: Added support for multiple containers and PAT instances.
TILER: Renamed SiTA tcm files to *tcm_sita*
TILER: Separated SiTA TCM implementation from TCM definition
TILER: Consolidated PAT programming
TILER: Use TCM features for tiler space allocations.
TILER: Update to Linux sizeof conventions and formatting.
TILER: Initial TCM code cleanup
TILER: Initial reorganization of TCM files.
Fixed Bugs, Added memset to sita_pvt in sita_init, updated utils to copy new fields in insert_element
Fixed bugs in sita_init
Moved to New Tiler APIs defined in tcm.h, add multi-continer support Signed-off-by: R Ramachandra <r.ramachandra at ti.com>
Export latest dmm header to mach directory Signed-off-by: David Sin <davidsin at ti.com>
Renamed files with shorter names
free buf info struct if copy_to/copy_from check fails
add NULL checks before returning from dmm_get_page(s) function
TILER: Corrected parameter checking in tiler_alloc_packed_nv12.
new APIs to optimize the freeing of used dmm pages
don't dereference sysptr in tiler_alloc_packed function
correct rot/pack API mismatches; add missing API prototypes
create separate module for tiler area manager (tam)
enable find buffer logic with new algo
tiler driver support for new tiler container algo
add dmm/tiler headers to omap include dir
move error code enums into 2d alloc header
remove unused dmm function declarations
Relocate TILER macro def
Remove unused dmm status and error structures
enable query block
add d2c logic to tiler drv; rework dmm pat refill function
add support to map existing user buffer into tiler
add rotation, packing, and map 1d code
replace page stack logic with new one using kernel lists
additional code corrections to pass next series of mem mgr tests
enable tiler_alloc, mmap, and tiler_free to pass initial tests
add logic to setup PAT and TILER orientation
basic tiler driver
re-format function spacing
replace types with kernel macros
basic dmm driver
Merge branch 'Wlan-next' of git://dev.omapzoom.org/pub/scm/pradeep/wlan-1283 into L24x7
OMAP4: board-4430sdp.c: Adding WLAN configuration
This modification is required when we build Wlan with supplicant
OMAP4: sdio: add TI 128x vendor + device id's
OMAP4: sdio: added structure embedded_sdio_data
mmc: host: wl1283: Support for MMC5 controller TI WLAN
OMAP4: mmc: core: wl1283: add embedded sdio card quirks
sdio: support for WLAN class and sans patch for embedded SDIO
OMAP4: sdio: WLAN-1283 configuration
OMAP4: sdio: WLAN-device registration/reset, Makefile entry
OMAP4: Kconfig modifications for 1283
omap: hsmmc funtionality breaks when CONFIG_PM not define
OMAP4: omap_4430sdp_defconfig: Aligning .config and defconfig
PATCH omap: hsmmc funtionality breaks when CONFIG_PM not define
Merge branch 'omap4_next' of git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into L24x7
Merge branch 'audio-for-24.7' of git://dev.omapzoom.org/pub/scm/misael/kernel-audio into L24x7
OMAP4: omap_4430sdp_defconfig: Fix to avoid overrite of definitions
ASoC: HDMI: Use ASoC framework to set dma_data
ASoC: ABE-TWL6040: Set default volumes to minimum
Merge branch 'display-next' of git://dev.omapzoom.org/pub/scm/axelcx/kernel-display into L24x7
Fix warnings in omap_wb.c
V4L2: Add source files for WB capture device
DSS2: Fixes in DSS2 files for correct writeback functionality
OMAP4: Add wb device in devices.c
V4L2: Writeback changes for omap_vout.c and omap_voutdef.h
V4L2 : Add writeback related structures in Videodev2.h
OMAP4: board_4430sdp: Naming properly &sdp4430_dss_device
OMAP: serial: Disable serial 8250 suspend/resume
OMAP: hwmod: if IDLEST fields are not set, use module defaults
Enabling PicoDLP in OMAP4 defconfig
Enabling DSS in OMAP4 defconfig
Implementing DSS context save restore
Use pgprot_dmacoherent API in OMAPFB
Remove compiler warning from Writeback related patches
Remove compiler warning from pico DLP related patches
Remove compiler warning from Board4430 file
Remove compiler warning from HDMI related patches
OMAP4: Adding MMC3/4/5 controller's support
OMAP4:HSMMC:Enabling power saving
HSMMC: Updating hwmod clock enable and idle calls
OMAP3: HSMMC : Correcting the name in hwmod
OMAP4: FIX HSMMC Controller base
OMAP3_OMAP4:HSMMC:Updating the attribute flags with capabilities
OMAP2/3 MMC: initial conversion to runtime PM
OMAP: MMC (core): split device registration by OMAP
MMC: OMAP HS-MMC: convert to dev_pm_ops
OMAP2/3: hwmod: Add basic HSMMC hardware modules
Revert "OMAP: PM: use omap_device API for suspend/resume"
Merge branch 'omap4_next' of git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into L24x7
Merge branch 'btfm_next' of git://dev.omapzoom.org/pub/scm/raja/L24x-btfm into L24x7
DSS2: Disable lcd_en to in case of framedone timeout
DSS2 Adds HDMI,DSI1,DSI2,DPI2 in wait_for_vsync
DISPC Merge Fix Missing if OMAP3 checks
FB: Add tiler support
FB Temp Not to call update
omap4: fb: Adds missing display update call when panning
MM: Add support for ioremapping multiple strided areas
V4L2: Temporarily write the correct value of global_alpha
DSS2: Support RGB32 format for video1 pipeline on OMAP4
DSS2: printks replaced with DSSDBG in dispc.c
V4L2: picoDLP changes for omap_vout_isr
V4L2: hdmi changes for omap_vout_isr
V4L2: Merge Fix change MAX_OVERLAYS and vout to overlay assignment for OMAP4
OMAP4: configure devices.c to create extra vout object for OMAP4
DSS2 : Remove Taal suspend resume functionality
DSS2 Merge Fix omap4 supported modes to overlays
OMAP: hwmod: remove unnessesary noice in omap_device and omap_hwmod
OMAP: i2c: Add runtime api support in i2c driver
OMAP: omap_device: add flag to disable automatic bus-level suspend/resume
OMAP: PM: use omap_device API for suspend/resume
OMAP: PM: initial runtime PM core support
platform_bus: allow custom extensions to system PM methods
Fix board changes for BH1780 and TMP105
OMAP4: PM: Reset Register bits correction
ASoC: ABE: Add shutdown function for tones
ASoC: SDP4430: Add Aux/FM input pins
ASoC: ABE-TWL6040: Add analog FM support
OMAP4: omap_4430sdp_defconfig: Fix overrite of MEDIA_SUPPORT
Merge branch 'audio-for-24.7' of git://dev.omapzoom.org/pub/scm/misael/kernel-audio into L24x7
OMAP4: syslink_file_permissions: Changing file permissions to 644
OMAP4: omap_4430sdp_defconfig: Fix to avoid overrite SPI configurations
Merge branch 'syslink-v2.6.34-rc6_24_7' of git://dev.omapzoom.org/pub/scm/tisyslink/kernel-syslink into L24x7
OMAP4: proximity_driver: File permissions
ARM: OMAP4: Enable BCI, GPADC in omap_4430sdp_defconfig
add support for BQ24156 AC charger driver
add support for RT GPADC conversion
add support for backup battery
POWER: TWL6030: Battery charger driver
MFD: TWL6030: Add Support for GPADC
omap4: mmc: Fix the regulator resource for MMC2
Board changes for temperature sensor
Revert "Board changes for temperature sensor"
MAP4:defconfig: Enable Bluetooth and dependent components
serial: TTY: Adding new ldisc for TI BT/FM/GPS chips
drivers: misc: Adding FM driver common header
drivers: misc: Adding FM driver Char module sources
drivers: misc: Adding FM driver v4l2 i/f module sources
drivers: misc: Adding FM driver Mixer interface sources
drivers: misc: Adding FM driver core sources
drivers: misc: Adding FM driver ST interface module
drivers: misc: Adding ST based BT driver sources
drivers: misc: Adding ST-FM header file source
drivers: misc: Adding ST header file sources
drivers: misc: Adding ST HCI LL PM protocol sources
drivers: misc: Adding ST Core sources
drivers: misc: Adding ST init manager sources
drivers: misc: Kconfig, Makefile change for ST
OMAP4: 4430SDP: Adding wl128x platform device.
Writeback pipeline support in OMAP4 DSS
OMAP4 : HDMI specific sysfs control to support Hot plug detect
OMAP4:HDMI Library changes to support hot plug detect
OMAP4 : HDMI driver changes to support Hot Plug Detect
Overlay check for TV when switching as TV in OMAP4 doesnt support Downscaling
Modify pico to add suspend and resume support also modify enable and disable
DSS changes for pico DLP
pico_DLP changes in display.h
Makefile and kconfig changes to include pico_DLP
Board-4430sdp.c file change to include Pico DLP panel
DPI changes to include the channel to accommodate LCD2
Add Pico DLP panel to OMAP4
HDMI 9/9 Library to enable the HDMI hardware in OMAP4
HDMI 8/9 EDID related sysfs controls
HDMI 7/9 Makefile change to include hdmi_lib.c build
HDMI 6/9 Makefile and kconfig change
HDMI 5/9 Add HDMI support in dss2
HDMI 4/9 Add HDMI related dss funtion
HDMI 3/9 Modify display.h to include hdmi
HDMI 2/9 Modify board file to add support for HDMI
HDMI 1/9 Add HDMI driver in OMAP4 DSS
DSI:Merge FIX-set default update mode as auto_updtae
V4L2: Merge FIX-Replace virtaddr with phyaddr in omap_vout_mmap
DSI:Merge FIX- set DSI DDRCLKALWAYSON and COMPLEXIO GO bit
usb: musb: Dynamic dma channel allocation in gadget driver
usb: musb: Unmapping the dma buffer when switching to PIO mode
omap4: Enable KEYPAD in pm-defconfig
omap4: pm: Add omap4_pm_defconfig
omap4: Enable 'Unix domain sockets' support in OMAP4430 defconfig
OMAP4: Keyboard: Linux Input Sync Up
OMAP4: hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set
Defconfig changes for tmp105
Board changes for temperature sensor
Add support for TMP105
ASoC:ABE: Remove sample rate converter
ASoC: ABE-TWL6040: Reduce ditigal gains
ASoC: SDP4430: Remove build warnings.
ASoC: TWL6040: Jack detection in codec
ASoC: SDP4430: Add jack detection for machine driver
ASoC: ABE: Enable MM_UL2 instead of MM_UL port
ASoC: ABE: Initialize abe mixers
ASoC: ABE: High pass filter for handsfree
ASoC: ABE-TWL6040: Remove build warnings from codec
ASoC: ABE: Add voice call test configuration
ASoC: McBSP: Add Support for McBSP interfaces in OMAP4
OMAP4: McPDM: Remove build warnings on McPDM driver
ASoC: ABE: Support for mono playback
OMAP4: ABE: Add PM support for ABE module
ASoC: ABE: Remove build warnings
ASoC: OMAP4: Move trigger handling to ABE
ASoC: ABE-TWL6040: Correct widget handling for drivers
ASoC: ABE-TWL6040: Initial mixer configuration
ARM: OMAP4: Enable HDMI audio by default in defconfig
ASoC: HDMI: Change wrapper function names
ARM: OMAP4: Enable audio ALSA support for sdp4430
ASoC: ABE-TWL6040: Add ABE digital mixers in DL path
ASOC: OMAP4: Fix Audio DMA transaction Error
ASoC: ABE-TWL6040: Enable aess_clk only when needed.
ASoC: HDMI: Map HDMI module audio functions to HDMI dai
ASoC: OMAP4: HDMI Audio driver fix for Stereo
ASoC: SDP4430: Add HDMI dai to machine driver
ASoC: OMAP4: HDMI: Add support for HDMI interface
ASoC: OMAP4: Fixes for fullduplex test
ASoC: OMAP4: Avoid multiple McPDM interface requests
ASoC: ABE-TWL6040: Explicitly enable aess_clks
ASoC: OMAP4: Add ABE DAI driver
ASoC: ABE-TWL6040: Adding ABE dais
ASoC: ABE-TWL6040: Moving twl6040.c to abe-twl6040.c
ASoC: ABE: Fixes for hal 6.22
ASoC: ABE: Use ioremap to get ABE virtual address
ASoC: ABE: Add audio HAL06.22
ASoC: ABE: Add coefficients files for audio backend v6.22
ASoC: SDP4430: Set sysclk at init
ASoC: OMAP4: Buffer size should be a multiple of 24
ARM: OMAP4: TWL6040 codec platform data
ARM: OMAP4: Add PM support for McPDM driver
ASoC: McPDM: Add macro OMAP_MCPDM
ARM: OMAP4: Register driver when OMAP_MCPDM is selected
ASoC: TWL6040: Fix playback with 19.2 Mhz MCLK
ASoC: sdp4430 - add sdp4430 pcm ops to DAI.
