Formatting external hard drive
Wilbert Heeringa
wjheeringa at gmail.com
Thu Nov 5 22:22:10 UTC 2015
Hi Nio, hi Andre,
Many thanks for your response which I really appreciate a lot.
Each time I connect the hard drive, I hear the disk rotating for about 15
seconds, then it stops and I hear only some whizzing. The drive is not
listed in the file manager nor recognized in disk utilty, so I have no
choice how to format it.
Attached the output of dmesg, there it is recognized as a 'Very big
device' (line 1106).
My PC has only UBS 2.0 connections, I consider to buy a USB 3 PCI
Controller Card, such as the one here:
http://www.conrad.com/ce/en/product/1211117/31-ports-USB-30-controller-card-PCIe-Renkforce
Would this be a promising solution?
Best,
Wilbert
2015-11-02 22:09 GMT+01:00 Andre Campos Rodovalho <andre.rodovalho at gmail.com
>:
> *error fsyncing*/*closing*/dev/sdf: *input*/*output error*
>
> This Error makes me think you have a defective drive, or defective cable,
> or is trying to use a USB3 drive on a USB2 port, that might not throw
> enough energy...
>
> Try to read the system log and see if any other relevant error msg is
> shown. You can use the command dmesg to do so.
>
>
> 2015-11-02 17:53 GMT-02:00 Nio Wiklund <nio.wiklund at gmail.com>:
>
>> Den 2015-11-02 kl. 20:26, skrev Wilbert Heeringa:
>> > Dear everybody,
>> >
>> > I'm trying to format an external harddrive (Seagate Backup Plus 4 TB)
>> > with parted. When doing so, this results in an error message:
>> >
>> > /error fsyncing///closing//dev/sdf: /input///output error
>> >
>> > /
>> > Both gparted anddisk utility did not work either, butparted was the only
>> > program that gave a real error message.
>> >
>> > Does anyone have an idea how to proceed with this?
>> >
>> > Best,
>> > Wilbert
>> >
>> >
>>
>> Hi Wilbert,
>>
>> You need a GUID partition table, GPT (instead of the classical MSDOS
>> partition table) to manage drives with more than 2 TB.
>>
>> I'm not sure if USB 2 can manage more than 2 TB. I know USB 3 and eSATA
>> can manage it.
>>
>> Best regards
>> Nio
>>
>>
>> --
>> Lubuntu-users mailing list
>> Lubuntu-users at lists.ubuntu.com
>> Modify settings or unsubscribe at:
>> https://lists.ubuntu.com/mailman/listinfo/lubuntu-users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/lubuntu-users/attachments/20151105/2916694a/attachment-0001.html>
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-63-generic (buildd at lgw01-14) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #103-Ubuntu SMP Fri Aug 14 21:43:30 UTC 2015 (Ubuntu 3.13.0-63.103-generic 3.13.11-ckt25)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd7a173f] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd7a1740-0x00000000dd7a379f] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dd7a37a0-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000010fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq dc7900 Small Form Factor/3031h, BIOS 786G1 v01.16 03/05/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x110000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0DD800000 mask FFF800000 uncachable
[ 0.000000] 2 base 0DE000000 mask FFE000000 uncachable
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 100000000 mask FF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3544MB, range: 8MB, type UC
[ 0.000000] reg 2, base: 3552MB, range: 32MB, type UC
[ 0.000000] reg 3, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 256MB, type WB
[ 0.000000] total RAM covered: 3800M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3544MB, range: 8MB, type UC
[ 0.000000] reg 2, base: 3552MB, range: 32MB, type UC
[ 0.000000] reg 3, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 256MB, type WB
[ 0.000000] e820: update [mem 0xdd800000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [c00f9bf0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[ 0.000000] [mem 0x34000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01b9b000, 0x01b9bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35c22000-0x36e08fff]
[ 0.000000] ACPI: RSDP 000e5810 000014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT dd7c5840 000044 (v01 HPQOEM SLIC-BPC 20090305 00000000)
[ 0.000000] ACPI: FACP dd7c58e8 000074 (v01 COMPAQ EAGLLAKE 00000001 00000000)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000050/0x0 (20131115/tbfadt-603)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20131115/tbfadt-653)
[ 0.000000] ACPI: DSDT dd7c5e27 00A620 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS dd7c5800 000040
[ 0.000000] ACPI: APIC dd7c595c 000084 (v01 COMPAQ EAGLLAKE 00000001 00000000)
[ 0.000000] ACPI: ASF! dd7c59e0 000063 (v32 COMPAQ EAGLLAKE 00000001 00000000)
[ 0.000000] ACPI: MCFG dd7c5a43 00003C (v01 COMPAQ EAGLLAKE 00000001 00000000)
[ 0.000000] ACPI: TCPA dd7c5a7f 000032 (v01 COMPAQ EAGLLAKE 00000001 00000000)
[ 0.000000] ACPI: SLIC dd7c5ab1 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
[ 0.000000] ACPI: HPET dd7c5c27 000038 (v01 COMPAQ EAGLLAKE 00000001 00000000)
[ 0.000000] ACPI: DMAR dd7c5c5f 0001C8 (v01 COMPAQ EAGLLAKE 00000001 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3460MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01b9c000, 0x01b9cfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x0fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xdd7a0fff]
[ 0.000000] node 0: [mem 0x00000000-0x0fffffff]
[ 0.000000] On node 0 totalpages: 972607
[ 0.000000] free_area_init_node: node 0, pgdat c19a1780, node_mem_map f3a22020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 6921 pages used for memmap
[ 0.000000] HighMem zone: 744355 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[ 0.000000] e820: [mem 0xe0000000-0xf3ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bb4000 s35520 r0 d21824 u57344
[ 0.000000] pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 970823
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-63-generic root=UUID=0d912904-fb7c-413c-ac12-ebd4b8063ada ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 8912888 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at /build/linux-zqVCY7/linux-3.13.0/drivers/iommu/dmar.c:488 warn_invalid_dmar+0x8d/0xa0()
[ 0.000000] Your BIOS is broken; DMAR reported at address fed90000 returns all ones!
