[ 0.000000] Linux version 2.6.22-14-386 (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 Sun Oct 14 22:36:54 GMT 2007 (Ubuntu 2.6.22-14.46-386) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f41b0 [ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261872 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261872 [ 0.000000] On node 0 totalpages: 261872 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32243 pages, LIFO batch:7 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F8020 checksum 0 [ 0.000000] ACPI: RSDP 000F8020, 0014 (r0 RS480 ) [ 0.000000] ACPI: RSDT 3FEF3040, 0034 (r1 RS480 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 RS480 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FEF3180, 4167 (r1 RS480 AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FEF0000, 0040 [ 0.000000] ACPI: SSDT 3FEF7400, 00D6 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: MCFG 3FEF7540, 003C (r1 RS480 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 3FEF7340, 0068 (r1 RS480 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:15 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000) [ 0.000000] Built 1 zonelists. Total pages: 259827 [ 0.000000] Kernel command line: root=UUID=298b4167-cb8e-4399-98c2-3417f609a8a2 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2000.019 MHz processor. [ 27.101554] Console: colour VGA+ 80x25 [ 27.101878] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 27.102238] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 27.118202] Memory: 1027136k/1047488k available (1929k kernel code, 19608k reserved, 877k data, 348k init, 129984k highmem) [ 27.118212] virtual kernel memory layout: [ 27.118213] fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB) [ 27.118214] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 27.118215] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 27.118216] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 27.118217] .init : 0xc03c0000 - 0xc0417000 ( 348 kB) [ 27.118219] .data : 0xc02e25d5 - 0xc03bda04 ( 877 kB) [ 27.118220] .text : 0xc0100000 - 0xc02e25d5 (1929 kB) [ 27.118222] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 27.118262] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 27.198125] Calibrating delay using timer specific routine.. 4003.51 BogoMIPS (lpj=8007036) [ 27.198146] Security Framework v1.0.0 initialized [ 27.198152] SELinux: Disabled at boot. [ 27.198157] Mount-cache hash table entries: 512 [ 27.198238] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 [ 27.198244] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 27.198247] CPU: L2 Cache: 512K (64 bytes/line) [ 27.198249] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 [ 27.198257] Compat vDSO mapped to ffffe000. [ 27.198264] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 02 [ 27.198269] Checking 'hlt' instruction... OK. [ 27.214535] Early unpacking initramfs... done [ 27.497903] ACPI: Core revision 20070126 [ 27.497952] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 27.508749] ENABLING IO-APIC IRQs [ 27.509008] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 27.548665] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 27.548720] ...trying to set up timer (IRQ0) through the 8259A ... failed. [ 27.548723] ...trying to set up timer as Virtual Wire IRQ... works. [ 27.693197] Booting paravirtualized kernel on bare hardware [ 27.693264] Time: 19:17:02 Date: 01/23/108 [ 27.693280] NET: Registered protocol family 16 [ 27.693335] EISA bus registered [ 27.693348] ACPI: bus type pci registered [ 27.725659] PCI: PCI BIOS revision 3.00 entry at 0xfab00, last bus=2 [ 27.725661] PCI: Using configuration type 1 [ 27.725662] Setting up standard PCI resources [ 27.728175] ACPI: EC: Look up EC in DSDT [ 27.738475] ACPI: Interpreter enabled [ 27.738479] ACPI: (supports S0 S3 S4 S5) [ 27.738492] ACPI: Using IOAPIC for interrupt routing [ 27.742243] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 27.742248] PCI: Probing PCI hardware (bus 00) [ 27.743420] PCI: Transparent bridge - 0000:00:14.4 [ 27.743451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 27.743600] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 27.758105] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 27.758183] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 27.758258] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 27.758332] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 27.758406] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 27.758480] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11) [ 27.758554] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11) [ 27.758628] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11) [ 27.758685] Linux Plug and Play Support v0.97 (c) Adam Belay [ 27.758694] pnp: PnP ACPI init [ 27.758699] ACPI: bus type pnp registered [ 27.761073] pnp: PnP ACPI: found 15 devices [ 27.761075] ACPI: ACPI bus type pnp unregistered [ 27.761078] PnPBIOS: Disabled by ACPI PNP [ 27.761107] PCI: Using ACPI for IRQ routing [ 27.761110] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 27.813396] NET: Registered protocol family 8 [ 27.813398] NET: Registered protocol family 20 [ 27.813433] pnp: 00:01: ioport range 0x140-0x15f has been reserved [ 27.813436] pnp: 00:01: ioport range 0x228-0x22f has been reserved [ 27.813438] pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved [ 27.813441] pnp: 00:01: ioport range 0xc00-0xc01 has been reserved [ 27.813443] pnp: 00:01: ioport range 0xc14-0xc14 has been reserved [ 27.813445] pnp: 00:01: ioport range 0xc50-0xc52 has been reserved [ 27.813448] pnp: 00:01: ioport range 0xc6c-0xc6d has been reserved [ 27.813450] pnp: 00:01: ioport range 0xc6f-0xc6f has been reserved [ 27.813458] pnp: 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved [ 27.813462] pnp: 00:0e: iomem range 0xf0000-0xf3fff could not be reserved [ 27.813465] pnp: 00:0e: iomem range 0xf4000-0xf7fff could not be reserved [ 27.813468] pnp: 00:0e: iomem range 0xf8000-0xfbfff could not be reserved [ 27.813470] pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved [ 27.816897] Time: tsc clocksource has been installed. [ 27.843588] PCI: Bridge: 0000:00:02.0 [ 27.843590] IO window: e000-efff [ 27.843593] MEM window: f8000000-fbffffff [ 27.843595] PREFETCH window: d0000000-dfffffff [ 27.843598] PCI: Bridge: 0000:00:14.4 [ 27.843601] IO window: d000-dfff [ 27.843607] MEM window: fdd00000-fddfffff [ 27.843612] PREFETCH window: fde00000-fdefffff [ 27.843624] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 27.843639] NET: Registered protocol family 2 [ 27.880784] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 27.880879] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 27.881559] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 27.881727] TCP: Hash tables configured (established 131072 bind 65536) [ 27.881729] TCP reno registered [ 27.892843] checking if image is initramfs... it is [ 28.343854] Switched to high resolution mode on CPU 0 [ 28.448057] Freeing initrd memory: 7054k freed [ 28.448306] audit: initializing netlink socket (disabled) [ 28.448317] audit(1203794222.180:1): initialized [ 28.448354] highmem bounce pool size: 64 pages [ 28.449486] VFS: Disk quotas dquot_6.5.1 [ 28.449496] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 28.449555] io scheduler noop registered [ 28.449557] io scheduler anticipatory registered [ 28.449559] io scheduler deadline registered [ 28.449571] io scheduler cfq registered (default) [ 28.449576] PCI: MSI quirk detected. MSI deactivated. [ 28.503512] Boot video device is 0000:01:00.0 [ 28.503562] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 28.503579] assign_interrupt_mode Found MSI capability [ 28.503582] Allocate Port Service[0000:00:02.0:pcie00] [ 28.503662] isapnp: Scanning for PnP cards... [ 28.857476] isapnp: No Plug & Play device found [ 28.873537] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 28.873659] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 28.873824] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 28.874260] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 28.874483] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 28.874927] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 28.875059] input: Macintosh mouse button emulation as /class/input/input0 [ 28.875105] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 28.877681] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 28.877684] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 28.877783] mice: PS/2 mouse device common for all mice [ 28.877848] EISA: Probing bus 0 at eisa.0 [ 28.877869] Cannot allocate resource for EISA slot 4 [ 28.877888] EISA: Detected 0 cards. [ 28.877957] TCP cubic registered [ 28.877966] NET: Registered protocol family 1 [ 28.877982] Using IPI Shortcut mode [ 28.878107] Magic number: 12:438:294 [ 28.878111] hash matches device hpet [ 28.878127] hash matches device ttyz8 [ 28.878135] hash matches device ttywb [ 28.878206] hash matches device tty27 [ 28.878421] Freeing unused kernel memory: 348k freed [ 28.955233] input: AT Translated Set 2 keyboard as /class/input/input1 [ 30.067701] AppArmor: AppArmor initialized<5>audit(1203794223.800:2): type=1505 info="AppArmor initialized" pid=1199 [ 30.073124] fuse init (API version 7.8) [ 30.077069] Failure registering capabilities with primary security module. [ 30.087739] ACPI: Fan [FAN] (on) [ 30.093603] ACPI: Thermal Zone [THRM] (40 C) [ 30.542842] SCSI subsystem initialized [ 30.546479] libata version 2.21 loaded. [ 30.548646] sata_sil 0000:00:11.0: version 2.2 [ 30.548690] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 16 [ 30.548762] scsi0 : sata_sil [ 30.548791] scsi1 : sata_sil [ 