ASoC: TWL6040: Enable earphone path in codec
ASoC: SDP4430: Add support for Earphone speaker
ASoC: SDP4430: Add sdp4430 machine driver
ARM: McBSP: Add support for omap4 in McBSP driver
ARM: McBSP: Fix request for irq in OMAP4
OMAP: McBSP: Add 32-bit mode support
ASoC: TWL6040: use of kzalloc/kfree requires the include of slab.h
ASoC: Fix file permission of soc/codecs/twl6040.c
ASoC: TWL6040: Change twl macro
ASoC: TWL6040: Add twl6040 codec driver
OMAP4: PMIC: Rename twl6030_codec as twl6040_codec
ASoC: McPDM: Change pdm functional clock name
ASoC: McPDM: Use tabs for indentation in header
ASoC: McPDM: Use tabs for indentation
SYSLINK:IPC-rename heap functions to avoid name collision
Revert "ARM: Defer the L_PTE_EXEC flag setting to update_mmu_cache() on SMP"
OMAP4: hwmod: Add offset to DMA requests line number
OMAP: Remove temporay hack to avoid disabling clock.
Serial: Enable clocks back if disbaled during init.
DISPC uv_scaling changes in plane_info functions
DISPC scale coef 5-3taps
DISPC Add FIR configuration
SYSLINK IPC Message transport add protection to transport functions
SYSLINK IPC messageq transport check the listmp handle
SYSLINK:PROCMGR: Put SYS_M3 in reset before MMU unmap
SYSLINK: Make Syslink Loadable Modules Makefiles
SYSLINK: IPC - Make Syslink Loadable Modules
V4L2 Temp Not to call Update
V4L2 crop support with streaming
V4L2 Multi Display Support in ISR
V4L2 Add Tiler Support voutdef.h
V4L2 Add Tiler Support in vout.c
V4L2 Add Tiler Rotation enum
V4L2 Exclude VRFB for OMAP4
OMAP4 V4L2: Make VRFB depend on OMAP2,3
OMAP3: HWMOD: GPTIMER corrections
Vaibhav V4L2 patches
DSS2 Tiler Support
DSS2 NV12 support in dispc.c
DSS2 NV12,RGB color mode display.h
DSS2 NV12 changes in manager.c
DSS: Change PLL calls in dpi.c brought by introducing DSI2
DSS: Modify core.c to intialize DSI2
DSS2: Change fake_vysnc_irq to generate VSYNC2 for DSI2
OMAP4: Add board information for secondary lcd
DSS: modify select_clock_source functions for enabling DSI2 clocks
DSS: Panel-Taal: Add enum changes to enable secondary lcd
DSI: Incorporate changes to enable DSI2 in dsi.c
DSI: Introduce new enum to differentiate between DSI1 and DSI2
OMAP4 DSS2 Add Zorder support
DSS2:Merge FIX-<fix function calls to dispc_set_clock_div in interface drivers>
DSS2:Merge FIX-<Remove extra return statement in display.c>
DSS2:Merge FIX-<Correct dss_recheck_connections in overlay.c>
DSS2:Merge FIX-<Wait for VSYNC2 when channel is lcd2 in manager.c>
DSS2:Merge FIX-<change function declarations in dss.h and display.h>
DSS2:Merge FIX-<Write to correct registers based on DSS_CHANNEL in dispc.c>
SYSLINK:IPU-PM: add i2c support
SYSLINK:IPU-PM: functions prototypes for ipu_pm
SYSLINK:IPU-PM: Definitions of ipu_pm functions
SYSLINK:IPU-PM: changes to match ipu_pm new code
SYSLINK:IPU-PM: enabling by default ipu_pm
SYSLINK:IPU-PM: build changes for ipu_pm support
Patch for creating more than one FB
OMAP4: merge fix board file
Update defconfig for BH1780 Ambient Light driver
Update board file for BH1780
misc: ROHM BH1780GLI Ambient light sensor Driver
omap4: Disable the 8250 serial driver in defconfig
omap-Serial: Enable omap-serial driver by default
ARM: Defer the L_PTE_EXEC flag setting to update_mmu_cache() on SMP
OMAP4: Add support for Overlay Manager 3 in DSS2
OMAP4: Enable VIDEO 3 pipeline functionality in DSS2.
OMAP4 video 3 pipeline register definitions for enabling VIDEO 3 pipeline in DSS2.
OMAP4: changes in display.h for enabling VIDEO 3 pipeline in DSS2.
DSS2 : Changes for auto-update mode for panel-taal on OMAP4
DSS2 : Panel-taal config changes for OMAP4
OMAP4430SDP : clock changes for DSI PLL on OMAP4
OMAP4430SDP : Backlight changes for primary lcd on OMAP4
DSS2 : IRQ handler for DSI on OMAP4
DSS2 : OMAP4 cnfiguration changes for dsi
DSI Regulator for omap3 DSI
DSI Add DSI for OMAP4
OMAP4 dispc merge bit change DISPC bit for OMAP4 is corrected
OMAP4 dss base address Changes the dss base address for OMAP4
OMAP4 dispc base address Changes the dispc base address for OMAP4
OMAP4 dsi base address Changes the dsi base address for OMAP4
DSS2-TEMP-no clk API calls
OMAP4 irq for DSS OMAP4 does not handle irqs at DSS level, instead seperate lines for dispc
DSS2-TEMP-no clk for OMAP4
OMAP4 add taalpanel support
DSS2 VRFB depends on OMAP2,3
DSS2 OMAP4 support
OMAP3630: DSS2: Updating MAX divider value
OMAP: DSS2: Add ACX565AKM Panel Driver
OMAP: DSS2: TPO-TD03MTEA1: fix Kconfig dependency
OMAP: LCD LS037V7DW01: Add Backlight driver support
OMAP: DSS2: Taal: Fix DSI bus locking problem
OMAP: DSS2: Taal: add mutex to protect panel data
OMAP: DSS2: Make partial update width even
OMAP: DSS2: Fix device disable when driver is not loaded
OMAP: DSS2: VENC: don't call platform_enable/disable() twice
OMAP: DSS2: check lock_fb_info() return value
OMAP: DSS2: fix lock_fb_info() and omapfb_lock() locking order
OMAP: DSS2: Use vdds_sdi regulator supply in SDI
OMAP: DSS2: Remove redundant enable/disable calls from SDI
OMAP: DSS2: Add Kconfig option for DPI display type
Update defconfig for CMA3000 Accelerometer driver
Platform changes for CMA3000 Accelerometer driver
input: CMA3000 Accelerometer Driver
Revert "CMA3000 Accelerometer Driver"
Revert "Correct permission mode for new files"
SYSLINK:iommu-disable twl
omap: iommu-add functionality to get TLB miss interrupt
omap: iommu-update irq mask to be specific about twl and tlb
TILER: Fix rotated tiler address calculation.
TILER: Include slab header for kmalloc/kfree calls
TILER: Set correct file permissions
TILER: Fix klocwork defects in tiler_reservex() and tiler_exit()
TILER: Fixed issue with tiler_alloc_packed for 16/32-bit buffers.
TILER: Enable media support
TILER: Relocate entries to the media Kconfig file
TILER: Added reference counting and cleanup. Fixed query bugs.
TILER: Cleaned up SiTA container manager algorithm code
TILER: Added support for auto-packing of tiler blocks.
TILER: Renamed dmm_mem.c to tmm_pat.c to reflect what it is.
TILER: Added support for multiple containers and PAT instances.
TILER: Renamed SiTA tcm files to *tcm_sita*
TILER: Separated SiTA TCM implementation from TCM definition
TILER: Consolidated PAT programming
TILER: Use TCM features for tiler space allocations.
TILER: Update to Linux sizeof conventions and formatting.
TILER: Initial TCM code cleanup
TILER: Initial reorganization of TCM files.
Fixed Bugs, Added memset to sita_pvt in sita_init, updated utils to copy new fields in insert_element
Fixed bugs in sita_init
Moved to New Tiler APIs defined in tcm.h, add multi-continer support Signed-off-by: R Ramachandra <r.ramachandra at ti.com>
Export latest dmm header to mach directory Signed-off-by: David Sin <davidsin at ti.com>
Renamed files with shorter names
free buf info struct if copy_to/copy_from check fails
add NULL checks before returning from dmm_get_page(s) function
TILER: Corrected parameter checking in tiler_alloc_packed_nv12.
new APIs to optimize the freeing of used dmm pages
don't dereference sysptr in tiler_alloc_packed function
correct rot/pack API mismatches; add missing API prototypes
create separate module for tiler area manager (tam)
enable find buffer logic with new algo
tiler driver support for new tiler container algo
add dmm/tiler headers to omap include dir
move error code enums into 2d alloc header
remove unused dmm function declarations
Relocate TILER macro def
Remove unused dmm status and error structures
enable query block
add d2c logic to tiler drv; rework dmm pat refill function
add support to map existing user buffer into tiler
add rotation, packing, and map 1d code
replace page stack logic with new one using kernel lists
additional code corrections to pass next series of mem mgr tests
enable tiler_alloc, mmap, and tiler_free to pass initial tests
add logic to setup PAT and TILER orientation
basic tiler driver
re-format function spacing
replace types with kernel macros
basic dmm driver
OMAP4: Hack for not disabling the clocks
OMAP4: Correcting the gp timer clock info in the hwmod data base.
OMAP: Convert dual mode timer into a platform driver.
OMAP1: Dual mode timer device registration.
OMAP2/3/4 : Dual mode timer device registration.
OMAP3: Add hwmod data for OMAP3 dual mode timers
Fix board data to support device only, host only and OTG roles.
Fix TWL6030 module name in MUSB driver.
SYSLINK: mailbox - comment out mailbox clocks for OMAP4
omap: iommu- update ducati mmu irq define name
SYSLINK: kernel 2.6.34 migration changes
omap: mailbox: convert block api to kfifo
omap iommu: introduce iteration macro for iotlb entry scan
OMAP:iommu- add TLB preservation support
OMAP:iommu - missing check for TLB valid entry
OMAP:iommu support for OMAP4
OMAP:iommu renamed omap3-iommu to omap-iommu
SYSLINK: ListMP KW fix for release 24.6
SYSLINK: Proc4430 module KW defect fixed for release 24.6
SYSLINK:proc-remove annoying printk
SYSLINK:IPU-PM: add definitions for IPU-PM functions
SYSLINK:IPU-PM: add prototypes for IPU-PM functions
SYSLINK:IPU-PM: add notifications function call
SYSLINK:IPU-PM: register the IPU PM events
SYSLINK:IPU-PM: Add IPU PM code to kernel via Menuconfig
SYSLINK remove the mutex protection while sending the mailbox messages
omap: mailbox: rwlocks to spinlock: compilation fix
omap: mailbox: convert block api to kfifo
omap: mailbox: fix reverse likeliness
omap: mailbox cleanup: split MODULE_AUTHOR line
omap: mailbox cleanup: convert rwlocks to spinlock
SYSLINK: proc-config option to load base image
SYSLINK: notify-payload getting manipulated in notify isr
SYSLINK: ipc - messageq transport remove waiting for Ducati to clear the flag
SYSLINK: auto select mailbox framework when notify is selected
Revert "ARM: dma-mapping: remove dmac_clean_range and dmac_inv_range"
ARM: UNOFFICIAL_USER_DMA_API
syslink: better handling for interrupted system calls
SYSLINK: notify - remove notify_dispatcher from build
SYSLINK: remove unused code
SYSLINK: remove tesla related file
SYSLINK: ipc - remove execute permission on syslink header files
Syslink: Fix the page attributes set in mmpa for ARMv7 architectures
SYSLINK:notify-remove redunant check in notify send event
omap: mailbox: mbox_tx work done directly
SYSLINK: ipc - fixes for critical nameserver bugs
SYSLINK: ipc - gatepeterson_open handles error cases properly
SYSLINK: procmgr - remove compile warnings in ducatienabler
SYSLINK: procmgr - remove module section mismatch warning
SYSLINK: ipc - reference count for shared regions
SYSLINK: 2.6.33 migration - remove duplicate page_to_phys definition
SYSLINK: 2.6.33 migration - adjust for include files move to plat
SYSLINK: 2.6.33 migration - adjust for location of autoconf.h
OMAP4:Mailbox-retries in case of FIFO full
SYSLINK: fix error with handling of return code in case of interrupted system call
SYSLINK: Stabilize IPC for multithreaded applications
SYSLINK: ipc - call notify send event with true sycn flag
Syslink: Enable Syslink modules as default built
SysLink Notify kernel KW-fixes
SYSLINK: ipc - kw defect fixes #2
SYSLINK: procmgr - kw defect fixes
SYSLINK: notify - kw defect fixes
SYSLINK: sysmgr - kw defect fixes
SYSLINK: ipc - kw defect fixes
SYSLINK:IPC don't use down_timeout to wait forever
SYSLINK: ipc - sysmgr acknowledges handshakes
SYSLINK: enable MMU fault notification in Ducati
SYSLINK: proc4430 - ensure correct ducati reset sequence
SYSLINK: procmgr - format the MMU dump properly.