[ 0.000000] BIOS vendor: Hewlett-Packard; Ver: 786G1 v01.16; Product Version:
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.0-63-generic #103-Ubuntu
[ 0.000000] Hardware name: Hewlett-Packard HP Compaq dc7900 Small Form Factor/3031h, BIOS 786G1 v01.16 03/05/2009
[ 0.000000] 00000000 00000000 c191fe88 c16584ff c191fec8 c191feb8 c1056b3e c18a8a94
[ 0.000000] c191fee8 00000000 c18a8afc 000001e8 c15531dd c15531dd c1b9a010 c1b9a060
[ 0.000000] ffe15c5f c191fed0 c1056bd2 0000000b c191fec8 c18a8a94 c191fee8 c191ff14
[ 0.000000] Call Trace:
[ 0.000000] [<c16584ff>] dump_stack+0x41/0x52
[ 0.000000] [<c1056b3e>] warn_slowpath_common+0x7e/0xa0
[ 0.000000] [<c15531dd>] ? warn_invalid_dmar+0x8d/0xa0
[ 0.000000] [<c15531dd>] ? warn_invalid_dmar+0x8d/0xa0
[ 0.000000] [<c1056bd2>] warn_slowpath_fmt_taint+0x32/0x40
[ 0.000000] [<c15531dd>] warn_invalid_dmar+0x8d/0xa0
[ 0.000000] [<c1a0fca9>] check_zero_address+0x112/0x12e
[ 0.000000] [<c1a0fcd7>] detect_intel_iommu+0x12/0x78
[ 0.000000] [<c19c9681>] pci_iommu_alloc+0x3b/0x5a
[ 0.000000] [<c19d73d7>] mem_init+0xe/0x205
[ 0.000000] [<c1653c3f>] ? printk+0x50/0x52
[ 0.000000] [<c19e972f>] ? page_cgroup_init_flatmem+0x6d/0x98
[ 0.000000] [<c19bf90d>] start_kernel+0x1cf/0x3b9
[ 0.000000] [<c19bf575>] ? repair_env_string+0x51/0x51
[ 0.000000] [<c19bf39c>] i386_start_kernel+0x137/0x13a
[ 0.000000] ---[ end trace 46f6d7d7a29c5e77 ]---
[ 0.000000] Initializing HighMem for node 0 (00037bfe:00110000)
[ 0.000000] Memory: 3815516K/3890428K available (6558K kernel code, 641K rwdata, 2772K rodata, 880K init, 924K bss, 74912K reserved, 2977420K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc19bf000 - 0xc1a9b000 ( 880 kB)
[ 0.000000] .data : 0xc1667df4 - 0xc19be640 (3418 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1667df4 (6559 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f3408000 soft=f340a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3158.546 MHz processor
[ 0.004001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6317.09 BogoMIPS (lpj=12634184)
[ 0.004004] pid_max: default: 32768 minimum: 301
[ 0.004028] Security Framework initialized
[ 0.004045] AppArmor: AppArmor initialized
[ 0.004046] Yama: becoming mindful.
[ 0.004084] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004086] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.008048] Initializing cgroup subsys memory
[ 0.008055] Initializing cgroup subsys devices
[ 0.008057] Initializing cgroup subsys freezer
[ 0.008059] Initializing cgroup subsys blkio
[ 0.008061] Initializing cgroup subsys perf_event
[ 0.008063] Initializing cgroup subsys hugetlb
[ 0.008086] CPU: Physical Processor ID: 0
[ 0.008087] CPU: Processor Core ID: 0
[ 0.008090] mce: CPU supports 6 MCE banks
[ 0.008096] CPU0: Thermal monitoring enabled (TM2)
[ 0.008099] process: using mwait in idle threads
[ 0.008107] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.008107] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.008107] tlb_flushall_shift: -1
[ 0.008370] Freeing SMP alternatives memory: 32K (c1a9b000 - c1aa3000)
[ 0.009182] ACPI: Core revision 20131115
[ 0.011475] ACPI: All ACPI Tables successfully acquired
[ 0.012006] ftrace: allocating 27881 entries in 55 pages
[ 0.020049] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020395] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061248] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz (fam: 06, model: 17, stepping: 0a)
[ 0.064000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.064000] ... version: 2
[ 0.064000] ... bit width: 40
[ 0.064000] ... generic registers: 2
[ 0.064000] ... value mask: 000000ffffffffff
[ 0.064000] ... max period: 000000007fffffff
[ 0.064000] ... fixed-purpose events: 3
[ 0.064000] ... event mask: 0000000700000003
[ 0.064000] CPU 1 irqstacks, hard=f3500000 soft=f3502000
[ 0.064000] x86: Booting SMP configuration:
[ 0.008000] Initializing CPU#1
[ 0.064000] .... node #0, CPUs: #1
[ 0.074552] x86: Booted up 1 node, 2 CPUs
[ 0.074555] smpboot: Total of 2 processors activated (12634.18 BogoMIPS)
[ 0.074642] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.076095] devtmpfs: initialized
[ 0.076178] EVM: security.selinux
[ 0.076180] EVM: security.SMACK64
[ 0.076181] EVM: security.ima
[ 0.076182] EVM: security.capability
[ 0.076258] PM: Registering ACPI NVS region [mem 0xdd7a1740-0xdd7a379f] (8288 bytes)
[ 0.076271] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 0.077100] pinctrl core: initialized pinctrl subsystem
[ 0.077161] regulator-dummy: no parameters
[ 0.077186] RTC time: 20:26:42, date: 11/05/15
[ 0.077219] NET: Registered protocol family 16
[ 0.077348] EISA bus registered
[ 0.077350] cpuidle: using governor ladder
[ 0.077351] cpuidle: using governor menu
[ 0.077351] ACPI: bus type PCI registered
[ 0.077351] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.077351] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.077351] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.077351] PCI: Using MMCONFIG for extended config space
[ 0.077351] PCI: Using configuration type 1 for base access
[ 0.077351] bio: create slab <bio-0> at 0
[ 0.077351] ACPI: Added _OSI(Module Device)
[ 0.077351] ACPI: Added _OSI(Processor Device)
[ 0.077351] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.077351] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.128069] ACPI: SSDT dd7d161e 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 0.128348] ACPI: Dynamic OEM Table Load:
[ 0.128350] ACPI: SSDT (null) 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 0.152049] ACPI: SSDT dd7d136e 0002B0 (v01 COMPAQ CST 00000001 MSFT 0100000E)
[ 0.152313] ACPI: Dynamic OEM Table Load:
[ 0.152314] ACPI: SSDT (null) 0002B0 (v01 COMPAQ CST 00000001 MSFT 0100000E)
[ 0.188215] ACPI: Interpreter enabled
[ 0.188227] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.188230] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.188241] ACPI: (supports S0 S3 S4 S5)
[ 0.188242] ACPI: Using IOAPIC for interrupt routing
[ 0.188263] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.188350] ACPI: No dock devices found.
