[ubuntu/lucid] qemu-kvm 0.12.3-0ubuntu2 (Accepted)

[Loic Minier]

qemu-kvm (0.12.3-0ubuntu2) lucid; urgency=low

  * New patch, arm-host-fix-compiler-warning, drops __arm__ specific code
    which was probably FPA specific (certainly not ARM/VFP) and was dropped
    upstream in bc4347b883e8175dadef77ed9e02ccaa5e8eba94; helps build on
    armel.
  * Configure builds with --disable-strip to get useful -dbgsym packages.
  * Also configure the static build with --disable-blobs and
    --audio-drv-list=.
  * Configure builds with --interp-prefix=/etc/qemu-binfmt/%M as to allow
    overriding shared libs etc. with files over there; this matches Debian's
    config.
  * Match Debian's audio-drv-list to only build ALSA on linux.
  * Also filter-out config-host.mak when copying files to the static build dir
    to avoid a race if the build is interrupted before the static configure
    has run.
  * After careful examination, drop TARGET_SYSTEM_TCG and TARGET_LINUX_TCG;
    the upstream configure turns all these on by default plus one recently
    added architecture (microblaze) which proves that this list can't be kept
    up-to-date.  Also drop ia64 specific settings -- the ia64 build doesn't
    pass in Ubuntu ATM anyway, and Debian doesn't special ia64, so it can only
    help, right?  Do however pass --target-list="" for now as the current
    upstream configure sets x86_64-softmmu as the default.
  * Also drop TARGET_STATIC_TCG and pass --disable-system; this will turn off
    all softmmu targets and do the right thing; while this will increase the
    size of the binary package, this will also permit development towards
    other targets such as powerpc, or running x86 binaries from ARM.  Also
    pass --target-list="".
  * Drop unused QEMU_EXE and BUILD_CPU vars.
  * Add more binfmts, copied from the Debian qemu package but modified to
    point at the qemu-kvm-extras-static package instead of qemu-user-static
    and to set "credentials yes"; also dropped spurious trailing newlines on
    some of them.  Copy the logic to set BINFMT_TARGETS from the Debian
    package as well.
  * Create qemu-kvm-extras dirs via debian/*.dirs instead of mkdir.
  * Depend on $(QUILT_STAMPFN) instead of patch to avoid rebuilding everything
    every time.

Date: Sat, 27 Feb 2010 11:59:10 +0100
Changed-By: Loïc Minier <loic.minier at ubuntu.com>
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Signed-By: Loïc Minier <lool at dooz.org>
https://launchpad.net/ubuntu/lucid/+source/qemu-kvm/0.12.3-0ubuntu2
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Sat, 27 Feb 2010 11:59:10 +0100
Source: qemu-kvm
Binary: qemu-kvm qemu-kvm-extras qemu-kvm-extras-static qemu-arm-static kvm qemu
Architecture: source
Version: 0.12.3-0ubuntu2
Distribution: lucid
Urgency: low
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Loïc Minier <loic.minier at ubuntu.com>
Description: 
 kvm        - dummy transitional pacakge from kvm to qemu-kvm
 qemu       - dummy transitional pacakge from qemu to qemu-kvm
 qemu-arm-static - dummy transitional package for qemu-kvm-extras-static
 qemu-kvm   - Full virtualization on i386 and amd64 hardware
 qemu-kvm-extras - fast processor emulator binaries for non-x86 architectures
 qemu-kvm-extras-static - static QEMU user mode emulation binaries
Changes: 
 qemu-kvm (0.12.3-0ubuntu2) lucid; urgency=low
 .
   * New patch, arm-host-fix-compiler-warning, drops __arm__ specific code
     which was probably FPA specific (certainly not ARM/VFP) and was dropped
     upstream in bc4347b883e8175dadef77ed9e02ccaa5e8eba94; helps build on
     armel.
   * Configure builds with --disable-strip to get useful -dbgsym packages.
   * Also configure the static build with --disable-blobs and
     --audio-drv-list=.
   * Configure builds with --interp-prefix=/etc/qemu-binfmt/%M as to allow
     overriding shared libs etc. with files over there; this matches Debian's
     config.
   * Match Debian's audio-drv-list to only build ALSA on linux.
   * Also filter-out config-host.mak when copying files to the static build dir
     to avoid a race if the build is interrupted before the static configure
     has run.
   * After careful examination, drop TARGET_SYSTEM_TCG and TARGET_LINUX_TCG;
     the upstream configure turns all these on by default plus one recently
     added architecture (microblaze) which proves that this list can't be kept
     up-to-date.  Also drop ia64 specific settings -- the ia64 build doesn't
     pass in Ubuntu ATM anyway, and Debian doesn't special ia64, so it can only
     help, right?  Do however pass --target-list="" for now as the current
     upstream configure sets x86_64-softmmu as the default.
   * Also drop TARGET_STATIC_TCG and pass --disable-system; this will turn off
     all softmmu targets and do the right thing; while this will increase the
     size of the binary package, this will also permit development towards
     other targets such as powerpc, or running x86 binaries from ARM.  Also
     pass --target-list="".
   * Drop unused QEMU_EXE and BUILD_CPU vars.
   * Add more binfmts, copied from the Debian qemu package but modified to
     point at the qemu-kvm-extras-static package instead of qemu-user-static
     and to set "credentials yes"; also dropped spurious trailing newlines on
     some of them.  Copy the logic to set BINFMT_TARGETS from the Debian
     package as well.
   * Create qemu-kvm-extras dirs via debian/*.dirs instead of mkdir.
   * Depend on $(QUILT_STAMPFN) instead of patch to avoid rebuilding everything
     every time.
Checksums-Sha1: 
 77857e6867e79d75e75564bebb1bc4882a31238a 1394 qemu-kvm_0.12.3-0ubuntu2.dsc
 c427dc68cd14d8af0ea7829379dbef17321a42a6 50497 qemu-kvm_0.12.3-0ubuntu2.diff.gz
Checksums-Sha256: 
 9e89f94f43f8dc6031b057b06de0c5d135e444bc0ad7c4b615f6d7f9f1fdae7b 1394 qemu-kvm_0.12.3-0ubuntu2.dsc
 ad3fba0e9a8a0e10ae1eb5534e1a63df40f637cf7bc1ee86607131278a82bbcf 50497 qemu-kvm_0.12.3-0ubuntu2.diff.gz
Files: 
 21ab0e92592d1fa195a91eb208bd592d 1394 misc optional qemu-kvm_0.12.3-0ubuntu2.dsc
 b6104c97a1e2d49ab1517f6fd235f4d9 50497 misc optional qemu-kvm_0.12.3-0ubuntu2.diff.gz

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)

iEYEARECAAYFAkuI+zsACgkQ4VUX8isJIMCgAwCZAShU/1f30U3HFJ+eMuOycTOT
8sIAn0lcuNqJv7VtxR1IkopDKlJNI86F
=be+m
-----END PGP SIGNATURE-----