SYSLINK:proc-add VM_RESERVED flag to prevent swapping
SYSLINK: sysmgr - adjust ducati memory map for 512MB
SYSLINK: procmgr - adjust ducati memory map for 512MB
enable mailbox framework
SYSLINK:proc-use OMAP2_L4_IO_ADDRESS instead of IO_ADDRESS
SYSLINK PROCMGR Fix to support multiple load/run of ducati samples
SYSLINK: sysmgr - ioctl call to stopcallback sets return status
SYSLINK: procmgr - Removed extra ducati_destroy call from proc4430_destroy
SYSLINK:proc-fix in ducati enabler hw mmu module
SYSLINK: ipc - conditional check added before printing some traces
SYSLINK: sysmgr - changes to update to new memory map
SYSLINK: Ducati fix for 16MB TLB updated
SYSLINK: procmgr - adjust memory map for SDC
SYSLINK:ipc-de-couple sysmanager from Proc module
SYSLINK NOTIFY Patch to fix premature read ioctl exit, iounmap related memory leak.
SYSLINK NOTIFY Patch to cleanup notify_ducati module
SYSLINK:proc-changes to proc start and stop
revert back to hw_mmu to test TLB entry changes in mmu
SYSLINK: ipc - platform cleanup loads config info
SYSLINK:ipc:notify drv read fix
SYSLINK:ipc-fix compile warning in platform_destroy
SYSLINK: procmgr - Converted the procmgr driver module to platform driver model.
SYSLINK: ipc - fixes/ additions in ducatienabler and notify_ducati driver.
SYSLINK: ipc - fix in notify_dispatcher.
SYSLINK: ipc - fix in platform_mem.
SYSLINK: ipc - fixes in proc4430 and platform.
SYSLINK: ipc - heapbuf_close frees obj
SYSLINK: notify - ducatidrv frees event listener
SYSLINK: ipc - cleanup for platform_mem
SYSLINK: proc4430 - Reserve memory alignment
SYSLINK: ipc - Enable SWDMM memory region in SysMgr
SYSLINK: ipc - Fixed cleanup order of operations
SYSLINK: sysmgr - Updated error message strings
Syslink-Fixed platform heapbuf cleanup order
SYSLINK: PROCMGR - Patch to move to syslink version 2.0.0.12
SYSLINK NOTIFY Patch to migrate Notify module to Syslink version 2.0.0.12
SYSLINK: ipc - bug fixes incorporated from SysLink 2.00.00.12
SYSLINK:proc-add virt to phys and map tiler functionality
SYSLINK IPC Patch to accomodate the use of multiple heaps
SYSLINK: ipc - removed gt_traces in remaining IPC modules
SYSLINK: ipc - removed gt_traces from messageq modules
SYSLINK: ipc - removed gt_traces from listmp modules
SYSLINK: ipc - removed gt_traces from messageq_transportshm & heapbuf modules
SYSLINK IPC-SYSMGR Patch to cleanup modules in the platform_destroy() function.
SYSLINK: ipc - minor fix in heapbuf
SYSINK:IPC-make sysmanager option default
SYSLINK: ipc - fixes in messageq and nameserver_remotenotify
add UART mapping to ducati
SYSLINK NOTIFY DUCATI Patch to fix notifyshm driver open call.
SYSLINK platform attach proc handles
Subject: SYSLINK SysMgr setup for AppM3
SYSLINK Procmgr add proc id param for Proc stop.
SYSLINK:notify-fix the notify setup bug
SYSLINK:notify-fix checkpatch warnings
SYSLINK:notify-move the mailbox init to setup
SYSLINK:ipc-fixes to sys manager
SYSINK:ipc-add sys manager config option
Subject: SYSLINK fixes for shutdown stage
SYSLINK:ipc-sys manager structure fixes
SYSLINK:sys manager changes and bug fixes
SYSLINK: ipc - sharedregion fixes for sysmgr validation
SYSLINK: ipc - fix messageq create and delete
SYSLINK: ipc - Add SysMgr & SysMemMgr
SYSLINK: ipc - fix listmp_sharedmemory list initialization
SYSLINK: ipc - fix issues with nameserver_get functions
SYSLINK: ipc - fix heapbuf issues in open, create & delete
SYSLINK: procmgr - correct static physical memory address
SYSLINK:ipc-listmp sharedmemory delete procid check
SYSLINK:ipc-gatepeterson open shared address fix
MAILBOX select mailbox driver by default ver 2
Syslink IPC SharedRegion Fix
MAILBOX select mailbox driver by default
SYSLINK: ipc - decrement reference count properly.
SYSLINK NOTIFY MODULE Patch to fix the WARN_ON in notify_register()
SYSLINK Notify-Ducati Adds support to use open source mailbox changes.
SYSLINK NOTIFY DUCATI - Removes notify ducati module's dependency on Notify dispatcher in the Kconfig.
SYSLINK:ipc-fixes for sharedregion_get_table_info
SYSLINK DUCATI change the the proc control structure
Syslink IPC MultiProc Fix
SYSLINK Proc4430 added dependancy on IOMMU
SYSLINK: procmgr - relocated procmgr.h
SYSLINK Notify-Ducati Adds syslink specific atomic functions to check and set driver state.
SYSLINK Notify IPC migrations to include syslink specific atomic calls
SYSLINK Notify - Adds IPC migrations to the Notify driver module.
SYSLINK ProcMgr fix for Procmgr Start procid
SYSLINK:proc changes to adapt to sys manager and ipc
SYSLINK Ducati reduce the DMM pool size
SYSLINK Heapbuf aligned with IPC 50 and Syslink 2_00_00_08 changes
Syslink IPC ListMP, messageQ aligned with 2_00_00_08
Syslink IPC GatePeterson aligned with Syslink drop 2_00_00_06
ARM OMAP4 Syslink Utils Platform mem module
ARM OMAP4 Syslink IPC ListMP, ListMP SharedMem Changes
ARM OMAP4 Syslink IPC MessageQ, MessageQ Transport Changes
ARM OMAP4 Syslink IPC Shared Region Changes
ARM OMAP4 Syslink IPC NameServer,NameServer Notify Changes
ARM OMAP4 Syslink IPC Multiproc
ARM OMAP4 Syslink atomic function header
SYSLINK:proc-adapt proc module to iommu module
SYSLINK:proc-changed the procmgr ioctl base
SYSLINK:notify-fix ioctl issue with 2.6.31 kernel
fix ipc compile errors
SYSLINK Proc reduce the default DMM pool size
SYSLINK: ipc - remove a WARN_ON in sharedregion module
SYSLINK: ipc - nameserver_get returns properly for nameserver_get_local
SYSLINK: ipc - remove unnecessary printks
ARM OMAP4 Syslink IPC heapbuf destroy fix
SYSLINK proc remove unnecessary WARN_ON
SYSLINK: ipc - fixes in nameserver_remotenotify callback
ARM OMAP4 Syslink IPC gatepeterson, nameserver remote notify fix
SYSLINK: Reorganize Syslink Kconfig
SYSLINK:proc-print l4 info and fix tlb entries print
SYSLINK:proc-start and stop functionality
SYSLINK:proc-add l4entries and fix checkpatch warnings
Syslink: Notify - Patch uses Multiproc API in the Notify module.
SysLink : Notify - Patch to add udev support for ipcnotify and ducati notify modules.
Syslink: Notify Module This patch allows the notify module to be configured for SysM3 and AppM3
SYSLINK: ipc - fix the invalid comparision in sharedregion_add
ARM OMAP4 Syslink IPC MessageQ, Notify Fix
PROCMGR: updated with couple of changes for procmgr unmap Updated the ducatienabler.c file to get the procmgr Ummap function working. also updated the procmgr_drv.c file with a minor update
Syslink: Notify,various fixes on Notify driver to support notify functionality on the kernel/user side
SYSLINK: ipc - fix messageq bugs
Syslink: Patch to resolve issues in IPC components nameserver, nameserver notify and messageQ.
Syslink: Patch to resolve Notify shared memory configuration issue.
Syslink: Patch to resolve Notify structure padding issue.
Syslink: Patch to resolve multiple ISR invocation
SYSLINK: notify-remove white spaces
Patch to re-organize notify shm data structures
SYSLINK: ipc - heapbuf bug fixes
SYSLINK: ipc - replaced mutex with gatepeterson in listmp_sharedmemory
SYSLINK: ipc - remove extra member from listmp_params
SYSLINK: ipc - fix listmp_sharedmemory issues in heapbuf_open and heapbuf_create
SYSLINK: ipc - fix for listmp_sharedmemory_destroy
SYSLINK: ipc - bug fixes for listmp_sharedmemory_open and api_status
SYSLINK: ipc - minor fixes in sharedregion and gatepeterson driver
OMAP4 syslink ipc add notify dependancy in Kconfig
SYSLINK: ipc - minor bug fixes in listmp_sharedmemory module
OMAP4 syslink ducati header file format
OMAP4 syslink header file cleanup 2
OMAP4 Syslink header file cleanup
OMAP4 syslink dispatcher code format fix
OMAP4 Syslink Notify driver fix format
SYSLINK: ipc - fixed return status for gatepeterson_open
OMAP4 Syslink proc module code format fix
SYSLINK:proc-dmm fixes for user space buffers
SYSLINK: proc4430 - store physical address into user virtual address
SYSLINK:proc-fix the map attributes for DMM.
SYSLINK: ipc - exported multiproc functions
SYSLINK:proc-fixes to proc module
SYSLINK: procmgr - added copy_from_user for mem_entries
SYSLINK: ipc - fixed the setup api issues with messageq
OMAP4 Syslink ducati driver coding format fix
OMAP4 Syslink remove unused file
OMAP4 Syslink notify driver coding format fix
OMAP4 Syslink dispatcher code format fix
ARM OMAP Syslink proc manager open fix
SYSLINK:proc-added proc4430 attach and detach
SYSLINK:proc-fix the issue with mem entries
ARM OMAP Syslink IPC removal of multiple header inclusions
ARM: OMAP Syslink IPC ioctl module variable name changes
OMAP4 Syslink ducati driver checkpatch fix
OMAP4 syslink dispatcher checkpatch fixes
SYSLINK-Proc-fixes in proc4430 driver
ARM: OMAP Syslink IPC ioctl module fixes
OMAP4 Syslink use kernel bitops functions
OMAP4 Syslink remove unused file
OMAP4 Syslink mailbox header cleanup
OMAP4: Syslink dispatcher header files cleanup
OMAP4 syslink ducati header file format changes
SYSLINK: ipc - fixed api return status in messageq and listmo
SYSLINK: ipc - renamed omap_ipc to syslink_ipc
SYSLINK: ipc - removed OsalSemaphore
IPC SharedRegion module fixes
IPC GatePeterson module fixes
IPC HeapBuf module fixes
OMAP4 syslink remove unused files
Cleanup for ducati ioctl
PROCMGR - fix unregistering the module
Updated OMAP4 IRQ definitions in notify dispatcher
remove tesla driver from syslink
Chech patch fixes in ducati driver Chech patch fixes in ducati driver
syslink: corrected checkpatch warnings in ipc modules
syslink: messageq and multiproc synched to IPC-b33
proc4430_translate_addr implementation
procmgr: updated with a fix for a minor issue Updated with a fix for a minor issue with the procmgr_create the procmgr state table was not getting updated with the procmgr handle
IPC Added IOCTL I/F for NameServer Remote Notify modules This is to sync with the latest syslink drop(version 2.0)
IPC_Fix_Nameserver_And_Multiproc This includes the fixes in nameserver and multiproc modules during testing.
Fix a minor bug in proc module Fix a minor bug in proc module
notify disable fix notify disable fix
Fix issues with notify_disable/restore Fix issues with notify_disable/restore
fixed checkpatch warning in proc4430
ProcMgr: Resolved few bugs within the ioctl function. resolved few bugs observed within the ioctl function
updated dmm start and size information for DUCATI
plug dmm with proc module
removed bug on that is not needed
syslink: corrected the signature of the notify callback functions in ipc
SYSLINK: IPC support for OMAP4
OMAP3: hwmod: add omap_hwmods for UART1,2,3
Serial: Update UART HWMOD layer.
OMAP: UART: omap_device converions, remove implicit 8520 assumptions
serial: Add OMAP high-speed UART driver
Proximity: Board changes for the proximity sensor
SFH7741 defconfig changes
SFH7741 : Proximity switch changes
OMAP4: GPIO: Add gpio dev_attr to hwmod struct
RTC: TWL6030: Don't use i2c burst read for OMAP4
OMAP: i2c: Fix max number of controllers
OMAP4 HSMMC: Adding Card detect support for MMC1
OMAP HSMMC: Adding flag to determine Card detect type
OMAP4 HSMMC: Enable HSMMC support
OMAP4 HSMMC: Adding PBIAS Configuration for MMC1 controller
OMAP4 HSMMC: Adding hsmmc support to board file
OMAP4 HSMMC: Adding dummy interface clocks for HSMMC
Fix omap3_defconfig build error
ARMv7: Fix typo in commit 8f4d29bc
OMAP3: I2C: Convert i2c driver to use omap_device/omap_hwmod
OMAP: I2C: split device registration; convert OMAP2+ to omap_device
OMAP3: hwmod: add I2C hwmods for OMAP3430
OMAP: GPIO: Fix OMAP4 GPIO reg access issues
OMAP: GPIO: Remove omap_gpio_init()
OMAP: GPIO: Implement GPIO as a platform device
OMAP: GPIO: Introduce support for OMAP2PLUS chip GPIO init
OMAP: GPIO: add GPIO hwmods structures for OMAP243X
OMAP: GPIO: add GPIO hwmods structures for OMAP242X
OMAP: GPIO: add GPIO hwmods structures for OMAP3
OMAP: GPIO: Introduce support for OMAP7xx chip GPIO init
OMAP: GPIO: Introduce support for OMAP16xx chip GPIO init
OMAP: GPIO: Introduce support for OMAP15xx chip GPIO init
OMAP: GPIO: Include platform_data structure for GPIO
OMAP: GPIO: Modify init() in preparation for platform device implementation
omap4: Fix multi-omap boot with reset un-used clocks
ARMv7: Use the Inner Shareable I-cache on MP
MCBSP: Fix the read and the write calls
Remove the following warning
MCBSP: Frame sync fix
MCBSP DMA support patch
MCSPI: ditectory change
Board support changes for spi test
McSPI slave support
USB: MUSB: Fix enumeration when device connected at boot up.