[ 0.203988] acpi LNXCPU:00: Invalid PBLK length [7]
[ 0.204008] acpi LNXCPU:01: Invalid PBLK length [7]
[ 0.216216] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.216220] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.216224] ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20131115/nsarguments-189)
[ 0.216266] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211)
[ 0.216270] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f3426eb8), AE_ALREADY_EXISTS (20131115/psparse-536)
[ 0.216275] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.216279] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[ 0.216547] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.216702] PCI host bridge to bus 0000:00
[ 0.216705] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.216707] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff]
[ 0.216708] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.216710] pci_bus 0000:00: root bus resource [io 0x1000-0x2fff]
[ 0.216712] pci_bus 0000:00: root bus resource [io 0x3000-0x6fff]
[ 0.216713] pci_bus 0000:00: root bus resource [io 0x7000-0xafff]
[ 0.216715] pci_bus 0000:00: root bus resource [io 0xb000-0xffff]
[ 0.216716] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.216718] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf3ffffff]
[ 0.216720] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.216727] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
[ 0.216743] DMAR: Forcing write-buffer flush capability
[ 0.216744] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.216808] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
[ 0.216818] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.216823] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.216828] pci 0000:00:02.0: reg 0x20: [io 0x1250-0x1257]
[ 0.216901] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
[ 0.216908] pci 0000:00:02.1: reg 0x10: [mem 0xf0400000-0xf04fffff 64bit]
[ 0.216992] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
[ 0.217017] pci 0000:00:03.0: reg 0x10: [mem 0xf0526900-0xf052690f 64bit]
[ 0.217061] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.217123] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
[ 0.217138] pci 0000:00:03.2: reg 0x10: [io 0x1258-0x125f]
[ 0.217145] pci 0000:00:03.2: reg 0x14: [io 0x1290-0x1293]
[ 0.217152] pci 0000:00:03.2: reg 0x18: [io 0x1260-0x1267]
[ 0.217159] pci 0000:00:03.2: reg 0x1c: [io 0x1294-0x1297]
[ 0.217166] pci 0000:00:03.2: reg 0x20: [io 0x1200-0x120f]
[ 0.217254] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
[ 0.217267] pci 0000:00:03.3: reg 0x10: [io 0x1268-0x126f]
[ 0.217277] pci 0000:00:03.3: reg 0x14: [mem 0xf0524000-0xf0524fff]
[ 0.217449] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
[ 0.217464] pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff]
[ 0.217471] pci 0000:00:19.0: reg 0x14: [mem 0xf0525000-0xf0525fff]
[ 0.217478] pci 0000:00:19.0: reg 0x18: [io 0x1100-0x111f]
[ 0.217530] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.217574] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.217603] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
[ 0.217638] pci 0000:00:1a.0: reg 0x20: [io 0x1120-0x113f]
[ 0.217707] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.217735] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
[ 0.217770] pci 0000:00:1a.1: reg 0x20: [io 0x1140-0x115f]
[ 0.217840] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.217868] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
[ 0.217903] pci 0000:00:1a.2: reg 0x20: [io 0x1160-0x117f]
[ 0.217972] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.218008] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
[ 0.218026] pci 0000:00:1a.7: reg 0x10: [mem 0xf0526000-0xf05263ff]
[ 0.218102] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.218147] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.218179] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300
[ 0.218192] pci 0000:00:1b.0: reg 0x10: [mem 0xf0520000-0xf0523fff 64bit]
[ 0.218247] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.218314] pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
[ 0.218370] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.218415] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.218447] pci 0000:00:1c.4: [8086:3a78] type 01 class 0x060400
[ 0.218503] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.218549] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.218579] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
[ 0.218614] pci 0000:00:1d.0: reg 0x20: [io 0x1180-0x119f]
[ 0.218685] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.218712] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
[ 0.218748] pci 0000:00:1d.1: reg 0x20: [io 0x11a0-0x11bf]
[ 0.218817] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.218846] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
[ 0.218881] pci 0000:00:1d.2: reg 0x20: [io 0x11c0-0x11df]
[ 0.218950] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.218987] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
[ 0.219005] pci 0000:00:1d.7: reg 0x10: [mem 0xf0526400-0xf05267ff]
[ 0.219081] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.219126] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.219153] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.219230] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.219261] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100
[ 0.219407] pci 0000:00:1f.2: [8086:3a00] type 00 class 0x01018a
[ 0.219420] pci 0000:00:1f.2: reg 0x10: [io 0x1270-0x1277]
[ 0.219426] pci 0000:00:1f.2: reg 0x14: [io 0x1298-0x129b]
[ 0.219433] pci 0000:00:1f.2: reg 0x18: [io 0x1278-0x127f]
[ 0.219439] pci 0000:00:1f.2: reg 0x1c: [io 0x129c-0x129f]
[ 0.219446] pci 0000:00:1f.2: reg 0x20: [io 0x1210-0x121f]
[ 0.219452] pci 0000:00:1f.2: reg 0x24: [io 0x1220-0x122f]
[ 0.219543] pci 0000:00:1f.5: [8086:3a06] type 00 class 0x010185
[ 0.219556] pci 0000:00:1f.5: reg 0x10: [io 0x1280-0x1287]
[ 0.219562] pci 0000:00:1f.5: reg 0x14: [io 0x12a0-0x12a3]
[ 0.219569] pci 0000:00:1f.5: reg 0x18: [io 0x1288-0x128f]
[ 0.219575] pci 0000:00:1f.5: reg 0x1c: [io 0x12a4-0x12a7]
[ 0.219582] pci 0000:00:1f.5: reg 0x20: [io 0x1230-0x123f]
[ 0.219588] pci 0000:00:1f.5: reg 0x24: [io 0x1240-0x124f]
[ 0.219732] pci 0000:00:1c.0: PCI bridge to [bus 20]
[ 0.219797] pci 0000:00:1c.4: PCI bridge to [bus 30]
[ 0.219912] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.219920] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfebfffff] (subtractive decode)
[ 0.219922] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.219924] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff] (subtractive decode)
[ 0.219926] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff] (subtractive decode)
[ 0.219927] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff] (subtractive decode)
[ 0.219929] pci 0000:00:1e.0: bridge window [io 0xb000-0xffff] (subtractive decode)
[ 0.219931] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.219932] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf3ffffff] (subtractive decode)
[ 0.219934] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.219946] pci_bus 0000:00: on NUMA node 0
[ 0.220138] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.220190] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.220241] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.220291] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.220342] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.220392] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.220443] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.220493] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.220737] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.220741] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.220769] Found 1 acpi root devices
[ 0.220826] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.220826] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.220826] vgaarb: loaded
[ 0.220826] vgaarb: bridge control possible 0000:00:02.0
[ 0.220826] SCSI subsystem initialized
[ 0.220826] libata version 3.00 loaded.