30.548811] ata1: SATA max UDMA/100 cmd 0xf883c080 ctl 0xf883c08a bmdma 0xf883c000 irq 16 [ 30.548815] ata2: SATA max UDMA/100 cmd 0xf883c0c0 ctl 0xf883c0ca bmdma 0xf883c008 irq 16 [ 30.573728] usbcore: registered new interface driver usbfs [ 30.573746] usbcore: registered new interface driver hub [ 30.573760] usbcore: registered new device driver usb [ 30.574259] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 30.660806] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 30.660811] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 30.723234] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 30.834955] Floppy drive(s): fd0 is 1.44M [ 30.854626] FDC 0 is a post-1991 82077 [ 30.858795] ata1: SATA link down (SStatus 0 SControl 300) [ 31.170156] ata2: SATA link down (SStatus 0 SControl 300) [ 31.170224] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17 [ 31.170271] scsi2 : sata_sil [ 31.170307] scsi3 : sata_sil [ 31.170327] ata3: SATA max UDMA/100 cmd 0xf8874080 ctl 0xf887408a bmdma 0xf8874000 irq 17 [ 31.170332] ata4: SATA max UDMA/100 cmd 0xf88740c0 ctl 0xf88740ca bmdma 0xf8874008 irq 17 [ 31.481531] ata3: SATA link down (SStatus 0 SControl 300) [ 31.792907] ata4: SATA link down (SStatus 0 SControl 300) [ 31.793013] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 31.793024] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 31.793273] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 31.793294] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02d000 [ 31.853047] usb usb1: configuration #1 chosen from 1 choice [ 31.853143] hub 1-0:1.0: USB hub found [ 31.853154] hub 1-0:1.0: 4 ports detected [ 31.956855] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18 [ 31.956868] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 31.956961] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 31.956976] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02c000 [ 32.016654] usb usb2: configuration #1 chosen from 1 choice [ 32.016757] hub 2-0:1.0: USB hub found [ 32.016767] hub 2-0:1.0: 4 ports detected [ 32.120569] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18 [ 32.120580] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 32.120683] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 32.120731] ehci_hcd 0000:00:13.2: irq 18, io mem 0xfe02b000 [ 32.259967] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 32.259988] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 32.260110] usb usb3: configuration #1 chosen from 1 choice [ 32.260129] hub 3-0:1.0: USB hub found [ 32.260135] hub 3-0:1.0: 8 ports detected [ 32.363875] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 32.363898] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19 [ 32.363908] ATIIXP: chipset revision 0 [ 32.363909] ATIIXP: not 100% native mode: will probe irqs later [ 32.363918] ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:pio, hdb:pio [ 32.363931] ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:pio, hdd:pio [ 32.363939] Probing IDE interface ide0... [ 32.651601] hda: ST3200822A, ATA DISK drive [ 32.942598] usb 3-1: new high speed USB device using ehci_hcd and address 2 [ 33.076953] usb 3-1: configuration #1 chosen from 1 choice [ 33.321852] hda: selected mode 0x45 [ 33.322442] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 33.327050] Probing IDE interface ide1... [ 33.553377] usb 3-8: new high speed USB device using ehci_hcd and address 4 [ 33.689154] usb 3-8: configuration #1 chosen from 1 choice [ 33.690771] usbcore: registered new interface driver libusual [ 33.694801] Initializing USB Mass Storage driver... [ 33.992492] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 34.060774] hdc: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive [ 34.219966] usb 2-1: configuration #1 chosen from 1 choice [ 34.222540] scsi4 : SCSI emulation for USB Mass Storage devices [ 34.222573] usb-storage: device found at 2 [ 34.222575] usb-storage: waiting for device to settle before scanning [ 34.222598] scsi5 : SCSI emulation for USB Mass Storage devices [ 34.222621] usb-storage: device found at 4 [ 34.222622] usb-storage: waiting for device to settle before scanning [ 34.222634] usbcore: registered new interface driver usb-storage [ 34.222636] USB Mass Storage support registered. [ 34.395698] hdc: selected mode 0x42 [ 34.396176] ide1 at 0x170-0x177,0x376 on irq 15 [ 34.399158] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 17 [ 34.451853] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[fddff000-fddff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 34.459051] 8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 34.459054] 8139cp 0000:02:05.0: Try the "8139too" driver instead. [ 34.460395] 8139too Fast Ethernet driver 0.9.28 [ 34.460433] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 17 [ 34.461070] eth0: RealTek RTL8139 at 0xf8850000, 