USB: MUSB: Add phoenix initialization under OMAP4.
USB : MUSB : Phoenix settings for Host mode
USB : MUSB : Phoenix settings for USB device mode
This patch adds CONFIG_ARCH_OMAP4 macro within MUSB driver.
This patch updates the Makefile to build the MUSB driver for OMAP4. It also sets the Kconfig options for OMAP4.
Program the OTG_INTERFSEL register based on transcevier type passed from board file.
Remove hack to disable MUSB from board file
Revert "USB: MUSB: Set transceiver interface type" Take the USB patches in Greg's queue. This reverts commit 3f78c9561bcc429483ed0e4580a2bdef4bdfb981.
Revert "USB: MUSB: Enable MUSB for OMAP4 in Kconfig" Take the USB patches in Greg's queue. This reverts commit 9820ae36962e2ea963e6531b8bf718c6c47831b0.
Revert "USB: MUSB: Add OMAP4 support in MUSB driver" Take the USB patches in Greg's queue. This reverts commit 14191d218e04d35c85e41d24a476e6bb545cbfbf.
Revert "USB : MUSB : Phoenix settings for USB device mode" Rebase as per patches in Greg's queue. This reverts commit c2e4bc7b9ea58592edecd0f0956c684e6a854eb4.
Revert "USB : MUSB : Phoenix settings for Host mode" Rebase as per patches in Greg's queue. This reverts commit 0d1bed47a9bef6ee35d573762f2b0e640e555fc8.
Revert "USB: MUSB: Add phoenix initialization under OMAP4." Rebase as per patches in Greg's queue. This reverts commit cc32231c8cb88a867ed2dd988c693448a0723146.
Revert "USB: MUSB: Fix enumeration when device connected at boot up." Rebase as per patches in Greg's queue. This reverts commit 1fee74df577a2582a20f81617174ca66d3b9ad8d.
Revert "omap3: fix build break when building for 3430" Not needed with USB patches from Greg's queue This reverts commit 05c5a515661c59574f9f9311c229f7cc904d5997.
OMAP4: Defconfig: Enable Touchscreen
OMAP4: Touchscreen: Board Support
OMAP4: Touchscreen: Header File Dependency
OMAP4: Touchscreen: Controller Identification
OMAP4: Touchscreen: Initial Driver Support
OMAP4: Keyboard kernel configuration
OMAP4: Keyboard board support
OMAP4: Keyboard controller support
Input: matrix_keypad: Device driver interfaces
OMAP4: Ethernet: GPIO Handling
Revert "ARM: Defer the L_PTE_EXEC flag setting to update_mmu_cache() on SMP"
OMAP4: PM: Fix prm/cm accessor api's for register access
twl6030: regulator: Remove vsel tables and use formula for calculation
omap3: fix build break when building for 3430
Revert "ARM : OMAP4 : Add USB support to 4430 SDP board file"
sDMA: descriptor autoloading feature
Revert "sDMA: Descriptor autoloading feature"
OMAP: clocks: DEFAULT_RATE flag missing in rate structs
OMAP4: PRCM: Enable DPLL autoidle and autogating for post dividers
OMAP4: suspend: Basic system suspend supporting wfi
OMAP4: net: Add suspend/resume hooks
OMAP4: CPUidle: Basic CPUidle support for OMAP4
ARM: Add cpu_idle_wait() support for ARM architecture
omap4: hotplug: Basic CPU HOTPLUG support
omap4: Add smc API to read AuxCoreBoot0 register
OMAP4: PRCM: Add offset defines for all PRM registers
OMAP4: PRCM: Add offset defines for all CM registers
OMAP4: PRCM: Remove duplicate definition of base
OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention
OMAP4: CM: Remove non-functional registers in ES1.0
OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains
OMAP4 clockdomain: Fix omap2_clkdm_clk_enable/disable api for 44xx
OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains
OMAP: timers: Fix clock source names for OMAP4
OMAP4 clock: Support clk_set_parent
OMAP: hwmod: Temp fixes to get hwmod registers work
OMAP4: hwmod: Add remaining hwmod support for
OMAP: hwmod: Temporary disable dependency
OMAP4: hwmod: Enable omap_device build for OMAP4
OMAP4: hwmod: Enable omap_hwmod build for OMAP4
OMAP4: hwmod: Add partial hwmod support for
OMAP: HWMOD: Replace WARN by pr_warning for clockdomain check
OMAP: HWMOD: Rename OMAP hwmod name for the MPU
OMAP: HWMOD: Do not exit the iteration if one clock init failed
OMAP: HWMOD: Replace WARN by pr_warning after clock lookup
OMAP: HWMOD: Remove IS_ERR check with omap_clk_get_by_name return value
OMAP: HWMOD: Fix wrong pointer iteration in oh->slaves
OMAP4: HWMOD: Replace OCPIF_HAS_IDLEST by HWMOD_NO_IDLEST
OMAP4: HWMOD & CM: Implement the omap4_cm_wait_module_ready function
OMAP: CM: Move MAX_MODULE_READY_TIME to cm.h
OMAP4: HWMOD: Replace module & device offsets by absolute clkctrl address
ARM: Enable userpsace THUMB options
omap4: errata: axi2ocp errata work-around for ES1.0
Correct permission mode for new files
CMA3000 Accelerometer Driver
Proximity : Proximity sensor enable in kernel config
USB: Avoid DMA mapping of control transfer buffers.
ARM: Improve the L2 cache performance when PL310 is used
KS8851: Destroy ethernet work queue in exit path
KS8851: Use dedicated work queue for ethernet.
USB: MUSB: Fix enumeration when device connected at boot up.
USB: MUSB: Add phoenix initialization under OMAP4.
Fix for bus width which improves SD card's peformance.
OMAP: Add printk and correct LL debug
sDMA: Descriptor autoloading feature
USB : MUSB : Phoenix settings for Host mode
USB : MUSB : Phoenix settings for USB device mode
OMAP4: Enable Mentor USB options in defconfig
USB: MUSB: Add OMAP4 support in MUSB driver
USB: MUSB: Enable MUSB for OMAP4 in Kconfig
USB: MUSB: Set transceiver interface type
ARM : OMAP4 : Add USB support to 4430 SDP board file
SRAM: hack it to non-cached for EMU
Remove the domain switching on ARMv6k/v7 CPUs
Add "nol2x0" early param to avoid initialisation of the L2 controller
Correct the cpu_architecture() function for ARMv7
smsc911x: Add spinlocks around registers access
Call flush_dcache_page in usb_stor_access_xfer_buf
ARM: Defer the L_PTE_EXEC flag setting to update_mmu_cache() on SMP
ARM: Assume new page cache pages have dirty D-cache
ARM: Use lazy cache flushing on ARMv7 SMP systems
OMAP4: Networking: Defconfig Support
OMAP4: Ethernet: KS8851 Board Support
OMAP4: SPI: Fix Driver Kconfig
omap: i2c: Add i2c support on omap4 platform
omap4: add i2c1 peripherals data
omap4: Enable RTC and regulator support
omap4: Add i2c board support on omap4430 sdp platform
omap4: Move SOC specific code from board file
Date: Thu, 10 Jun 2010 16:56:00 +0200
Changed-By: Sebastien JAN <s-jan at ti.com>
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
Signed-By: Tim Gardner <tim.gardner at canonical.com>
https://launchpad.net/ubuntu/maverick/+source/linux-ti-omap4/2.6.34-900.1
-------------- next part --------------
Format: 1.8
Date: Thu, 10 Jun 2010 16:56:00 +0200
Source: linux-ti-omap4
Binary: linux-headers-2.6.34-900 linux-image-2.6.34-900-omap4 linux-headers-2.6.34-900-omap4 linux-image-2.6.34-900-omap4-dbgsym
Architecture: source
Version: 2.6.34-900.1
Distribution: maverick
Urgency: low
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
Changed-By: Sebastien JAN <s-jan at ti.com>
Description:
linux-headers-2.6.34-900 - Header files related to linux-ti-omap4 kernel version 2.6.34
linux-headers-2.6.34-900-omap4 - Linux kernel headers for version 2.6.34 on OMAP4-based systems
linux-image-2.6.34-900-omap4 - Linux kernel image for version 2.6.34 on OMAP4-based systems
linux-image-2.6.34-900-omap4-dbgsym - Linux kernel debug image for version 2.6.34 on OMAP4-based system
Changes:
linux-ti-omap4 (2.6.34-900.1) maverick; urgency=low
.
* Initial Texas Instruments OMAP4 kernel for 2.6.34
UBUNTU: [Config] Debian commonization bits from ubuntu-debian
UBUNTU: [Config] Remove debian.master
re-activate SDP4430 platform
UBUNTU: SAUCE: fix changelog for our target release - maverick
UBUNTU: CONFIG: import panda board config
Add OMAP4 Panda defconfig
add panda support for audio
Panda ES1 fixes for MUSB
Add OMAP4 Panda board support
BUG: using smp_processor_id() in preemptible code
UBUNTU: ignore abi and modules
KS8851: Add support for EEPROM MAC address
UBUNTU: New package name: 2.6.34-900
UBUNTU: [Config] align config with omap_4430sdp_defconfig
UBUNTU: [Config] Update to 2.6.34 kernel config
Deactivate CONFIG_MODVERSIONS
UBUNTU: [Config] d-i: exclude nfs-modules check for omap4
Ubuntu config: activate /proc/config
Ubuntu config: activate omap4 flags
Ubuntu config: deactivate DEBUG_LL and PRINTK_TIME
UBUNTU: CONFIG: OMAP4: Built-in SysLink driver
UBUNTU: CONFIG: OMAP4: disable 8250 serial driver
UBUNTU: CONFIG: OMAP4: disable earlyprintk
UBUNTU: CONFIG: OMAP4: disable power management
UBUNTU: CONFIG: OMAP4: disable cgroups
UBUNTU: CONFIG: OMAP4 fix some configs
UBUNTU: CONFIG: turn off LOCALVERSION_AUTO
UBUNTU: CONFIG: disable KGDB
UBUNTU: CONFIG: Disable SysLink for linkage error
UBUNTU: CONFIG: Disable CONFIG_CPU_FREQ for omap4 until fixed the compile issue
UBUNTU: CONFIG: import omap4 default configs
UBUNTU: SAUCE: OMAP4 initial debian packaging
UBUNTU: [Config] enable CONFIG_UNUSED_SYMBOLS
UBUNTU: abi-check -- be more forgiving of the ABI element type
UBUNTU: Bump ABI
UBUNTU: Start new release
UBUNTU: Ubuntu-2.6.33-500.6
UBUNTU: [Config] Compile-in support for MTD-NAND
UBUNTU: [Config] Add bootloader = flash-kernel
UBUNTU: [Config] Compile in FRAMEBUFFER_CONSOLE
UBUNTU: [Config] Disable APM and enable PM_RUNTIME
UBUNTU: [Config] Compile in RTC driver
UBUNTU: [Config] Switch to PREEMPTION_VOLUNTARY
UBUNTU: [Config] Switch to 32KHz timer instead of MPU timer
UBUNTU: [Config] Bump Ramdisk size to 64M and add an enfore rule
UBUNTU: Start new release
UBUNTU: Ubuntu-2.6.33-500.5
UBUNTU: SAUCE: move RLIMIT_CORE pipe dumper marker to 1
UBUNTU: [Config] Disable sound driver for AM3517-EVM boards
UBUNTU: [Config] Enable EHCI port
Revert "UBUNTU: [Config] Enable USB OTG mode"
UBUNTU: [Config] Disable RAMZSWAP
UBUNTU: Start new release
UBUNTU: Ubuntu-2.6.33-500.4
UBUNTU: Start new release
UBUNTU: [Config] Enable various ethernet drivers
UBUNTU: [Config] Enable USB OTG mode
UBUNTU: [Config] Configure DSS2 based on beagle defconfig
UBUNTU: [Config] USB_STORAGE and ATA drivers can be a modules
UBUNTU: [Config] Fix d-i modules
UBUNTU: [Config] Update configuration for new aufs2
UBUNTU: SAUCE: Upgrade aufs2 to latest version for 2.6.33
UBUNTU: [Config] Compile-in display subsystem
UBUNTU: Ubuntu-2.6.33-500.3
UBUNTU: [Config] Enable AUFS and COMPCACHE
UBUNTU: SAUCE: Re-export the symbols for aufs
UBUNTU: SAUCE: Add the ubuntu/ drivers to omap
UBUNTU: [Config] Fix the debug package name to end in -dbgsym
UBUNTU: Start new release
UBUNTU: Ubuntu-2.6.33-500.2
UBUNTU: full source build is not required
UBUNTU: disable tools packages as not support on armel
UBUNTU: debian -- resync debian support with master branch as at 2010-03-17
UBUNTU: [Config] Make unncessary filesytems as modules
UBUNTU: [Config] Disable CONFIG_OMAP_MUX to allow booting on Beagleboard
UBUNTU: [Config] Add a default cmdline for OMAP
UBUNTU: [Config] Enable EARLY_PRINTK for now
UBUNTU: [Config] Enable booting on beagleboard
UBUNTU: Start new release
UBUNTU: getabis -- fix configuration to point to correct source package
UBUNTU: Ubuntu-2.6.33-500.1
UBUNTU: Ubuntu-2.6.33-500.1
UBUNTU: [Config] udeb fixes for packaging
UBUNTU: [Config] OMAP ASoC drivers need to be compiled in
UBUNTU: [Config] Enable several OMAP3 drivers
UBUNTU: [Config] SECURITY_FILE_CAPABILITIES dissapeared in 2.6.33
UBUNTU: [Config] Add support for TI OMAP3
UBUNTU: ubuntu: AppArmor -- update to mainline 2010-03-04
OMAP4: RLS_NOTES: Updating proper MMC & eMMC slot number
OMAP4: RLS_NOTES: Adding RLS NOTES for L24.7
SYSLINK: ipc - fix for occasional module_open failures
Merge branch 'display-next' of git://dev.omapzoom.org/pub/scm/axelcx/kernel-display into L24.7
HDMI HPD IRQ handler
V4L2: Replace spinlock with spinlock_irqsave and restore.