[ 0.220826] ACPI: bus type USB registered
[ 0.220826] usbcore: registered new interface driver usbfs
[ 0.220826] usbcore: registered new interface driver hub
[ 0.220826] usbcore: registered new device driver usb
[ 0.220826] PCI: Using ACPI for IRQ routing
[ 0.221189] PCI: pci_cache_line_size set to 64 bytes
[ 0.221235] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.221237] e820: reserve RAM buffer [mem 0xdd7a1740-0xdfffffff]
[ 0.221305] NetLabel: Initializing
[ 0.221306] NetLabel: domain hash size = 128
[ 0.221307] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.221316] NetLabel: unlabeled traffic allowed by default
[ 0.221326] HPET: 8 timers in total, 4 timers will be used for per-cpu timer
[ 0.221326] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 0, 0
[ 0.221326] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.224013] hpet: hpet2 irq 40 for MSI
[ 0.224021] hpet: hpet3 irq 41 for MSI
[ 0.224021] Switched to clocksource hpet
[ 0.229889] AppArmor: AppArmor Filesystem Enabled
[ 0.229904] pnp: PnP ACPI init
[ 0.229912] ACPI: bus type PNP registered
[ 0.229951] pnp 00:00: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.229964] pnp 00:01: [dma 4]
[ 0.229979] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.230002] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.230025] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.230049] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.230073] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.230252] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.230386] pnp 00:07: [dma 2]
[ 0.230409] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.230459] pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.230481] pnp 00:09: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.230521] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.230694] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230734] system 00:0c: [io 0x04d0-0x04d1] has been reserved
[ 0.230737] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230791] system 00:0d: [io 0x0400-0x041f] has been reserved
[ 0.230793] system 00:0d: [io 0x0420-0x043f] has been reserved
[ 0.230795] system 00:0d: [io 0x0440-0x045f] has been reserved
[ 0.230797] system 00:0d: [io 0x0460-0x047f] has been reserved
[ 0.230799] system 00:0d: [io 0x0800-0x087f] has been reserved
[ 0.230801] system 00:0d: [io 0x0880-0x08ff] has been reserved
[ 0.230803] system 00:0d: [io 0xf800-0xf81f] has been reserved
[ 0.230805] system 00:0d: [io 0xf820-0xf83f] has been reserved
[ 0.230807] system 00:0d: [io 0xf840-0xf85f] has been reserved
[ 0.230809] system 00:0d: [io 0xf860-0xf87f] has been reserved
[ 0.230811] system 00:0d: [io 0xfa00-0xfa3f] has been reserved
[ 0.230812] system 00:0d: [io 0xfc00-0xfc7f] has been reserved
[ 0.230814] system 00:0d: [io 0xfc80-0xfcff] has been reserved
[ 0.230816] system 00:0d: [io 0xfe00-0xfe7f] has been reserved
[ 0.230818] system 00:0d: [io 0xfe80-0xfeff] has been reserved
[ 0.230820] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256082] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.256086] system 00:0e: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.256089] system 00:0e: [mem 0x000e4000-0x000fffff] could not be reserved
[ 0.256092] system 00:0e: [mem 0xfec01000-0xfecfffff] has been reserved
[ 0.256096] system 00:0e: [mem 0xfed00400-0xfed3ffff] has been reserved
[ 0.256099] system 00:0e: [mem 0xfed45000-0xffffffff] has been reserved
[ 0.256102] system 00:0e: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.256105] system 00:0e: [mem 0x000ce400-0x000e3fff] has been reserved
[ 0.256109] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.256122] pnp: PnP ACPI: found 15 devices
[ 0.256123] ACPI: bus type PNP unregistered
[ 0.256126] PnPBIOS: Disabled by ACPI PNP
[ 0.292380] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 20] add_size 1000
[ 0.292383] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000
[ 0.292386] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 20] add_size 200000
[ 0.292392] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 30] add_size 1000
[ 0.292396] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000
[ 0.292398] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 30] add_size 200000
[ 0.292407] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.292409] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.292411] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.292413] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.292415] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.292417] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.292420] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff]
[ 0.292422] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.292424] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
[ 0.292426] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref]
[ 0.292429] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.292432] pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.292434] pci 0000:00:1c.0: PCI bridge to [bus 20]
[ 0.292437] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.292441] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff]
[ 0.292444] pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.292448] pci 0000:00:1c.4: PCI bridge to [bus 30]
[ 0.292451] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.292454] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf85fffff]
[ 0.292458] pci 0000:00:1c.4: bridge window [mem 0xf8600000-0xf87fffff 64bit pref]
[ 0.292462] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.292471] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfebfffff]
[ 0.292473] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7]
[ 0.292474] pci_bus 0000:00: resource 6 [io 0x1000-0x2fff]
[ 0.292476] pci_bus 0000:00: resource 7 [io 0x3000-0x6fff]
[ 0.292477] pci_bus 0000:00: resource 8 [io 0x7000-0xafff]
[ 0.292479] pci_bus 0000:00: resource 9 [io 0xb000-0xffff]
[ 0.292481] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.292482] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xf3ffffff]
[ 0.292484] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.292486] pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
[ 0.292487] pci_bus 0000:20: resource 1 [mem 0xf8000000-0xf81fffff]
[ 0.292489] pci_bus 0000:20: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.292491] pci_bus 0000:30: resource 0 [io 0x3000-0x3fff]
[ 0.292492] pci_bus 0000:30: resource 1 [mem 0xf8400000-0xf85fffff]
[ 0.292494] pci_bus 0000:30: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref]
[ 0.292496] pci_bus 0000:07: resource 4 [mem 0xf8000000-0xfebfffff]
[ 0.292497] pci_bus 0000:07: resource 5 [io 0x0000-0x0cf7]
[ 0.292499] pci_bus 0000:07: resource 6 [io 0x1000-0x2fff]
[ 0.292500] pci_bus 0000:07: resource 7 [io 0x3000-0x6fff]
[ 0.292502] pci_bus 0000:07: resource 8 [io 0x7000-0xafff]
[ 0.292504] pci_bus 0000:07: resource 9 [io 0xb000-0xffff]
[ 0.292505] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.292507] pci_bus 0000:07: resource 11 [mem 0xe0000000-0xf3ffffff]
[ 0.292509] pci_bus 0000:07: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.292534] NET: Registered protocol family 2
[ 0.292691] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.292702] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.292717] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.292731] TCP: reno registered
[ 0.292734] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.292739] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.292780] NET: Registered protocol family 1
[ 0.292789] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.294430] PCI: CLS 64 bytes, default 64
[ 0.294468] Trying to unpack rootfs image as initramfs...
[ 0.561719] Freeing initrd memory: 18332K (f5c22000 - f6e09000)
[ 0.561908] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
[ 0.561915] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
[ 0.561991] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 0.561993] Scanning for low memory corruption every 60 seconds
[ 0.562212] Initialise system trusted keyring
[ 0.562257] audit: initializing netlink socket (disabled)
[ 0.562269] type=2000 audit(1446755201.560:1): initialized
[ 0.579435] bounce pool size: 64 pages
[ 0.579444] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.580618] zbud: loaded
[ 0.580688] VFS: Disk quotas dquot_6.5.2
[ 0.580728] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.581122] fuse init (API version 7.22)
[ 0.581195] msgmni has been set to 1672
[ 0.581247] Key type big_key registered
[ 0.581771] Key type asymmetric registered
[ 0.581773] Asymmetric key parser 'x509' registered
[ 0.581799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.581835] io scheduler noop registered
[ 0.581836] io scheduler deadline registered (default)
[ 0.581861] io scheduler cfq registered
[ 0.581966] pcieport 0000:00:1c.0: irq 44 for MSI/MSI-X
[ 0.582154] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[ 0.582216] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.582228] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.582264] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.582266] vesafb: scrolling: redraw
[ 0.582267] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.582272] mtrr: type mismatch for e0000000,800000 old: write-back new: write-combining
[ 0.582274] mtrr: type mismatch for e0000000,400000 old: write-back new: write-combining
[ 0.582276] mtrr: type mismatch for e0000000,200000 old: write-back new: write-combining
[ 0.582278] mtrr: type mismatch for e0000000,100000 old: write-back new: write-combining
[ 0.582279] mtrr: type mismatch for e0000000,80000 old: write-back new: write-combining
[ 0.582281] mtrr: type mismatch for e0000000,40000 old: write-back new: write-combining
[ 0.582283] mtrr: type mismatch for e0000000,20000 old: write-back new: write-combining
[ 0.582285] mtrr: type mismatch for e0000000,10000 old: write-back new: write-combining
[ 0.582287] mtrr: type mismatch for e0000000,8000 old: write-back new: write-combining
[ 0.582288] mtrr: type mismatch for e0000000,4000 old: write-back new: write-combining
[ 0.582290] mtrr: type mismatch for e0000000,2000 old: write-back new: write-combining
[ 0.582292] mtrr: type mismatch for e0000000,1000 old: write-back new: write-combining
[ 0.582493] vesafb: framebuffer at 0xe0000000, mapped to 0xf8480000, using 5120k, total 5120k
[ 0.586612] Console: switching to colour frame buffer device 160x64
[ 0.590663] fb0: VESA VGA frame buffer device
[ 0.590679] intel_idle: does not run on family 6 model 23
[ 0.590685] ipmi message handler version 39.2
[ 0.590748] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.590753] ACPI: Power Button [PBTN]
[ 0.590783] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.590786] ACPI: Power Button [PWRF]
[ 0.590861] Monitor-Mwait will be used to enter C-1 state
[ 0.590865] Monitor-Mwait will be used to enter C-2 state
[ 0.590867] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.590871] ACPI: acpi_idle registered with cpuidle
[ 0.591008] GHES: HEST is not enabled!
