MAAS Curtin Issues

Wed Jul 12 14:24:49 UTC 2017

Tom,

Haha, glad it is working. Let us know if you have any other issues.

Thanks,
Blake

On Wed, Jul 12, 2017 at 10:15 AM, Tom Barber <tom at spicule.co.uk> wrote:

> Yeah apologies for the false alarm! For the record, I hate UEFI! ;)
>
> Tom
>
> On Wed, Jul 12, 2017 at 3:03 PM, Tom Barber <tom at spicule.co.uk> wrote:
>
>> I've just realised I didn't!! I have a sneaking suspicion the storage has
>> just been realigned and will sort it out. I'll close this thread down in
>> about 5 minutes I suspect ;)
>>
>> Tom
>>
>> On Wed, Jul 12, 2017 at 3:01 PM, Blake Rouse <blake.rouse at canonical.com>
>> wrote:
>>
>>> Tom,
>>>
>>> Did you re-commission after changing the machine from UEFI to Legacy?
>>>
>>> Thanks,
>>> Blake
>>>
>>> On Wed, Jul 12, 2017 at 9:39 AM, Tom Barber <tom at spicule.co.uk> wrote:
>>>
>>>> (sorry, Xenial hosts, MAAS 2.1)
>>>>
>>>> On Wed, Jul 12, 2017 at 2:38 PM, Tom Barber <tom at spicule.co.uk> wrote:
>>>>
>>>>> Hi folks
>>>>>
>>>>> I'm testing MAAS on an UDOO X86 and have 99% of it working.
>>>>>
>>>>> I disabled UEFI to get stuff working smoother, now machines
>>>>> commission, they switch on and off etc, but when I tell it to boot into
>>>>> ubuntu I get an error from curtin:
>>>>>
>>>>>
>>>>> Creating config file /etc/default/grub with new version
>>>>>  Generating grub configuration file ...
>>>>>  Found linux image: /boot/vmlinuz-4.8.0-58-generic
>>>>>  Found initrd image: /boot/initrd.img-4.8.0-58-generic
>>>>>  /run/lvm/lvmetad.socket: connect failed: No such file or directory
>>>>>  WARNING: Failed to connect to lvmetad. Falling back to internal
>>>>> scanning.
>>>>>  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 4128768:
>>>>> Input/output error
>>>>>  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 4186112:
>>>>> Input/output error
>>>>>  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 0: Input/output error
>>>>>  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 4096: Input/output
>>>>> error
>>>>>  done
>>>>>  Setting up grub-gfxpayload-lists (0.7) ...
>>>>>  Processing triggers for libc-bin (2.23-0ubuntu9) ...
>>>>>  Processing triggers for systemd (229-4ubuntu17) ...
>>>>>  Processing triggers for ureadahead (0.100.0-19) ...
>>>>>  Processing triggers for dbus (1.10.6-1ubuntu3.3) ...
>>>>>  Setting up swapspace version 1, size = 3.8 GiB (4046450688
>>>>> <(404)%20645-0688> bytes)
>>>>>  no label, UUID=d23e4cfb-d777-4ef1-83c8-6477a6519b88
>>>>>  Unexpected error while running command.
>>>>>  Command: ['sh', '-c', 'exec "$0" "$@" 2>&1', 'install-grub',
>>>>> '/tmp/tmpkw3_14iy/target', '/dev/mmcblk0']
>>>>>  Exit code: 1
>>>>>  Reason: -
>>>>>  Stdout: + pkg=grub-pc
>>>>>  + shift
>>>>>  + dpkg-reconfigure grub-pc
>>>>>  Replacing config file /etc/default/grub with new version
>>>>>  Generating grub configuration file ...
>>>>>  Found linux image: /boot/vmlinuz-4.8.0-58-generic
>>>>>  Found initrd image: /boot/initrd.img-4.8.0-58-generic
>>>>>  done
>>>>>  + update-grub
>>>>>  Generating grub configuration file ...
>>>>>  Found linux image: /boot/vmlinuz-4.8.0-58-generic
>>>>>  Found initrd image: /boot/initrd.img-4.8.0-58-generic
>>>>>  done
>>>>>  + grub-install /dev/mmcblk0
>>>>>  Installing for i386-pc platform.
>>>>>  grub-install: warning: this GPT partition label contains no BIOS Boot
>>>>> Partition; embedding won't be possible.
>>>>>  grub-install: warning: Embedding is not possible. GRUB can only be
>>>>> installed in this setup by using blocklists. However, blocklists are
>>>>> UNRELIABLE and their use is discouraged..
>>>>>  grub-install: error: will not proceed with blocklists.
>>>>>  + exit
>>>>>  failed to install grub!
>>>>>
>>>>>
>>>>> If I install Centos though it runs fine. Clearly its unhappy about the
>>>>> internal MMC disk partitioning but its only the defaults and a manual
>>>>> install of Xenial works fine.
>>>>>
>>>>> Anyone got anything I could tweak to see if it gets further?
>>>>>
>>>>> Thanks
>>>>>
>>>>> Tom
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Tom Barber
>>>>> CTO Spicule LTD
>>>>> tom at spicule.co.uk
>>>>>
>>>>> http://spicule.co.uk
>>>>>
>>>>> @spiculeim <http://twitter.com/spiculeim>
>>>>>
>>>>> Schedule a meeting with me <http://meetme.so/spicule>
>>>>>
>>>>> GB: +44(0)5603641316 <+44%2056%200364%201316>
>>>>> US: +18448141689 <(844)%20814-1689>
>>>>>
>>>>> <https://leanpub.com/juju-cookbook>
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Tom Barber
>>>> CTO Spicule LTD
>>>> tom at spicule.co.uk
>>>>
>>>> http://spicule.co.uk
>>>>
>>>> @spiculeim <http://twitter.com/spiculeim>
>>>>
>>>> Schedule a meeting with me <http://meetme.so/spicule>
>>>>
>>>> GB: +44(0)5603641316 <+44%2056%200364%201316>
>>>> US: +18448141689 <(844)%20814-1689>
>>>>
>>>> <https://leanpub.com/juju-cookbook>
>>>>
>>>> --
>>>> Maas-devel mailing list
>>>> Maas-devel at lists.ubuntu.com
>>>> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailm
>>>> an/listinfo/maas-devel
>>>>
>>>>
>>>
>>
>>
>> --
>> Tom Barber
>> CTO Spicule LTD
>> tom at spicule.co.uk
>>
>> http://spicule.co.uk
>>
>> @spiculeim <http://twitter.com/spiculeim>
>>
>> Schedule a meeting with me <http://meetme.so/spicule>
>>
>> GB: +44(0)5603641316 <+44%2056%200364%201316>
>> US: +18448141689 <(844)%20814-1689>
>>
>> <https://leanpub.com/juju-cookbook>
>>
>
>
>
> --
> Tom Barber
> CTO Spicule LTD
> tom at spicule.co.uk
>
> http://spicule.co.uk
>
> @spiculeim <http://twitter.com/spiculeim>
>
> Schedule a meeting with me <http://meetme.so/spicule>
>
> GB: +44(0)5603641316 <+44%2056%200364%201316>
> US: +18448141689 <(844)%20814-1689>
>
> <https://leanpub.com/juju-cookbook>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/maas-devel/attachments/20170712/52d44474/attachment.html>