Make tearing effect optional by using a bootarg
DSS2: Use external tearing in panel-taal
Setting VRAM param in bootargs
OMAP4: eresing unnecesary files: piggy.gzip and vmlinux
Fix a bug by making suspend interrupt available in device mode.
musb_core: make disconnect and suspend interrupts work again
OMAP4: omapfb-main_permissions: Putting proper permissions
OMAP4: hsmmc_permissions: Putting proper file permissions.
Merge branch 'display-next' of git://dev.omapzoom.org/pub/scm/axelcx/kernel-display into L24x7
Use pgprot_noncached API in OMAPFB
DPI change to fix build error when DSI PLL enabled
V4L2:Merge FIX Correctly Assign Overalys to Vout devices for OMAP4
Enabling FAKE VSYNC in OMAP4430SDP defconfig
OMAP4: omap_4430sdp_defconfig: Aligning vs .config
Merge branch 'dmm_til_1.0' of git://dev.omapzoom.org/pub/scm/dsin/tiler-omap4 into L24x7
TILER: Extend and move SiTA div points
TILER: Clear PAT irq and status registers after refill
TILER: Fix rotated tiler address calculation.
TILER: Include slab header for kmalloc/kfree calls
TILER: Set correct file permissions
TILER: Fix klocwork defects in tiler_reservex() and tiler_exit()
TILER: Fixed issue with tiler_alloc_packed for 16/32-bit buffers.
TILER: Enable media support
OMAP4: omap-4430board.c: Erasing re-definition
TILER: Relocate entries to the media Kconfig file
TILER: Added reference counting and cleanup. Fixed query bugs.
TILER: Cleaned up SiTA container manager algorithm code
TILER: Added support for auto-packing of tiler blocks.
TILER: Renamed dmm_mem.c to tmm_pat.c to reflect what it is.
TILER: Added support for multiple containers and PAT instances.
TILER: Renamed SiTA tcm files to *tcm_sita*
TILER: Separated SiTA TCM implementation from TCM definition
TILER: Consolidated PAT programming
TILER: Use TCM features for tiler space allocations.
TILER: Update to Linux sizeof conventions and formatting.
TILER: Initial TCM code cleanup
TILER: Initial reorganization of TCM files.
Fixed Bugs, Added memset to sita_pvt in sita_init, updated utils to copy new fields in insert_element
Fixed bugs in sita_init
Moved to New Tiler APIs defined in tcm.h, add multi-continer support Signed-off-by: R Ramachandra <r.ramachandra at ti.com>
Export latest dmm header to mach directory Signed-off-by: David Sin <davidsin at ti.com>
Renamed files with shorter names
free buf info struct if copy_to/copy_from check fails
add NULL checks before returning from dmm_get_page(s) function
TILER: Corrected parameter checking in tiler_alloc_packed_nv12.
new APIs to optimize the freeing of used dmm pages
don't dereference sysptr in tiler_alloc_packed function
correct rot/pack API mismatches; add missing API prototypes
create separate module for tiler area manager (tam)
enable find buffer logic with new algo
tiler driver support for new tiler container algo
add dmm/tiler headers to omap include dir
move error code enums into 2d alloc header
remove unused dmm function declarations
Relocate TILER macro def
Remove unused dmm status and error structures
enable query block
add d2c logic to tiler drv; rework dmm pat refill function
add support to map existing user buffer into tiler
add rotation, packing, and map 1d code
replace page stack logic with new one using kernel lists
additional code corrections to pass next series of mem mgr tests
enable tiler_alloc, mmap, and tiler_free to pass initial tests
add logic to setup PAT and TILER orientation
basic tiler driver
re-format function spacing
replace types with kernel macros
basic dmm driver
Merge branch 'Wlan-next' of git://dev.omapzoom.org/pub/scm/pradeep/wlan-1283 into L24x7
OMAP4: board-4430sdp.c: Adding WLAN configuration
This modification is required when we build Wlan with supplicant
OMAP4: sdio: add TI 128x vendor + device id's
OMAP4: sdio: added structure embedded_sdio_data
mmc: host: wl1283: Support for MMC5 controller TI WLAN
OMAP4: mmc: core: wl1283: add embedded sdio card quirks
sdio: support for WLAN class and sans patch for embedded SDIO
OMAP4: sdio: WLAN-1283 configuration
OMAP4: sdio: WLAN-device registration/reset, Makefile entry
OMAP4: Kconfig modifications for 1283
omap: hsmmc funtionality breaks when CONFIG_PM not define
OMAP4: omap_4430sdp_defconfig: Aligning .config and defconfig
PATCH omap: hsmmc funtionality breaks when CONFIG_PM not define
Merge branch 'omap4_next' of git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into L24x7
Merge branch 'audio-for-24.7' of git://dev.omapzoom.org/pub/scm/misael/kernel-audio into L24x7
OMAP4: omap_4430sdp_defconfig: Fix to avoid overrite of definitions
ASoC: HDMI: Use ASoC framework to set dma_data
ASoC: ABE-TWL6040: Set default volumes to minimum
Merge branch 'display-next' of git://dev.omapzoom.org/pub/scm/axelcx/kernel-display into L24x7
Fix warnings in omap_wb.c
V4L2: Add source files for WB capture device
DSS2: Fixes in DSS2 files for correct writeback functionality
OMAP4: Add wb device in devices.c
V4L2: Writeback changes for omap_vout.c and omap_voutdef.h
V4L2 : Add writeback related structures in Videodev2.h
OMAP4: board_4430sdp: Naming properly &sdp4430_dss_device
OMAP: serial: Disable serial 8250 suspend/resume
OMAP: hwmod: if IDLEST fields are not set, use module defaults
Enabling PicoDLP in OMAP4 defconfig
Enabling DSS in OMAP4 defconfig
Implementing DSS context save restore
Use pgprot_dmacoherent API in OMAPFB
Remove compiler warning from Writeback related patches
Remove compiler warning from pico DLP related patches
Remove compiler warning from Board4430 file
Remove compiler warning from HDMI related patches
OMAP4: Adding MMC3/4/5 controller's support
OMAP4:HSMMC:Enabling power saving
HSMMC: Updating hwmod clock enable and idle calls
OMAP3: HSMMC : Correcting the name in hwmod
OMAP4: FIX HSMMC Controller base
OMAP3_OMAP4:HSMMC:Updating the attribute flags with capabilities
OMAP2/3 MMC: initial conversion to runtime PM
OMAP: MMC (core): split device registration by OMAP
MMC: OMAP HS-MMC: convert to dev_pm_ops
OMAP2/3: hwmod: Add basic HSMMC hardware modules
Revert "OMAP: PM: use omap_device API for suspend/resume"
Merge branch 'omap4_next' of git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into L24x7
Merge branch 'btfm_next' of git://dev.omapzoom.org/pub/scm/raja/L24x-btfm into L24x7
DSS2: Disable lcd_en to in case of framedone timeout
DSS2 Adds HDMI,DSI1,DSI2,DPI2 in wait_for_vsync
DISPC Merge Fix Missing if OMAP3 checks
FB: Add tiler support
FB Temp Not to call update
omap4: fb: Adds missing display update call when panning
MM: Add support for ioremapping multiple strided areas
V4L2: Temporarily write the correct value of global_alpha
DSS2: Support RGB32 format for video1 pipeline on OMAP4
DSS2: printks replaced with DSSDBG in dispc.c
V4L2: picoDLP changes for omap_vout_isr
V4L2: hdmi changes for omap_vout_isr
V4L2: Merge Fix change MAX_OVERLAYS and vout to overlay assignment for OMAP4
OMAP4: configure devices.c to create extra vout object for OMAP4
DSS2 : Remove Taal suspend resume functionality
DSS2 Merge Fix omap4 supported modes to overlays
OMAP: hwmod: remove unnessesary noice in omap_device and omap_hwmod
OMAP: i2c: Add runtime api support in i2c driver
OMAP: omap_device: add flag to disable automatic bus-level suspend/resume
OMAP: PM: use omap_device API for suspend/resume
OMAP: PM: initial runtime PM core support
platform_bus: allow custom extensions to system PM methods
Fix board changes for BH1780 and TMP105
OMAP4: PM: Reset Register bits correction
ASoC: ABE: Add shutdown function for tones
ASoC: SDP4430: Add Aux/FM input pins
ASoC: ABE-TWL6040: Add analog FM support
OMAP4: omap_4430sdp_defconfig: Fix overrite of MEDIA_SUPPORT
Merge branch 'audio-for-24.7' of git://dev.omapzoom.org/pub/scm/misael/kernel-audio into L24x7
OMAP4: syslink_file_permissions: Changing file permissions to 644
OMAP4: omap_4430sdp_defconfig: Fix to avoid overrite SPI configurations
Merge branch 'syslink-v2.6.34-rc6_24_7' of git://dev.omapzoom.org/pub/scm/tisyslink/kernel-syslink into L24x7
OMAP4: proximity_driver: File permissions
ARM: OMAP4: Enable BCI, GPADC in omap_4430sdp_defconfig
add support for BQ24156 AC charger driver
add support for RT GPADC conversion
add support for backup battery
POWER: TWL6030: Battery charger driver
MFD: TWL6030: Add Support for GPADC
omap4: mmc: Fix the regulator resource for MMC2
Board changes for temperature sensor
Revert "Board changes for temperature sensor"
MAP4:defconfig: Enable Bluetooth and dependent components
serial: TTY: Adding new ldisc for TI BT/FM/GPS chips
drivers: misc: Adding FM driver common header
drivers: misc: Adding FM driver Char module sources
drivers: misc: Adding FM driver v4l2 i/f module sources
drivers: misc: Adding FM driver Mixer interface sources
drivers: misc: Adding FM driver core sources
drivers: misc: Adding FM driver ST interface module
drivers: misc: Adding ST based BT driver sources
drivers: misc: Adding ST-FM header file source
drivers: misc: Adding ST header file sources
drivers: misc: Adding ST HCI LL PM protocol sources
drivers: misc: Adding ST Core sources
drivers: misc: Adding ST init manager sources
drivers: misc: Kconfig, Makefile change for ST
OMAP4: 4430SDP: Adding wl128x platform device.