[ 0.591033] isapnp: Scanning for PnP cards...
[ 0.596041] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.616412] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.637516] 0000:00:03.3: ttyS4 at I/O 0x1268 (irq = 17, base_baud = 115200) is a 16550A
[ 0.637661] Linux agpgart interface v0.103
[ 0.637732] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[ 0.637764] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.638959] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.639047] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.639149] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16)
[ 0.888039] tpm_tis 00:09: TPM is disabled/deactivated (0x7)
[ 0.889100] brd: module loaded
[ 0.889670] loop: module loaded
[ 0.889774] ata_piix 0000:00:1f.2: version 2.13
[ 0.889909] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.900715] isapnp: No Plug & Play device found
[ 1.044350] scsi0 : ata_piix
[ 1.044417] scsi1 : ata_piix
[ 1.044450] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1210 irq 14
[ 1.044454] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1218 irq 15
[ 1.044573] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.200262] scsi2 : ata_piix
[ 1.200326] scsi3 : ata_piix
[ 1.200356] ata3: SATA max UDMA/133 cmd 0x1280 ctl 0x12a0 bmdma 0x1230 irq 18
[ 1.200359] ata4: SATA max UDMA/133 cmd 0x1288 ctl 0x12a4 bmdma 0x1238 irq 18
[ 1.200701] scsi4 : ata_generic
[ 1.200762] scsi5 : ata_generic
[ 1.200790] ata5: PATA max UDMA/100 cmd 0x1258 ctl 0x1290 bmdma 0x1200 irq 18
[ 1.200792] ata6: PATA max UDMA/100 cmd 0x1260 ctl 0x1294 bmdma 0x1208 irq 18
[ 1.201023] libphy: Fixed MDIO Bus: probed
[ 1.201105] tun: Universal TUN/TAP device driver, 1.6
[ 1.201106] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 1.201146] PPP generic driver version 2.4.2
[ 1.201264] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.201268] ehci-pci: EHCI PCI platform driver
[ 1.201398] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.201403] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.201415] ehci-pci 0000:00:1a.7: debug port 1
[ 1.205303] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.205315] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf0526000
[ 1.216014] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.216065] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.216068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.216071] usb usb1: Product: EHCI Host Controller
[ 1.216073] usb usb1: Manufacturer: Linux 3.13.0-63-generic ehci_hcd
[ 1.216076] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.216206] hub 1-0:1.0: USB hub found
[ 1.216219] hub 1-0:1.0: 6 ports detected
[ 1.216444] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.216449] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.216458] ehci-pci 0000:00:1d.7: debug port 1
[ 1.220349] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.220361] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf0526400
[ 1.232024] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.232083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.232086] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.232089] usb usb2: Product: EHCI Host Controller
[ 1.232091] usb usb2: Manufacturer: Linux 3.13.0-63-generic ehci_hcd
[ 1.232094] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.232206] hub 2-0:1.0: USB hub found
[ 1.232218] hub 2-0:1.0: 6 ports detected
[ 1.232328] ehci-platform: EHCI generic platform driver
[ 1.232334] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.232336] ohci-pci: OHCI PCI platform driver
[ 1.232344] ohci-platform: OHCI generic platform driver
[ 1.232350] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.232465] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.232469] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.232488] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001120
[ 1.232521] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.232523] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.232525] usb usb3: Product: UHCI Host Controller
[ 1.232526] usb usb3: Manufacturer: Linux 3.13.0-63-generic uhci_hcd
[ 1.232528] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.232600] hub 3-0:1.0: USB hub found
[ 1.232606] hub 3-0:1.0: 2 ports detected
[ 1.232773] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.232777] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.232803] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001140
[ 1.232835] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.232837] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.232839] usb usb4: Product: UHCI Host Controller
[ 1.232840] usb usb4: Manufacturer: Linux 3.13.0-63-generic uhci_hcd
[ 1.232842] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.232913] hub 4-0:1.0: USB hub found
[ 1.232918] hub 4-0:1.0: 2 ports detected
[ 1.233085] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.233089] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.233107] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001160
[ 1.233142] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.233143] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.233145] usb usb5: Product: UHCI Host Controller
[ 1.233147] usb usb5: Manufacturer: Linux 3.13.0-63-generic uhci_hcd
[ 1.233148] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.233220] hub 5-0:1.0: USB hub found
[ 1.233225] hub 5-0:1.0: 2 ports detected
[ 1.233391] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.233395] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.233413] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001180
[ 1.233447] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.233449] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.233450] usb usb6: Product: UHCI Host Controller
[ 1.233452] usb usb6: Manufacturer: Linux 3.13.0-63-generic uhci_hcd
[ 1.233453] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.233527] hub 6-0:1.0: USB hub found
[ 1.233532] hub 6-0:1.0: 2 ports detected
[ 1.233698] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.233702] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.233721] uhci_hcd 0000:00:1d.1: irq 21, io base 0x000011a0
[ 1.233754] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.233756] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.233757] usb usb7: Product: UHCI Host Controller
[ 1.233759] usb usb7: Manufacturer: Linux 3.13.0-63-generic uhci_hcd
[ 1.233761] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.233831] hub 7-0:1.0: USB hub found
[ 1.233837] hub 7-0:1.0: 2 ports detected
[ 1.234005] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.234009] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.234027] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000011c0
[ 1.234061] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.234063] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.234065] usb usb8: Product: UHCI Host Controller
[ 1.234066] usb usb8: Manufacturer: Linux 3.13.0-63-generic uhci_hcd
[ 1.234068] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.234140] hub 8-0:1.0: USB hub found
[ 1.234145] hub 8-0:1.0: 2 ports detected
[ 1.234266] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.237161] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.237165] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.237257] mousedev: PS/2 mouse device common for all mice
[ 1.237376] rtc_cmos 00:02: RTC can wake from S4
[ 1.237473] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.237493] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.237551] device-mapper: uevent: version 1.0.3
[ 1.237603] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel at redhat.com
[ 1.237619] platform eisa.0: Probing EISA bus 0
[ 1.237621] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.237623] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.237624] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.237626] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.237628] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.237629] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.237631] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.237633] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.237634] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.237636] platform eisa.0: EISA: Detected 0 cards
[ 1.237641] cpufreq-nforce2: No nForce2 chipset.
[ 1.237644] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.237751] TCP: cubic registered
[ 1.237830] NET: Registered protocol family 10
[ 1.237986] NET: Registered protocol family 17
[ 1.237994] Key type dns_resolver registered
[ 1.238127] Using IPI No-Shortcut mode
[ 1.238205] Loading compiled-in X.509 certificates
[ 1.240927] Loaded X.509 cert 'Magrathea: Glacier signing key: 4c6ca20988788cea7d674a4f55cf4d2766b200d6'
[ 1.240937] registered taskstats version 1
[ 1.242824] Key type trusted registered
[ 1.245902] Key type encrypted registered
[ 1.245905] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.267554] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.292052] tpm_tis 00:09: A TPM error (7) occurred attempting to read a pcr value
[ 1.292055] IMA: No TPM chip found, activating TPM-bypass!