00:14:2a:92:c8:b2, IRQ 17 [ 34.461072] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 34.467583] hda: max request size: 512KiB [ 34.473264] hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) [ 34.473699] hda: cache flushes supported [ 34.473733] hda: hda1 hda2 hda3 hda4 [ 34.517880] hdc: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33) [ 34.517887] Uniform CD-ROM driver Revision: 3.20 [ 34.791568] Attempting manual resume [ 34.791572] swsusp: Resume From Partition 3:4 [ 34.791573] PM: Checking swsusp image. [ 34.791795] PM: Resume from disk failed. [ 34.810011] kjournald starting. Commit interval 5 seconds [ 34.810019] EXT3-fs: mounted filesystem with ordered data mode. [ 35.725102] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106000001a3e0] [ 39.210285] usb-storage: device scan complete [ 39.210503] usb-storage: device scan complete [ 39.211931] scsi 5:0:0:0: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 39.212372] scsi 4:0:0:0: CD-ROM BENQ DVD DD EW162I 47L9 PQ: 0 ANSI: 0 [ 39.213030] scsi 5:0:0:1: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 39.214054] scsi 5:0:0:2: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 39.216458] scsi 5:0:0:3: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0 [ 40.030267] Linux agpgart interface v0.102 (c) Dave Jones [ 40.194457] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 40.298271] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 40.436717] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 40.882988] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904 [ 40.882999] usbcore: registered new interface driver usblp [ 40.883002] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 41.051938] Real Time Clock Driver v1.12ac [ 41.268030] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 41.268085] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 41.271853] input: PC Speaker as /class/input/input2 [ 41.668129] sd 5:0:0:0: [sda] Attached SCSI removable disk [ 41.673584] sd 5:0:0:1: [sdb] Attached SCSI removable disk [ 41.686757] sr 4:0:0:0: Attached scsi generic sg0 type 5 [ 41.686780] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 41.686800] sd 5:0:0:1: Attached scsi generic sg2 type 0 [ 41.686821] sd 5:0:0:2: Attached scsi generic sg3 type 0 [ 41.686841] scsi 5:0:0:3: Attached scsi generic sg4 type 0 [ 41.726286] sd 5:0:0:2: [sdc] Attached SCSI removable disk [ 41.735699] sd 5:0:0:3: [sdd] Attached SCSI removable disk [ 41.795957] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 [ 41.799897] parport_pc 00:0a: reported by Plug and Play ACPI [ 41.799969] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 41.825631] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 42.173496] ieee80211_init: failed to initialize WME (err=-17) [ 42.177679] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_unregister [ 42.177714] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put [ 42.177744] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get [ 42.177789] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_register [ 42.178086] wmaster0: Selected rate control algorithm 'simple' [ 42.297658] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 20 [ 42.744169] lp0: using parport0 (interrupt-driven). [ 42.802210] Adding 3903784k swap on /dev/hda4. Priority:-1 extents:1 across:3903784k [ 43.205647] EXT3 FS on hda2, internal journal [ 59.194601] input: Power Button (FF) as /class/input/input4 [ 59.198139] ACPI: Power Button (FF) [PWRF] [ 59.227040] input: Power Button (CM) as /class/input/input5 [ 59.230551] ACPI: Power Button (CM) [PWRB] [ 59.275093] No dock devices found. [ 59.508437] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00) [ 59.508465] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 [ 59.508468] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 [ 59.508470] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 60.888503] ppdev: user-space parallel port driver [ 61.032647] audit(1203790655.403:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4738 profile="/usr/sbin/cupsd" [ 61.223348] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 61.223352] apm: overridden by ACPI. [ 62.448813] Failure registering capabilities with primary security module. [ 62.614596] Bluetooth: Core ver 2.11 [ 62.614856] NET: Registered protocol family 31 [ 62.614858] Bluetooth: HCI device and connection manager initialized [ 62.614861] Bluetooth: HCI socket layer initialized [ 62.622809] Bluetooth: L2CAP ver 2.8 [ 62.622813] Bluetooth: L2CAP socket layer initialized [ 62.679073] Bluetooth: RFCOMM socket layer initialized [ 62.679335] Bluetooth: RFCOMM TTY layer initialized [ 62.679338] Bluetooth: RFCOMM ver 1.8 [ 35.616000] Marking TSC unstable due to: cpufreq changes. [ 35.620000] Time: acpi_pm clocksource has been installed. [ 37.076000] Clocksource tsc unstable (delta = -138044817 ns)