Writeback pipeline support in OMAP4 DSS
OMAP4 : HDMI specific sysfs control to support Hot plug detect
OMAP4:HDMI Library changes to support hot plug detect
OMAP4 : HDMI driver changes to support Hot Plug Detect
Overlay check for TV when switching as TV in OMAP4 doesnt support Downscaling
Modify pico to add suspend and resume support also modify enable and disable
DSS changes for pico DLP
pico_DLP changes in display.h
Makefile and kconfig changes to include pico_DLP
Board-4430sdp.c file change to include Pico DLP panel
DPI changes to include the channel to accommodate LCD2
Add Pico DLP panel to OMAP4
HDMI 9/9 Library to enable the HDMI hardware in OMAP4
HDMI 8/9 EDID related sysfs controls
HDMI 7/9 Makefile change to include hdmi_lib.c build
HDMI 6/9 Makefile and kconfig change
HDMI 5/9 Add HDMI support in dss2
HDMI 4/9 Add HDMI related dss funtion
HDMI 3/9 Modify display.h to include hdmi
HDMI 2/9 Modify board file to add support for HDMI
HDMI 1/9 Add HDMI driver in OMAP4 DSS
DSI:Merge FIX-set default update mode as auto_updtae
V4L2: Merge FIX-Replace virtaddr with phyaddr in omap_vout_mmap
DSI:Merge FIX- set DSI DDRCLKALWAYSON and COMPLEXIO GO bit
usb: musb: Dynamic dma channel allocation in gadget driver
usb: musb: Unmapping the dma buffer when switching to PIO mode
omap4: Enable KEYPAD in pm-defconfig
omap4: pm: Add omap4_pm_defconfig
omap4: Enable 'Unix domain sockets' support in OMAP4430 defconfig
OMAP4: Keyboard: Linux Input Sync Up
OMAP4: hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set
Defconfig changes for tmp105
Board changes for temperature sensor
Add support for TMP105
ASoC:ABE: Remove sample rate converter
ASoC: ABE-TWL6040: Reduce ditigal gains
ASoC: SDP4430: Remove build warnings.
ASoC: TWL6040: Jack detection in codec
ASoC: SDP4430: Add jack detection for machine driver
ASoC: ABE: Enable MM_UL2 instead of MM_UL port
ASoC: ABE: Initialize abe mixers
ASoC: ABE: High pass filter for handsfree
ASoC: ABE-TWL6040: Remove build warnings from codec
ASoC: ABE: Add voice call test configuration
ASoC: McBSP: Add Support for McBSP interfaces in OMAP4
OMAP4: McPDM: Remove build warnings on McPDM driver
ASoC: ABE: Support for mono playback
OMAP4: ABE: Add PM support for ABE module
ASoC: ABE: Remove build warnings
ASoC: OMAP4: Move trigger handling to ABE
ASoC: ABE-TWL6040: Correct widget handling for drivers
ASoC: ABE-TWL6040: Initial mixer configuration
ARM: OMAP4: Enable HDMI audio by default in defconfig
ASoC: HDMI: Change wrapper function names
ARM: OMAP4: Enable audio ALSA support for sdp4430
ASoC: ABE-TWL6040: Add ABE digital mixers in DL path
ASOC: OMAP4: Fix Audio DMA transaction Error
ASoC: ABE-TWL6040: Enable aess_clk only when needed.
ASoC: HDMI: Map HDMI module audio functions to HDMI dai
ASoC: OMAP4: HDMI Audio driver fix for Stereo
ASoC: SDP4430: Add HDMI dai to machine driver
ASoC: OMAP4: HDMI: Add support for HDMI interface
ASoC: OMAP4: Fixes for fullduplex test
ASoC: OMAP4: Avoid multiple McPDM interface requests
ASoC: ABE-TWL6040: Explicitly enable aess_clks
ASoC: OMAP4: Add ABE DAI driver
ASoC: ABE-TWL6040: Adding ABE dais
ASoC: ABE-TWL6040: Moving twl6040.c to abe-twl6040.c
ASoC: ABE: Fixes for hal 6.22
ASoC: ABE: Use ioremap to get ABE virtual address
ASoC: ABE: Add audio HAL06.22
ASoC: ABE: Add coefficients files for audio backend v6.22
ASoC: SDP4430: Set sysclk at init
ASoC: OMAP4: Buffer size should be a multiple of 24
ARM: OMAP4: TWL6040 codec platform data
ARM: OMAP4: Add PM support for McPDM driver
ASoC: McPDM: Add macro OMAP_MCPDM
ARM: OMAP4: Register driver when OMAP_MCPDM is selected
ASoC: TWL6040: Fix playback with 19.2 Mhz MCLK
ASoC: sdp4430 - add sdp4430 pcm ops to DAI.
ASoC: TWL6040: Enable earphone path in codec
ASoC: SDP4430: Add support for Earphone speaker
ASoC: SDP4430: Add sdp4430 machine driver
ARM: McBSP: Add support for omap4 in McBSP driver
ARM: McBSP: Fix request for irq in OMAP4
OMAP: McBSP: Add 32-bit mode support
ASoC: TWL6040: use of kzalloc/kfree requires the include of slab.h
ASoC: Fix file permission of soc/codecs/twl6040.c
ASoC: TWL6040: Change twl macro
ASoC: TWL6040: Add twl6040 codec driver
OMAP4: PMIC: Rename twl6030_codec as twl6040_codec
ASoC: McPDM: Change pdm functional clock name
ASoC: McPDM: Use tabs for indentation in header
ASoC: McPDM: Use tabs for indentation
SYSLINK:IPC-rename heap functions to avoid name collision
Revert "ARM: Defer the L_PTE_EXEC flag setting to update_mmu_cache() on SMP"
OMAP4: hwmod: Add offset to DMA requests line number
OMAP: Remove temporay hack to avoid disabling clock.
Serial: Enable clocks back if disbaled during init.
DISPC uv_scaling changes in plane_info functions
DISPC scale coef 5-3taps
DISPC Add FIR configuration
SYSLINK IPC Message transport add protection to transport functions
SYSLINK IPC messageq transport check the listmp handle
SYSLINK:PROCMGR: Put SYS_M3 in reset before MMU unmap
SYSLINK: Make Syslink Loadable Modules Makefiles
SYSLINK: IPC - Make Syslink Loadable Modules
V4L2 Temp Not to call Update
V4L2 crop support with streaming
V4L2 Multi Display Support in ISR
V4L2 Add Tiler Support voutdef.h
V4L2 Add Tiler Support in vout.c
V4L2 Add Tiler Rotation enum
V4L2 Exclude VRFB for OMAP4
OMAP4 V4L2: Make VRFB depend on OMAP2,3
OMAP3: HWMOD: GPTIMER corrections
Vaibhav V4L2 patches
DSS2 Tiler Support
DSS2 NV12 support in dispc.c
DSS2 NV12,RGB color mode display.h
DSS2 NV12 changes in manager.c
DSS: Change PLL calls in dpi.c brought by introducing DSI2
DSS: Modify core.c to intialize DSI2
DSS2: Change fake_vysnc_irq to generate VSYNC2 for DSI2
OMAP4: Add board information for secondary lcd
DSS: modify select_clock_source functions for enabling DSI2 clocks
DSS: Panel-Taal: Add enum changes to enable secondary lcd
DSI: Incorporate changes to enable DSI2 in dsi.c
DSI: Introduce new enum to differentiate between DSI1 and DSI2
OMAP4 DSS2 Add Zorder support
DSS2:Merge FIX-<fix function calls to dispc_set_clock_div in interface drivers>
DSS2:Merge FIX-<Remove extra return statement in display.c>
DSS2:Merge FIX-<Correct dss_recheck_connections in overlay.c>
DSS2:Merge FIX-<Wait for VSYNC2 when channel is lcd2 in manager.c>
DSS2:Merge FIX-<change function declarations in dss.h and display.h>
DSS2:Merge FIX-<Write to correct registers based on DSS_CHANNEL in dispc.c>
SYSLINK:IPU-PM: add i2c support
SYSLINK:IPU-PM: functions prototypes for ipu_pm
SYSLINK:IPU-PM: Definitions of ipu_pm functions
SYSLINK:IPU-PM: changes to match ipu_pm new code
SYSLINK:IPU-PM: enabling by default ipu_pm
SYSLINK:IPU-PM: build changes for ipu_pm support
Patch for creating more than one FB
OMAP4: merge fix board file
Update defconfig for BH1780 Ambient Light driver
Update board file for BH1780
misc: ROHM BH1780GLI Ambient light sensor Driver
omap4: Disable the 8250 serial driver in defconfig
omap-Serial: Enable omap-serial driver by default
ARM: Defer the L_PTE_EXEC flag setting to update_mmu_cache() on SMP
OMAP4: Add support for Overlay Manager 3 in DSS2
OMAP4: Enable VIDEO 3 pipeline functionality in DSS2.
OMAP4 video 3 pipeline register definitions for enabling VIDEO 3 pipeline in DSS2.
OMAP4: changes in display.h for enabling VIDEO 3 pipeline in DSS2.
DSS2 : Changes for auto-update mode for panel-taal on OMAP4
DSS2 : Panel-taal config changes for OMAP4
OMAP4430SDP : clock changes for DSI PLL on OMAP4
OMAP4430SDP : Backlight changes for primary lcd on OMAP4
DSS2 : IRQ handler for DSI on OMAP4
DSS2 : OMAP4 cnfiguration changes for dsi
DSI Regulator for omap3 DSI
DSI Add DSI for OMAP4
OMAP4 dispc merge bit change DISPC bit for OMAP4 is corrected
OMAP4 dss base address Changes the dss base address for OMAP4
OMAP4 dispc base address Changes the dispc base address for OMAP4
OMAP4 dsi base address Changes the dsi base address for OMAP4
DSS2-TEMP-no clk API calls
OMAP4 irq for DSS OMAP4 does not handle irqs at DSS level, instead seperate lines for dispc
DSS2-TEMP-no clk for OMAP4
OMAP4 add taalpanel support
DSS2 VRFB depends on OMAP2,3
DSS2 OMAP4 support
OMAP3630: DSS2: Updating MAX divider value
OMAP: DSS2: Add ACX565AKM Panel Driver
OMAP: DSS2: TPO-TD03MTEA1: fix Kconfig dependency
OMAP: LCD LS037V7DW01: Add Backlight driver support
OMAP: DSS2: Taal: Fix DSI bus locking problem
OMAP: DSS2: Taal: add mutex to protect panel data
OMAP: DSS2: Make partial update width even
OMAP: DSS2: Fix device disable when driver is not loaded
OMAP: DSS2: VENC: don't call platform_enable/disable() twice
OMAP: DSS2: check lock_fb_info() return value
OMAP: DSS2: fix lock_fb_info() and omapfb_lock() locking order
OMAP: DSS2: Use vdds_sdi regulator supply in SDI
OMAP: DSS2: Remove redundant enable/disable calls from SDI
OMAP: DSS2: Add Kconfig option for DPI display type
Update defconfig for CMA3000 Accelerometer driver
Platform changes for CMA3000 Accelerometer driver
input: CMA3000 Accelerometer Driver
Revert "CMA3000 Accelerometer Driver"
Revert "Correct permission mode for new files"
SYSLINK:iommu-disable twl
omap: iommu-add functionality to get TLB miss interrupt
omap: iommu-update irq mask to be specific about twl and tlb
TILER: Fix rotated tiler address calculation.
TILER: Include slab header for kmalloc/kfree calls
TILER: Set correct file permissions
TILER: Fix klocwork defects in tiler_reservex() and tiler_exit()
TILER: Fixed issue with tiler_alloc_packed for 16/32-bit buffers.
TILER: Enable media support
TILER: Relocate entries to the media Kconfig file
TILER: Added reference counting and cleanup. Fixed query bugs.
TILER: Cleaned up SiTA container manager algorithm code
TILER: Added support for auto-packing of tiler blocks.
TILER: Renamed dmm_mem.c to tmm_pat.c to reflect what it is.
TILER: Added support for multiple containers and PAT instances.
TILER: Renamed SiTA tcm files to *tcm_sita*
TILER: Separated SiTA TCM implementation from TCM definition
TILER: Consolidated PAT programming
TILER: Use TCM features for tiler space allocations.
TILER: Update to Linux sizeof conventions and formatting.
TILER: Initial TCM code cleanup
TILER: Initial reorganization of TCM files.
Fixed Bugs, Added memset to sita_pvt in sita_init, updated utils to copy new fields in insert_element
Fixed bugs in sita_init
Moved to New Tiler APIs defined in tcm.h, add multi-continer support Signed-off-by: R Ramachandra <r.ramachandra at ti.com>
Export latest dmm header to mach directory Signed-off-by: David Sin <davidsin at ti.com>
Renamed files with shorter names
free buf info struct if copy_to/copy_from check fails
add NULL checks before returning from dmm_get_page(s) function
TILER: Corrected parameter checking in tiler_alloc_packed_nv12.
new APIs to optimize the freeing of used dmm pages
don't dereference sysptr in tiler_alloc_packed function
correct rot/pack API mismatches; add missing API prototypes
create separate module for tiler area manager (tam)
enable find buffer logic with new algo
tiler driver support for new tiler container algo
add dmm/tiler headers to omap include dir
move error code enums into 2d alloc header
remove unused dmm function declarations
Relocate TILER macro def
Remove unused dmm status and error structures
enable query block
add d2c logic to tiler drv; rework dmm pat refill function
add support to map existing user buffer into tiler
add rotation, packing, and map 1d code
replace page stack logic with new one using kernel lists
additional code corrections to pass next series of mem mgr tests
enable tiler_alloc, mmap, and tiler_free to pass initial tests
add logic to setup PAT and TILER orientation
basic tiler driver
re-format function spacing
replace types with kernel macros
basic dmm driver
OMAP4: Hack for not disabling the clocks
OMAP4: Correcting the gp timer clock info in the hwmod data base.
OMAP: Convert dual mode timer into a platform driver.