[ 1.292313] regulator-dummy: disabling
[ 1.292362] Magic number: 7:901:446
[ 1.292423] rtc_cmos 00:02: setting system clock to 2015-11-05 20:26:43 UTC (1446755203)
[ 1.530531] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.530535] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.530536] EDD information not available.
[ 1.530560] PM: Hibernation image not present or could not be loaded.
[ 1.532014] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 1.541063] ata3: SATA link down (SStatus 0 SControl 310)
[ 1.689492] usb 1-2: New USB device found, idVendor=148f, idProduct=5370
[ 1.689495] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.689498] usb 1-2: Product: 802.11 n WLAN
[ 1.689500] usb 1-2: Manufacturer: Ralink
[ 1.689503] usb 1-2: SerialNumber: 1.0
[ 1.840071] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.840083] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.840093] ata2.01: link offline, clearing class 3 to NONE
[ 1.844062] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.844074] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.848135] ata2.00: ATAPI: hp DDVDW TS-H653R, 0E00, max UDMA/100
[ 1.856016] usb 1-4: new high-speed USB device number 4 using ehci-pci
[ 1.860126] ata1.00: ATA-7: WDC WD2500JS-60MHB1, 10.02E02, max UDMA/100
[ 1.860129] ata1.00: 488397168 sectors, multi 16: LBA48
[ 1.860136] ata1.01: ATA-8: ST3500418AS, HP34, max UDMA/100
[ 1.860139] ata1.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.864123] ata2.00: configured for UDMA/100
[ 1.876132] ata1.00: configured for UDMA/100
[ 1.892132] ata1.01: configured for UDMA/100
[ 1.892258] scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-60M 10.0 PQ: 0 ANSI: 5
[ 1.892351] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.892353] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.892393] sd 0:0:0:0: [sda] Write Protect is off
[ 1.892395] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.892416] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.892467] scsi 0:0:1:0: Direct-Access ATA ST3500418AS HP34 PQ: 0 ANSI: 5
[ 1.892558] sd 0:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.892620] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 1.893306] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-H653R 0E00 PQ: 0 ANSI: 5
[ 1.896938] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.896941] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.897045] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.897122] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 1.897751] sda: sda1 sda2 sda3
[ 1.897777] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.897781] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.897806] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.903464] sdb: sdb1
[ 1.903472] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.903681] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 2.063298] Freeing unused kernel memory: 880K (c19bf000 - c1a9b000)
[ 2.063329] Write protecting the kernel text: 6560k
[ 2.063391] Write protecting the kernel read-only data: 2776k
[ 2.063392] NX-protecting the kernel data: 5728k
[ 2.072664] systemd-udevd[111]: starting version 204
[ 2.095079] pps_core: LinuxPPS API ver. 1 registered
[ 2.095082] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 2.098263] PTP clock support registered
[ 2.109201] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 2.109204] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 2.109411] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.109428] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 2.120069] FDC 0 is a National Semiconductor PC87306
[ 2.242488] usb 1-4: New USB device found, idVendor=046d, idProduct=081d
[ 2.242492] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.242495] usb 1-4: SerialNumber: 9A4184D0
[ 2.300249] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 18:a9:05:16:cc:00
[ 2.300251] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.300283] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF
[ 2.480020] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 2.655833] usb 4-1: New USB device found, idVendor=046d, idProduct=c016
[ 2.655836] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.655839] usb 4-1: Product: Optical USB Mouse
[ 2.655842] usb 4-1: Manufacturer: Logitech
[ 2.665005] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.682169] usbcore: registered new interface driver usbhid
[ 2.682171] usbhid: USB HID core driver
[ 2.685547] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input5
[ 2.685836] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.1-1/input0
[ 2.768053] usb 2-6: new high-speed USB device number 2 using ehci-pci
[ 3.225157] usb 2-6: New USB device found, idVendor=1b1c, idProduct=1a0d
[ 3.225161] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.225164] usb 2-6: Product: Voyager GS
[ 3.225167] usb 2-6: Manufacturer: Corsair
[ 3.225169] usb 2-6: SerialNumber: 070847905A943D67
[ 3.231015] usb-storage 2-6:1.0: USB Mass Storage device detected
[ 3.231078] scsi6 : usb-storage 2-6:1.0
[ 3.231133] usbcore: registered new interface driver usb-storage
[ 4.228558] scsi 6:0:0:0: Direct-Access Corsair Voyager GS 000B PQ: 0 ANSI: 6
[ 4.228786] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 4.229924] sd 6:0:0:0: [sdc] 246546432 512-byte logical blocks: (126 GB/117 GiB)
[ 4.230545] sd 6:0:0:0: [sdc] Write Protect is off
[ 4.230550] sd 6:0:0:0: [sdc] Mode Sense: 45 00 00 00
[ 4.231172] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.576535] random: nonblocking pool is initialized
[ 4.728562] sdc: sdc1
[ 4.731294] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 11.244889] EXT4-fs (sdc1): INFO: recovery required on readonly filesystem
[ 11.244892] EXT4-fs (sdc1): write access will be enabled during recovery
[ 12.817707] EXT4-fs (sdc1): orphan cleanup on readonly fs
[ 12.817760] EXT4-fs (sdc1): 1 orphan inode deleted
[ 12.817761] EXT4-fs (sdc1): recovery complete
[ 12.857545] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 20.364256] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.431861] systemd-udevd[276]: starting version 204
[ 20.508070] lp: driver loaded but no devices found
[ 20.512045] [drm] Initialized drm 1.1.0 20060810
[ 20.522787] ppdev: user-space parallel port driver
[ 20.529451] mei_me 0000:00:03.0: irq 47 for MSI/MSI-X
[ 20.531727] wmi: Mapper loaded
[ 20.554050] [drm] Memory usable by graphics device = 2048M
[ 20.554054] checking generic (e0000000 500000) vs hw (e0000000 10000000)
[ 20.554056] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 20.554072] Console: switching to colour dummy device 80x25
[ 20.559536] ------------[ cut here ]------------
[ 20.559563] WARNING: CPU: 1 PID: 308 at /build/linux-zqVCY7/linux-3.13.0/drivers/gpu/drm/i915/intel_opregion.c:266 swsci+0x2c9/0x2e0 [i915]()
[ 20.559564] excessive driver sleep timeout (DSPL) 4294967295
[ 20.559565] Modules linked in: i915(+) parport_pc wmi mei_me mei video drm_kms_helper ppdev drm mac_hid i2c_algo_bit lp parport usb_storage hid_generic usbhid hid psmouse e1000e floppy ptp pps_core pata_acpi
[ 20.559581] CPU: 1 PID: 308 Comm: systemd-udevd Tainted: G I 3.13.0-63-generic #103-Ubuntu
[ 20.559582] Hardware name: Hewlett-Packard HP Compaq dc7900 Small Form Factor/3031h, BIOS 786G1 v01.16 03/05/2009
[ 20.559584] 00000000 00000000 f6b3baa0 c16584ff f6b3bae0 f6b3bad0 c1056b3e f90a325c
[ 20.559588] f6b3bafc 00000134 f90a3288 0000010a f9083459 f9083459 f8ab4940 f6ba4400
[ 20.559592] 000001f4 f6b3bae8 c1056b93 00000009 f6b3bae0 f90a325c f6b3bafc f6b3bb20
[ 20.559596] Call Trace:
[ 20.559602] [<c16584ff>] dump_stack+0x41/0x52
[ 20.559606] [<c1056b3e>] warn_slowpath_common+0x7e/0xa0
[ 20.559627] [<f9083459>] ? swsci+0x2c9/0x2e0 [i915]
[ 20.559648] [<f9083459>] ? swsci+0x2c9/0x2e0 [i915]
[ 20.559651] [<c1056b93>] warn_slowpath_fmt+0x33/0x40
[ 20.559671] [<f9083459>] swsci+0x2c9/0x2e0 [i915]
[ 20.559693] [<f90841b5>] ? intel_opregion_setup+0xa5/0x3c0 [i915]
