[lubuntu-users] Fujitsu Lifebook S761 (scroll wheel-pad issue)

[Israel]

Hi,
It is really pretty easy to be honest.
if you want to test a parameter just run
synclient [PARAMETER]

I have a little GUI program for doing it, and I will send it your way.

On 07/23/2016 05:09 PM, scrooyahoo at riseup.net wrote:
> @Israel,
>
> xinput list-props "SynPS/2 Synaptics TouchPad" | grep Capabilities
>     Synaptics Capabilities (320):    1, 0, 1, 1, 1, 1, 1
>
> xinput list-props "SynPS/2 Synaptics TouchPad"
> https://paste.ubuntu.com/20652740/
>
> So.. can i temporary set up a new user 'testuser' and do some tests 
> there without affecting my main user config
> how do i make sure that my tests only affect the testuser account?
>
> is it just a matter of putting that config in the /home of that user 
> and make my changes there??
>
> :-) synclient shows me that i'm getting closer.
>
>
> synclient -l
> Parameter settings:
>     LeftEdge                = 1759
>     RightEdge               = 5287
>     TopEdge                 = 1640
>     BottomEdge              = 4494
>     FingerLow               = 25
>     FingerHigh              = 30
>     MaxTapTime              = 180
>     MaxTapMove              = 232
>     MaxDoubleTapTime        = 100
>     SingleTapTimeout        = 180
>     ClickTime               = 100
>     EmulateMidButtonTime    = 75
>     EmulateTwoFingerMinZ    = 282
>     EmulateTwoFingerMinW    = 7
>     VertScrollDelta         = 105
>     HorizScrollDelta        = 105
>     VertEdgeScroll          = 1
>     HorizEdgeScroll         = 0
>     CornerCoasting          = 0
>     VertTwoFingerScroll     = 1
>     HorizTwoFingerScroll    = 0
>     MinSpeed                = 1
>     MaxSpeed                = 1.75
>     AccelFactor             = 0.0379147
>     UpDownScrolling         = 1
>     LeftRightScrolling      = 1
>     UpDownScrollRepeat      = 1
>     LeftRightScrollRepeat   = 1
>     ScrollButtonRepeat      = 100
>     TouchpadOff             = 0
>     LockedDrags             = 0
>     LockedDragTimeout       = 5000
>     RTCornerButton          = 2
>     RBCornerButton          = 3
>     LTCornerButton          = 0
>     LBCornerButton          = 0
>     TapButton1              = 1
>     TapButton2              = 3
>     TapButton3              = 0
>     ClickFinger1            = 1
>     ClickFinger2            = 1
>     ClickFinger3            = 0
>     CircularScrolling       = 0
>     CircScrollDelta         = 0.1
>     CircScrollTrigger       = 0
>     CircularPad             = 0
>     PalmDetect              = 0
>     PalmMinWidth            = 10
>     PalmMinZ                = 200
>     CoastingSpeed           = 20
>     CoastingFriction        = 50
>     PressureMotionMinZ      = 30
>     PressureMotionMaxZ      = 160
>     PressureMotionMinFactor = 1
>     PressureMotionMaxFactor = 1
>     ResolutionDetect        = 1
>     GrabEventDevice         = 0
>     TapAndDragGesture       = 1
>     AreaLeftEdge            = 0
>     AreaRightEdge           = 0
>     AreaTopEdge             = 0
>     AreaBottomEdge          = 0
>     HorizHysteresis         = 26
>     VertHysteresis          = 26
>     ClickPad                = 0
>
>
> looks like i need to find the correct config for these settings.
>
>     CircularScrolling       = 0
>     CircScrollDelta         = 0.1
>     CircScrollTrigger       = 0
>     CircularPad             = 0
>
>
> Scrolling could also be nice as 'scrub-wheel' for audio sequensers, 
> and video editors
> CircularPad could be interesting for panning over an image in gimp
>
> Can't beleive that nobody has explored this any deeper yet.
>
> Thanks a bunch, i'm still a bit nervous about screwing this up.
>
> i'll play with this tomorrow, and hope the CPU doesn't cook my leg.
>
> For now i just like to see this scrollpad working, and would be cool 
> if this would be working for ever Ubuntu user with this type of 
> laptop. (All Lifebook S series)
>
> I'll read this post again tomorrow, my brain is a bit fried at the 
> moment. It looks like this should be simple but this evening the penny 
> doesn't seem to drop. It could be a sunstitch...
>
>
>
>
>
> On 2016-07-23 02:35, Israel wrote:
>> Ok, this will show (numerically) your touchpad capabilities
>> (feel free to run it without grep to get the whole shebang, which
>> would be good to post to the list)
>> xinput list-props "SynPS/2 Synaptics TouchPad" | grep Capabilities
>>
>> Ok, so here is the synclient tutorial
>> LIST the things synclient can configure
>> synclient -l
>>
>> It might be a greaat idea to run
>> synclient -l > $HOME/initial-touchpad-setup
>>
>> this way you have a backup and a base to test from and go back to.
>>
>> you can then setup your device by settings those values individually...
>> Feel free to save your preferences as a script and start it
>> automatically when you log into your user
>> for example:
>> #/bin/bash
>> synclient MaxTapTime=180 MaxTapMove=221 MaxDoubleTapTime=180
>> SingleTapTimeout=180 ClickTime=100 EmulateMidButtonTime=75
>> EmulateTwoFingerMinZ=282 EmulateTwoFingerMinW=7 VertScrollDelta=100
>> HorizScrollDelta=100 VertEdgeScroll=1 HorizEdgeScroll=0
>> CornerCoasting=0 VertTwoFingerScroll=0 HorizTwoFingerScroll=0
>> TouchpadOff=0 LockedDrags=0 LockedDragTimeout=5000 RTCornerButton=0
>> RBCornerButton=0 LTCornerButton=0 LBCornerButton=0 TapButton1=0
>> TapButton2=0 TapButton3=0 ClickFinger1=1 ClickFinger2=1 ClickFinger3=0
>> GrabEventDevice=1 TapAndDragGesture=1 ClickPad=0
>>
>> This is just one I use in a window manager (not Lubuntu), so you will
>> need to modify it as your touchpad needs are most likely different.
>>
>> This should most likely solve your scrolling issue.  But maybe we need
>> to look more into what you need.
>>
>> It is quite possible that this secondary device is actually the same
>> thing (both pads connected to the same chip, and relayed to the mother
>> board as one device)  You most likely just need to adjust the ranges
>> so the secondary pad is within the specfied range.
>>
>> I do have a FLTK program for configuring settings for this, but I will
>> have to extract it from another program that it is part of IF you are
>> REALLY interested in it.  It is from a program to configure JWM (a
>> window manager) but controls virtually every synclient property, as I
>> really like configurability.
>>
>> ...
>>
>>
>> -- 
>> Regards
>
>


-- 
Regards