OMAP1: Dual mode timer device registration.
OMAP2/3/4 : Dual mode timer device registration.
OMAP3: Add hwmod data for OMAP3 dual mode timers
Fix board data to support device only, host only and OTG roles.
Fix TWL6030 module name in MUSB driver.
SYSLINK: mailbox - comment out mailbox clocks for OMAP4
omap: iommu- update ducati mmu irq define name
SYSLINK: kernel 2.6.34 migration changes
omap: mailbox: convert block api to kfifo
omap iommu: introduce iteration macro for iotlb entry scan
OMAP:iommu- add TLB preservation support
OMAP:iommu - missing check for TLB valid entry
OMAP:iommu support for OMAP4
OMAP:iommu renamed omap3-iommu to omap-iommu
SYSLINK: ListMP KW fix for release 24.6
SYSLINK: Proc4430 module KW defect fixed for release 24.6
SYSLINK:proc-remove annoying printk
SYSLINK:IPU-PM: add definitions for IPU-PM functions
SYSLINK:IPU-PM: add prototypes for IPU-PM functions
SYSLINK:IPU-PM: add notifications function call
SYSLINK:IPU-PM: register the IPU PM events
SYSLINK:IPU-PM: Add IPU PM code to kernel via Menuconfig
SYSLINK remove the mutex protection while sending the mailbox messages
omap: mailbox: rwlocks to spinlock: compilation fix
omap: mailbox: convert block api to kfifo
omap: mailbox: fix reverse likeliness
omap: mailbox cleanup: split MODULE_AUTHOR line
omap: mailbox cleanup: convert rwlocks to spinlock
SYSLINK: proc-config option to load base image
SYSLINK: notify-payload getting manipulated in notify isr
SYSLINK: ipc - messageq transport remove waiting for Ducati to clear the flag
SYSLINK: auto select mailbox framework when notify is selected
Revert "ARM: dma-mapping: remove dmac_clean_range and dmac_inv_range"
ARM: UNOFFICIAL_USER_DMA_API
syslink: better handling for interrupted system calls
SYSLINK: notify - remove notify_dispatcher from build
SYSLINK: remove unused code
SYSLINK: remove tesla related file
SYSLINK: ipc - remove execute permission on syslink header files
Syslink: Fix the page attributes set in mmpa for ARMv7 architectures
SYSLINK:notify-remove redunant check in notify send event
omap: mailbox: mbox_tx work done directly
SYSLINK: ipc - fixes for critical nameserver bugs
SYSLINK: ipc - gatepeterson_open handles error cases properly
SYSLINK: procmgr - remove compile warnings in ducatienabler
SYSLINK: procmgr - remove module section mismatch warning
SYSLINK: ipc - reference count for shared regions
SYSLINK: 2.6.33 migration - remove duplicate page_to_phys definition
SYSLINK: 2.6.33 migration - adjust for include files move to plat
SYSLINK: 2.6.33 migration - adjust for location of autoconf.h
OMAP4:Mailbox-retries in case of FIFO full
SYSLINK: fix error with handling of return code in case of interrupted system call
SYSLINK: Stabilize IPC for multithreaded applications
SYSLINK: ipc - call notify send event with true sycn flag
Syslink: Enable Syslink modules as default built
SysLink Notify kernel KW-fixes
SYSLINK: ipc - kw defect fixes #2
SYSLINK: procmgr - kw defect fixes
SYSLINK: notify - kw defect fixes
SYSLINK: sysmgr - kw defect fixes
SYSLINK: ipc - kw defect fixes
SYSLINK:IPC don't use down_timeout to wait forever
SYSLINK: ipc - sysmgr acknowledges handshakes
SYSLINK: enable MMU fault notification in Ducati
SYSLINK: proc4430 - ensure correct ducati reset sequence
SYSLINK: procmgr - format the MMU dump properly.
SYSLINK:proc-add VM_RESERVED flag to prevent swapping
SYSLINK: sysmgr - adjust ducati memory map for 512MB
SYSLINK: procmgr - adjust ducati memory map for 512MB
enable mailbox framework
SYSLINK:proc-use OMAP2_L4_IO_ADDRESS instead of IO_ADDRESS
SYSLINK PROCMGR Fix to support multiple load/run of ducati samples
SYSLINK: sysmgr - ioctl call to stopcallback sets return status
SYSLINK: procmgr - Removed extra ducati_destroy call from proc4430_destroy
SYSLINK:proc-fix in ducati enabler hw mmu module
SYSLINK: ipc - conditional check added before printing some traces
SYSLINK: sysmgr - changes to update to new memory map
SYSLINK: Ducati fix for 16MB TLB updated
SYSLINK: procmgr - adjust memory map for SDC
SYSLINK:ipc-de-couple sysmanager from Proc module
SYSLINK NOTIFY Patch to fix premature read ioctl exit, iounmap related memory leak.
SYSLINK NOTIFY Patch to cleanup notify_ducati module
SYSLINK:proc-changes to proc start and stop
revert back to hw_mmu to test TLB entry changes in mmu
SYSLINK: ipc - platform cleanup loads config info
SYSLINK:ipc:notify drv read fix
SYSLINK:ipc-fix compile warning in platform_destroy
SYSLINK: procmgr - Converted the procmgr driver module to platform driver model.
SYSLINK: ipc - fixes/ additions in ducatienabler and notify_ducati driver.
SYSLINK: ipc - fix in notify_dispatcher.
SYSLINK: ipc - fix in platform_mem.
SYSLINK: ipc - fixes in proc4430 and platform.
SYSLINK: ipc - heapbuf_close frees obj
SYSLINK: notify - ducatidrv frees event listener
SYSLINK: ipc - cleanup for platform_mem
SYSLINK: proc4430 - Reserve memory alignment
SYSLINK: ipc - Enable SWDMM memory region in SysMgr
SYSLINK: ipc - Fixed cleanup order of operations
SYSLINK: sysmgr - Updated error message strings
Syslink-Fixed platform heapbuf cleanup order
SYSLINK: PROCMGR - Patch to move to syslink version 2.0.0.12
SYSLINK NOTIFY Patch to migrate Notify module to Syslink version 2.0.0.12
SYSLINK: ipc - bug fixes incorporated from SysLink 2.00.00.12
SYSLINK:proc-add virt to phys and map tiler functionality
SYSLINK IPC Patch to accomodate the use of multiple heaps
SYSLINK: ipc - removed gt_traces in remaining IPC modules
SYSLINK: ipc - removed gt_traces from messageq modules
SYSLINK: ipc - removed gt_traces from listmp modules
SYSLINK: ipc - removed gt_traces from messageq_transportshm & heapbuf modules
SYSLINK IPC-SYSMGR Patch to cleanup modules in the platform_destroy() function.
SYSLINK: ipc - minor fix in heapbuf
SYSINK:IPC-make sysmanager option default
SYSLINK: ipc - fixes in messageq and nameserver_remotenotify
add UART mapping to ducati
SYSLINK NOTIFY DUCATI Patch to fix notifyshm driver open call.
SYSLINK platform attach proc handles
Subject: SYSLINK SysMgr setup for AppM3
SYSLINK Procmgr add proc id param for Proc stop.
SYSLINK:notify-fix the notify setup bug
SYSLINK:notify-fix checkpatch warnings
SYSLINK:notify-move the mailbox init to setup
SYSLINK:ipc-fixes to sys manager
SYSINK:ipc-add sys manager config option
Subject: SYSLINK fixes for shutdown stage
SYSLINK:ipc-sys manager structure fixes
SYSLINK:sys manager changes and bug fixes
SYSLINK: ipc - sharedregion fixes for sysmgr validation
SYSLINK: ipc - fix messageq create and delete
SYSLINK: ipc - Add SysMgr & SysMemMgr
SYSLINK: ipc - fix listmp_sharedmemory list initialization
SYSLINK: ipc - fix issues with nameserver_get functions
SYSLINK: ipc - fix heapbuf issues in open, create & delete
SYSLINK: procmgr - correct static physical memory address
SYSLINK:ipc-listmp sharedmemory delete procid check
SYSLINK:ipc-gatepeterson open shared address fix
MAILBOX select mailbox driver by default ver 2
Syslink IPC SharedRegion Fix
MAILBOX select mailbox driver by default
SYSLINK: ipc - decrement reference count properly.
SYSLINK NOTIFY MODULE Patch to fix the WARN_ON in notify_register()
SYSLINK Notify-Ducati Adds support to use open source mailbox changes.
SYSLINK NOTIFY DUCATI - Removes notify ducati module's dependency on Notify dispatcher in the Kconfig.
SYSLINK:ipc-fixes for sharedregion_get_table_info
SYSLINK DUCATI change the the proc control structure
Syslink IPC MultiProc Fix
SYSLINK Proc4430 added dependancy on IOMMU
SYSLINK: procmgr - relocated procmgr.h
SYSLINK Notify-Ducati Adds syslink specific atomic functions to check and set driver state.
SYSLINK Notify IPC migrations to include syslink specific atomic calls
SYSLINK Notify - Adds IPC migrations to the Notify driver module.
SYSLINK ProcMgr fix for Procmgr Start procid
SYSLINK:proc changes to adapt to sys manager and ipc
SYSLINK Ducati reduce the DMM pool size
SYSLINK Heapbuf aligned with IPC 50 and Syslink 2_00_00_08 changes
Syslink IPC ListMP, messageQ aligned with 2_00_00_08
Syslink IPC GatePeterson aligned with Syslink drop 2_00_00_06
ARM OMAP4 Syslink Utils Platform mem module
ARM OMAP4 Syslink IPC ListMP, ListMP SharedMem Changes
ARM OMAP4 Syslink IPC MessageQ, MessageQ Transport Changes
ARM OMAP4 Syslink IPC Shared Region Changes
ARM OMAP4 Syslink IPC NameServer,NameServer Notify Changes
ARM OMAP4 Syslink IPC Multiproc
ARM OMAP4 Syslink atomic function header
SYSLINK:proc-adapt proc module to iommu module
SYSLINK:proc-changed the procmgr ioctl base
SYSLINK:notify-fix ioctl issue with 2.6.31 kernel
fix ipc compile errors
SYSLINK Proc reduce the default DMM pool size
SYSLINK: ipc - remove a WARN_ON in sharedregion module
SYSLINK: ipc - nameserver_get returns properly for nameserver_get_local
SYSLINK: ipc - remove unnecessary printks
ARM OMAP4 Syslink IPC heapbuf destroy fix
SYSLINK proc remove unnecessary WARN_ON
SYSLINK: ipc - fixes in nameserver_remotenotify callback
ARM OMAP4 Syslink IPC gatepeterson, nameserver remote notify fix
SYSLINK: Reorganize Syslink Kconfig
SYSLINK:proc-print l4 info and fix tlb entries print
SYSLINK:proc-start and stop functionality
SYSLINK:proc-add l4entries and fix checkpatch warnings
Syslink: Notify - Patch uses Multiproc API in the Notify module.
SysLink : Notify - Patch to add udev support for ipcnotify and ducati notify modules.
Syslink: Notify Module This patch allows the notify module to be configured for SysM3 and AppM3
SYSLINK: ipc - fix the invalid comparision in sharedregion_add
ARM OMAP4 Syslink IPC MessageQ, Notify Fix
PROCMGR: updated with couple of changes for procmgr unmap Updated the ducatienabler.c file to get the procmgr Ummap function working. also updated the procmgr_drv.c file with a minor update
Syslink: Notify,various fixes on Notify driver to support notify functionality on the kernel/user side
SYSLINK: ipc - fix messageq bugs
Syslink: Patch to resolve issues in IPC components nameserver, nameserver notify and messageQ.
Syslink: Patch to resolve Notify shared memory configuration issue.
Syslink: Patch to resolve Notify structure padding issue.
Syslink: Patch to resolve multiple ISR invocation
SYSLINK: notify-remove white spaces
Patch to re-organize notify shm data structures
SYSLINK: ipc - heapbuf bug fixes
SYSLINK: ipc - replaced mutex with gatepeterson in listmp_sharedmemory
SYSLINK: ipc - remove extra member from listmp_params
SYSLINK: ipc - fix listmp_sharedmemory issues in heapbuf_open and heapbuf_create
SYSLINK: ipc - fix for listmp_sharedmemory_destroy
SYSLINK: ipc - bug fixes for listmp_sharedmemory_open and api_status
SYSLINK: ipc - minor fixes in sharedregion and gatepeterson driver
OMAP4 syslink ipc add notify dependancy in Kconfig
SYSLINK: ipc - minor bug fixes in listmp_sharedmemory module
OMAP4 syslink ducati header file format
OMAP4 syslink header file cleanup 2
OMAP4 Syslink header file cleanup
OMAP4 syslink dispatcher code format fix
OMAP4 Syslink Notify driver fix format
SYSLINK: ipc - fixed return status for gatepeterson_open
OMAP4 Syslink proc module code format fix
SYSLINK:proc-dmm fixes for user space buffers
SYSLINK: proc4430 - store physical address into user virtual address
SYSLINK:proc-fix the map attributes for DMM.
