ThinkPad R40: from Hoary to Breezy
Benjamí Villoslada
benjami at gmail.com
Mon Dec 12 14:34:49 GMT 2005
After the laptop update the sound doesn't works:
$ lspci | grep -i multimedia
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
in one ThinkPad R40 HSG2681 (P4 @ 2 GHz)
Is one bug (#15585 and #17858) and this is the solution:
http://bugzilla.ubuntu.com/show_bug.cgi?id=17858#c5
http://bugzilla.ubuntu.com/show_bug.cgi?id=15585#c4
Now all works fine except ACPI_SLEEP: when the system wake up, after 30-40
seconds the hard disk goes on (LED and activity).
The CPU doesn't hangs: I can use programs that dont need hard disk. But
worried with the intensive disk activity (or failure) I always quickly power
off the laptop. I can't see disk errors in /var/log/ files. Well, only one
time I've seen disk errors in /var/log/syslog with a less, but after the
power off this records are missing --the disk doensn't works and doesn't
writes; are important? ... I avoid this disk stress :)
ACPI_SLEEP doesn't worked with Hoary too.
ACPI_HIBERNATE works fine.
-----------------------------------------------------------------
Details:
$ sudo lspci -vv
[snip]
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage
Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: IBM: Unknown device 052d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 1860 [size=16]
Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility
M7 LW [Radeon Mobility 7500] (prog-if 00 [VGA])
Subsystem: IBM: Unknown device 0527
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW-
Rate=x1
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
$ sudo hdparm -iI /dev/hda
/dev/hda:
Model=HITACHI_DK23EA-40B, FwRev=00K3A0B6, SerialNo=E55525
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=71898101
IORDY=yes, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3:
* signifies the current active mode
ATA device, with non-removable media
Model Number: HITACHI_DK23EA-40B
Serial Number: E55525
Firmware Revision: 00K3A0B6
Standards:
Used: ATA/ATAPI-5 T13 1321D revision 3
Supported: 5 4 3 2 & some of 6
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 78140160
device size with M = 1024*1024: 38154 MBytes
device size with M = 1000*1000: 40007 MBytes (40 GB)
Capabilities:
LBA, IORDY(cannot be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = ?
Advanced power management level: 128 (0x80)
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* Mandatory FLUSH CACHE command
* Device Configuration Overlay feature set
SET MAX security extension
Address Offset Reserved Area Boot
* Advanced Power Management feature set
* SMART self-test
* SMART error logging
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
40min for SECURITY ERASE UNIT. 40min for ENHANCED SECURITY ERASE UNIT.
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
-----------------------------------------------------------------
Regards,
--
Benjamí
http://weblog.bitassa.net
.
More information about the laptop-testing-team
mailing list