[ 20.559696] [<c104a30f>] ? ioremap_cache+0x1f/0x30
[ 20.559717] [<f90842f1>] intel_opregion_setup+0x1e1/0x3c0 [i915]
[ 20.559738] [<f9079f92>] ? intel_setup_gmbus+0x212/0x270 [i915]
[ 20.559752] [<f901c613>] i915_driver_load+0x523/0xdd0 [i915]
[ 20.559763] [<f8dfdcfb>] drm_dev_register+0x8b/0x1a0 [drm]
[ 20.559772] [<f8dff7ee>] drm_get_pci_dev+0x7e/0x120 [drm]
[ 20.559776] [<c11defc7>] ? sysfs_do_create_link_sd.isra.2+0xa7/0x1c0
[ 20.559789] [<f901958a>] i915_pci_probe+0x3a/0x80 [i915]
[ 20.559792] [<c13352af>] pci_device_probe+0x6f/0xc0
[ 20.559794] [<c11df105>] ? sysfs_create_link+0x25/0x40
[ 20.559798] [<c1410fb3>] driver_probe_device+0x93/0x3a0
[ 20.559800] [<c1335202>] ? pci_match_device+0xb2/0xc0
[ 20.559802] [<c1411371>] __driver_attach+0x71/0x80
[ 20.559804] [<c1411300>] ? __device_attach+0x40/0x40
[ 20.559806] [<c140f477>] bus_for_each_dev+0x47/0x80
[ 20.559808] [<c1410a7e>] driver_attach+0x1e/0x20
[ 20.559810] [<c1411300>] ? __device_attach+0x40/0x40
[ 20.559812] [<c14106d7>] bus_add_driver+0x157/0x230
[ 20.559814] [<c1411939>] driver_register+0x59/0xe0
[ 20.559816] [<c104a8b0>] ? alloc_pmd_page+0x50/0x50
[ 20.559819] [<c1333ce2>] __pci_register_driver+0x32/0x40
[ 20.559827] [<f8dff985>] drm_pci_init+0xf5/0x100 [drm]
[ 20.559830] [<f8d3d000>] ? 0xf8d3cfff
[ 20.559843] [<f8d3d062>] i915_init+0x62/0x64 [i915]
[ 20.559845] [<c1002122>] do_one_initcall+0xd2/0x190
[ 20.559847] [<f8d3d000>] ? 0xf8d3cfff
[ 20.559850] [<c104cabf>] ? set_memory_nx+0x5f/0x70
[ 20.559853] [<c1653ed7>] ? set_section_ro_nx+0x54/0x59
[ 20.559856] [<c10c4b51>] load_module+0x1121/0x18e0
[ 20.559859] [<c10c5475>] SyS_finit_module+0x75/0xc0
[ 20.559862] [<c113b10b>] ? vm_mmap_pgoff+0x7b/0xa0
[ 20.559866] [<c166688d>] sysenter_do_call+0x12/0x12
[ 20.559867] ---[ end trace 46f6d7d7a29c5e79 ]---
[ 20.561121] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 20.561129] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 20.561130] [drm] Driver supports precise vblank timestamp query.
[ 20.561328] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 20.596135] systemd-udevd[302]: renamed network interface eth0 to eth6
[ 20.636515] type=1400 audit(1446755222.842:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=349 comm="apparmor_parser"
[ 20.636521] type=1400 audit(1446755222.842:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=349 comm="apparmor_parser"
[ 20.636525] type=1400 audit(1446755222.842:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=349 comm="apparmor_parser"
[ 20.636918] type=1400 audit(1446755222.842:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=349 comm="apparmor_parser"
[ 20.636922] type=1400 audit(1446755222.842:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=349 comm="apparmor_parser"
[ 20.637125] type=1400 audit(1446755222.842:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=349 comm="apparmor_parser"
[ 20.639922] type=1400 audit(1446755222.842:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=378 comm="apparmor_parser"
[ 20.693239] fbcon: inteldrmfb (fb0) is primary device
[ 20.756060] Console: switching to colour frame buffer device 160x64
[ 20.760243] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 20.760244] i915 0000:00:02.0: registered panic notifier
[ 20.760345] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20131115/video-1286)
[ 20.760348] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 20.760392] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 20.760443] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 20.760559] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 20.760931] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 20.806680] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[ 20.862828] kvm: disabled by bios
[ 20.977079] Linux video capture interface: v2.00
[ 20.991949] set resolution quirk: cval->res = 384
[ 20.993008] usbcore: registered new interface driver snd-usb-audio
[ 21.090172] gpio_ich: GPIO from 184 to 255 on gpio_ich
[ 21.100405] cfg80211: Calling CRDA to update world regulatory domain
[ 21.106525] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081d)
[ 21.118821] input: UVC Camera (046d:081d) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.2/input/input8
[ 21.118955] usbcore: registered new interface driver uvcvideo
[ 21.118957] USB Video Class driver (1.1.1)
[ 21.145085] autoconfig: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
[ 21.145088] speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
[ 21.145089] hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 21.145090] mono: mono_out=0x0
[ 21.145091] inputs:
[ 21.145092] Mic=0x14
[ 21.145093] Line=0x15
[ 21.152816] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 21.153186] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 21.153325] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 21.153465] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 21.200660] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 21.287548] cfg80211: World regulatory domain updated:
[ 21.287551] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.287553] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.287554] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.287556] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.287557] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.287558] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.339892] init: failsafe main process (675) killed by TERM signal
[ 21.356021] usb 1-2: reset high-speed USB device number 2 using ehci-pci
[ 21.469639] type=1400 audit(1446755223.674:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=733 comm="apparmor_parser"
[ 21.469646] type=1400 audit(1446755223.674:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=733 comm="apparmor_parser"
[ 21.470313] type=1400 audit(1446755223.674:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=733 comm="apparmor_parser"
[ 21.498617] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 21.526741] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[ 21.614969] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 21.615252] usbcore: registered new interface driver rt2800usb
[ 21.675216] Bluetooth: Core ver 2.17
[ 21.675233] NET: Registered protocol family 31
[ 21.675234] Bluetooth: HCI device and connection manager initialized
[ 21.675240] Bluetooth: HCI socket layer initialized
[ 21.675242] Bluetooth: L2CAP socket layer initialized
[ 21.675246] Bluetooth: SCO socket layer initialized
[ 21.697144] init: cups main process (739) killed by HUP signal
[ 21.697154] init: cups main process ended, respawning
[ 21.699656] Bluetooth: RFCOMM TTY layer initialized
[ 21.699662] Bluetooth: RFCOMM socket layer initialized
[ 21.699666] Bluetooth: RFCOMM ver 1.11
[ 21.739151] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.739154] Bluetooth: BNEP filters: protocol multicast
[ 21.739160] Bluetooth: BNEP socket layer initialized
[ 22.264167] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 22.355097] init: samba-ad-dc main process (800) terminated with status 1
[ 22.368058] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 22.368154] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 22.368449] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 22.370105] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 22.384555] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 22.625786] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.626262] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.856547] init: nvidia-prime main process (1015) terminated with status 127
[ 23.172732] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 23.175677] vboxdrv: Found 2 processor cores
[ 23.175797] vboxdrv: fAsync=0 offMin=0x1ee offMax=0x85a
[ 23.275871] vboxdrv: TSC mode is Synchronous, tentative frequency 3158711000 Hz
[ 23.275872] vboxdrv: Successfully loaded version 5.0.6 (interface 0x00240000)
[ 23.479739] VBoxNetFlt: Successfully started.