SYSLINK: ipc - exported multiproc functions
SYSLINK:proc-fixes to proc module
SYSLINK: procmgr - added copy_from_user for mem_entries
SYSLINK: ipc - fixed the setup api issues with messageq
OMAP4 Syslink ducati driver coding format fix
OMAP4 Syslink remove unused file
OMAP4 Syslink notify driver coding format fix
OMAP4 Syslink dispatcher code format fix
ARM OMAP Syslink proc manager open fix
SYSLINK:proc-added proc4430 attach and detach
SYSLINK:proc-fix the issue with mem entries
ARM OMAP Syslink IPC removal of multiple header inclusions
ARM: OMAP Syslink IPC ioctl module variable name changes
OMAP4 Syslink ducati driver checkpatch fix
OMAP4 syslink dispatcher checkpatch fixes
SYSLINK-Proc-fixes in proc4430 driver
ARM: OMAP Syslink IPC ioctl module fixes
OMAP4 Syslink use kernel bitops functions
OMAP4 Syslink remove unused file
OMAP4 Syslink mailbox header cleanup
OMAP4: Syslink dispatcher header files cleanup
OMAP4 syslink ducati header file format changes
SYSLINK: ipc - fixed api return status in messageq and listmo
SYSLINK: ipc - renamed omap_ipc to syslink_ipc
SYSLINK: ipc - removed OsalSemaphore
IPC SharedRegion module fixes
IPC GatePeterson module fixes
IPC HeapBuf module fixes
OMAP4 syslink remove unused files
Cleanup for ducati ioctl
PROCMGR - fix unregistering the module
Updated OMAP4 IRQ definitions in notify dispatcher
remove tesla driver from syslink
Chech patch fixes in ducati driver Chech patch fixes in ducati driver
syslink: corrected checkpatch warnings in ipc modules
syslink: messageq and multiproc synched to IPC-b33
proc4430_translate_addr implementation
procmgr: updated with a fix for a minor issue Updated with a fix for a minor issue with the procmgr_create the procmgr state table was not getting updated with the procmgr handle
IPC Added IOCTL I/F for NameServer Remote Notify modules This is to sync with the latest syslink drop(version 2.0)
IPC_Fix_Nameserver_And_Multiproc This includes the fixes in nameserver and multiproc modules during testing.
Fix a minor bug in proc module Fix a minor bug in proc module
notify disable fix notify disable fix
Fix issues with notify_disable/restore Fix issues with notify_disable/restore
fixed checkpatch warning in proc4430
ProcMgr: Resolved few bugs within the ioctl function. resolved few bugs observed within the ioctl function
updated dmm start and size information for DUCATI
plug dmm with proc module
removed bug on that is not needed
syslink: corrected the signature of the notify callback functions in ipc
SYSLINK: IPC support for OMAP4
OMAP3: hwmod: add omap_hwmods for UART1,2,3
Serial: Update UART HWMOD layer.
OMAP: UART: omap_device converions, remove implicit 8520 assumptions
serial: Add OMAP high-speed UART driver
Proximity: Board changes for the proximity sensor
SFH7741 defconfig changes
SFH7741 : Proximity switch changes
OMAP4: GPIO: Add gpio dev_attr to hwmod struct
RTC: TWL6030: Don't use i2c burst read for OMAP4
OMAP: i2c: Fix max number of controllers
OMAP4 HSMMC: Adding Card detect support for MMC1
OMAP HSMMC: Adding flag to determine Card detect type
OMAP4 HSMMC: Enable HSMMC support
OMAP4 HSMMC: Adding PBIAS Configuration for MMC1 controller
OMAP4 HSMMC: Adding hsmmc support to board file
OMAP4 HSMMC: Adding dummy interface clocks for HSMMC
Fix omap3_defconfig build error
ARMv7: Fix typo in commit 8f4d29bc
OMAP3: I2C: Convert i2c driver to use omap_device/omap_hwmod
OMAP: I2C: split device registration; convert OMAP2+ to omap_device
OMAP3: hwmod: add I2C hwmods for OMAP3430
OMAP: GPIO: Fix OMAP4 GPIO reg access issues
OMAP: GPIO: Remove omap_gpio_init()
OMAP: GPIO: Implement GPIO as a platform device
OMAP: GPIO: Introduce support for OMAP2PLUS chip GPIO init
OMAP: GPIO: add GPIO hwmods structures for OMAP243X
OMAP: GPIO: add GPIO hwmods structures for OMAP242X
OMAP: GPIO: add GPIO hwmods structures for OMAP3
OMAP: GPIO: Introduce support for OMAP7xx chip GPIO init
OMAP: GPIO: Introduce support for OMAP16xx chip GPIO init
OMAP: GPIO: Introduce support for OMAP15xx chip GPIO init
OMAP: GPIO: Include platform_data structure for GPIO
OMAP: GPIO: Modify init() in preparation for platform device implementation
omap4: Fix multi-omap boot with reset un-used clocks
ARMv7: Use the Inner Shareable I-cache on MP
MCBSP: Fix the read and the write calls
Remove the following warning
MCBSP: Frame sync fix
MCBSP DMA support patch
MCSPI: ditectory change
Board support changes for spi test
McSPI slave support
USB: MUSB: Fix enumeration when device connected at boot up.
USB: MUSB: Add phoenix initialization under OMAP4.
USB : MUSB : Phoenix settings for Host mode
USB : MUSB : Phoenix settings for USB device mode
This patch adds CONFIG_ARCH_OMAP4 macro within MUSB driver.
This patch updates the Makefile to build the MUSB driver for OMAP4. It also sets the Kconfig options for OMAP4.
Program the OTG_INTERFSEL register based on transcevier type passed from board file.
Remove hack to disable MUSB from board file
Revert "USB: MUSB: Set transceiver interface type" Take the USB patches in Greg's queue. This reverts commit 3f78c9561bcc429483ed0e4580a2bdef4bdfb981.
Revert "USB: MUSB: Enable MUSB for OMAP4 in Kconfig" Take the USB patches in Greg's queue. This reverts commit 9820ae36962e2ea963e6531b8bf718c6c47831b0.
Revert "USB: MUSB: Add OMAP4 support in MUSB driver" Take the USB patches in Greg's queue. This reverts commit 14191d218e04d35c85e41d24a476e6bb545cbfbf.
Revert "USB : MUSB : Phoenix settings for USB device mode" Rebase as per patches in Greg's queue. This reverts commit c2e4bc7b9ea58592edecd0f0956c684e6a854eb4.
Revert "USB : MUSB : Phoenix settings for Host mode" Rebase as per patches in Greg's queue. This reverts commit 0d1bed47a9bef6ee35d573762f2b0e640e555fc8.
Revert "USB: MUSB: Add phoenix initialization under OMAP4." Rebase as per patches in Greg's queue. This reverts commit cc32231c8cb88a867ed2dd988c693448a0723146.
Revert "USB: MUSB: Fix enumeration when device connected at boot up." Rebase as per patches in Greg's queue. This reverts commit 1fee74df577a2582a20f81617174ca66d3b9ad8d.
Revert "omap3: fix build break when building for 3430" Not needed with USB patches from Greg's queue This reverts commit 05c5a515661c59574f9f9311c229f7cc904d5997.
OMAP4: Defconfig: Enable Touchscreen
OMAP4: Touchscreen: Board Support
OMAP4: Touchscreen: Header File Dependency
OMAP4: Touchscreen: Controller Identification
OMAP4: Touchscreen: Initial Driver Support
OMAP4: Keyboard kernel configuration
OMAP4: Keyboard board support
OMAP4: Keyboard controller support
Input: matrix_keypad: Device driver interfaces
OMAP4: Ethernet: GPIO Handling
Revert "ARM: Defer the L_PTE_EXEC flag setting to update_mmu_cache() on SMP"
OMAP4: PM: Fix prm/cm accessor api's for register access
twl6030: regulator: Remove vsel tables and use formula for calculation
omap3: fix build break when building for 3430
Revert "ARM : OMAP4 : Add USB support to 4430 SDP board file"
sDMA: descriptor autoloading feature
Revert "sDMA: Descriptor autoloading feature"
OMAP: clocks: DEFAULT_RATE flag missing in rate structs
OMAP4: PRCM: Enable DPLL autoidle and autogating for post dividers
OMAP4: suspend: Basic system suspend supporting wfi
OMAP4: net: Add suspend/resume hooks
OMAP4: CPUidle: Basic CPUidle support for OMAP4
ARM: Add cpu_idle_wait() support for ARM architecture
omap4: hotplug: Basic CPU HOTPLUG support
omap4: Add smc API to read AuxCoreBoot0 register
OMAP4: PRCM: Add offset defines for all PRM registers
OMAP4: PRCM: Add offset defines for all CM registers
OMAP4: PRCM: Remove duplicate definition of base
OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention
OMAP4: CM: Remove non-functional registers in ES1.0
OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains
OMAP4 clockdomain: Fix omap2_clkdm_clk_enable/disable api for 44xx
OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains
OMAP: timers: Fix clock source names for OMAP4
OMAP4 clock: Support clk_set_parent
OMAP: hwmod: Temp fixes to get hwmod registers work
OMAP4: hwmod: Add remaining hwmod support for
OMAP: hwmod: Temporary disable dependency
OMAP4: hwmod: Enable omap_device build for OMAP4
OMAP4: hwmod: Enable omap_hwmod build for OMAP4
OMAP4: hwmod: Add partial hwmod support for
OMAP: HWMOD: Replace WARN by pr_warning for clockdomain check
OMAP: HWMOD: Rename OMAP hwmod name for the MPU
OMAP: HWMOD: Do not exit the iteration if one clock init failed
OMAP: HWMOD: Replace WARN by pr_warning after clock lookup
OMAP: HWMOD: Remove IS_ERR check with omap_clk_get_by_name return value
OMAP: HWMOD: Fix wrong pointer iteration in oh->slaves
OMAP4: HWMOD: Replace OCPIF_HAS_IDLEST by HWMOD_NO_IDLEST
OMAP4: HWMOD & CM: Implement the omap4_cm_wait_module_ready function
OMAP: CM: Move MAX_MODULE_READY_TIME to cm.h
OMAP4: HWMOD: Replace module & device offsets by absolute clkctrl address
ARM: Enable userpsace THUMB options
omap4: errata: axi2ocp errata work-around for ES1.0
Correct permission mode for new files
CMA3000 Accelerometer Driver
Proximity : Proximity sensor enable in kernel config
USB: Avoid DMA mapping of control transfer buffers.
ARM: Improve the L2 cache performance when PL310 is used
KS8851: Destroy ethernet work queue in exit path
KS8851: Use dedicated work queue for ethernet.
USB: MUSB: Fix enumeration when device connected at boot up.
USB: MUSB: Add phoenix initialization under OMAP4.
Fix for bus width which improves SD card's peformance.
OMAP: Add printk and correct LL debug
sDMA: Descriptor autoloading feature
USB : MUSB : Phoenix settings for Host mode
USB : MUSB : Phoenix settings for USB device mode
OMAP4: Enable Mentor USB options in defconfig
USB: MUSB: Add OMAP4 support in MUSB driver
USB: MUSB: Enable MUSB for OMAP4 in Kconfig
USB: MUSB: Set transceiver interface type
ARM : OMAP4 : Add USB support to 4430 SDP board file
SRAM: hack it to non-cached for EMU
Remove the domain switching on ARMv6k/v7 CPUs
Add "nol2x0" early param to avoid initialisation of the L2 controller
Correct the cpu_architecture() function for ARMv7
smsc911x: Add spinlocks around registers access
Call flush_dcache_page in usb_stor_access_xfer_buf
ARM: Defer the L_PTE_EXEC flag setting to update_mmu_cache() on SMP
ARM: Assume new page cache pages have dirty D-cache
ARM: Use lazy cache flushing on ARMv7 SMP systems
OMAP4: Networking: Defconfig Support
OMAP4: Ethernet: KS8851 Board Support
OMAP4: SPI: Fix Driver Kconfig
omap: i2c: Add i2c support on omap4 platform
omap4: add i2c1 peripherals data
omap4: Enable RTC and regulator support
omap4: Add i2c board support on omap4430 sdp platform
omap4: Move SOC specific code from board file
Checksums-Sha1:
534926f7bed4b03add608ab29d7071ac6855bd29 1143 linux-ti-omap4_2.6.34-900.1.dsc
237d148e21f5bcb628019849cbe7bc9c3c5fdd9b 90322633 linux-ti-omap4_2.6.34-900.1.tar.gz
Checksums-Sha256:
2ccee4a92d79c4b639e8a8239ce6580290d4cc966809671e014034ef8f64c663 1143 linux-ti-omap4_2.6.34-900.1.dsc
4e2200cd4487146aae7bf041898741a8cc00014ce5f795e68146b45cd5d20f78 90322633 linux-ti-omap4_2.6.34-900.1.tar.gz
Files:
4be87778573efa95e502cec06c0645c6 1143 devel optional linux-ti-omap4_2.6.34-900.1.dsc
4f50747a502c378fbf08b1fc6cb2569a 90322633 devel optional linux-ti-omap4_2.6.34-900.1.tar.gz
More information about the Maverick-changes
mailing list