[ 23.481559] VBoxNetAdp: Successfully started.
[ 23.483939] VBoxPciLinuxInit
[ 23.488719] vboxpci: IOMMU not found (not registered)
[ 24.407337] init: plymouth-upstart-bridge main process ended, respawning
[ 24.418257] init: plymouth-upstart-bridge main process ended, respawning
[ 25.020666] wlan0: authenticate with 00:18:f6:64:a1:47
[ 25.048794] wlan0: send auth to 00:18:f6:64:a1:47 (try 1/3)
[ 25.050379] wlan0: authenticated
[ 25.052019] wlan0: associate with 00:18:f6:64:a1:47 (try 1/3)
[ 25.059376] wlan0: RX AssocResp from 00:18:f6:64:a1:47 (capab=0x411 status=0 aid=1)
[ 25.066247] wlan0: associated
[ 25.066267] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 25.285599] wlan0: deauthenticating from 00:18:f6:64:a1:47 by local choice (reason=2)
[ 25.310275] wlan0: authenticate with 00:18:f6:64:a1:47
[ 25.313422] wlan0: send auth to 00:18:f6:64:a1:47 (try 1/3)
[ 25.313753] cfg80211: Calling CRDA to update world regulatory domain
[ 25.315629] cfg80211: World regulatory domain updated:
[ 25.315631] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 25.315632] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.315634] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.315635] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.315637] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.315638] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.316000] wlan0: authenticated
[ 25.320023] wlan0: associate with 00:18:f6:64:a1:47 (try 1/3)
[ 25.322384] wlan0: RX AssocResp from 00:18:f6:64:a1:47 (capab=0x411 status=0 aid=1)
[ 25.329375] wlan0: associated
[ 51.521003] audit_printk_skb: 105 callbacks suppressed
[ 51.521006] type=1400 audit(1446755253.725:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1978 comm="apparmor_parser"
[ 51.521012] type=1400 audit(1446755253.725:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1978 comm="apparmor_parser"
[ 51.521405] type=1400 audit(1446755253.725:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1978 comm="apparmor_parser"
[ 110.656022] usb 1-6: new high-speed USB device number 5 using ehci-pci
[ 110.789728] usb 1-6: New USB device found, idVendor=0bc2, idProduct=ab28
[ 110.789732] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 110.789735] usb 1-6: Product: BUP BK
[ 110.789738] usb 1-6: Manufacturer: Seagate
[ 110.789740] usb 1-6: SerialNumber: NA7P0HDC
[ 110.790015] usb-storage 1-6:1.0: USB Mass Storage device detected
[ 110.790648] scsi7 : usb-storage 1-6:1.0
[ 111.788879] scsi 7:0:0:0: Direct-Access Seagate BUP BK 0304 PQ: 0 ANSI: 6
[ 111.789180] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 111.795048] sd 7:0:0:0: [sdd] Spinning up disk...
[ 112.796031] .....ready
[ 116.812617] sd 7:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
[ 116.812992] sd 7:0:0:0: [sdd] 7814037167 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 116.812996] sd 7:0:0:0: [sdd] 2048-byte physical blocks
[ 146.960026] usb 1-6: reset high-speed USB device number 5 using ehci-pci
[ 162.072024] usb 1-6: device descriptor read/64, error -110
[ 177.288022] usb 1-6: device descriptor read/64, error -110
[ 177.504023] usb 1-6: reset high-speed USB device number 5 using ehci-pci
[ 192.616021] usb 1-6: device descriptor read/64, error -110
[ 207.832035] usb 1-6: device descriptor read/64, error -110
[ 208.048021] usb 1-6: reset high-speed USB device number 5 using ehci-pci
[ 218.456026] usb 1-6: device not accepting address 5, error -110
[ 218.568024] usb 1-6: reset high-speed USB device number 5 using ehci-pci
[ 228.976036] usb 1-6: device not accepting address 5, error -110
[ 228.976094] sd 7:0:0:0: Device offlined - not ready after error recovery
[ 228.976095] usb 1-6: USB disconnect, device number 5
[ 228.976116] sd 7:0:0:0: [sdd] Write Protect is off
[ 228.976119] sd 7:0:0:0: [sdd] Mode Sense: 00 00 00 00
[ 228.976127] sd 7:0:0:0: rejecting I/O to offline device
[ 228.976132] sd 7:0:0:0: [sdd] Asking for cache data failed
[ 228.976135] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 228.976357] sd 7:0:0:0: [sdd] READ CAPACITY failed
[ 228.976360] sd 7:0:0:0: [sdd]
[ 228.976362] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 228.976363] sd 7:0:0:0: [sdd] Sense not available.
[ 228.976380] sd 7:0:0:0: [sdd] Asking for cache data failed
[ 228.976382] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 228.976385] sdd: detected capacity change from 4000787029504 to 0
[ 228.976443] sd 7:0:0:0: [sdd] READ CAPACITY failed
[ 228.976445] sd 7:0:0:0: [sdd]
[ 228.976446] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 228.976448] sd 7:0:0:0: [sdd] Sense not available.
[ 228.976464] sd 7:0:0:0: [sdd] Asking for cache data failed
[ 228.976465] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 228.976467] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 229.092021] usb 1-6: new high-speed USB device number 6 using ehci-pci
[ 252.776025] usb 2-5: new high-speed USB device number 3 using ehci-pci
[ 252.909956] usb 2-5: New USB device found, idVendor=0bc2, idProduct=ab28
[ 252.909959] usb 2-5: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 252.909962] usb 2-5: Product: BUP BK
[ 252.909965] usb 2-5: Manufacturer: Seagate
[ 252.909967] usb 2-5: SerialNumber: NA7P0HDC
[ 252.910244] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 252.910874] scsi8 : usb-storage 2-5:1.0
[ 253.908866] scsi 8:0:0:0: Direct-Access Seagate BUP BK 0304 PQ: 0 ANSI: 6
[ 253.909088] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 253.913220] sd 8:0:0:0: [sdd] Spinning up disk...
[ 254.916019] .....ready
[ 258.932596] sd 8:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
[ 258.932971] sd 8:0:0:0: [sdd] 7814037167 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 258.932975] sd 8:0:0:0: [sdd] 2048-byte physical blocks
More information about the Lubuntu-users
mailing list