From cbell44 at cfl.rr.com Wed Mar 1 04:30:09 2017 From: cbell44 at cfl.rr.com (Charles T. Bell) Date: Tue, 28 Feb 2017 23:30:09 -0500 Subject: kmail doesn't show email or headers In-Reply-To: References: <51180eff-d154-a490-7892-d620535a2e03@cfl.rr.com> Message-ID: On 02/28/2017 01:18 PM, Michael Hirsch wrote: > On Tue, Feb 28, 2017 at 5:42 AM, Charles T. Bell wrote: >> >> >> On 02/27/2017 12:49 PM, Michael Hirsch wrote: >>> FYI, here is a screenshot of his kmail window >>> >>> >>> Michael >>> >>> On Mon, Feb 27, 2017 at 10:45 AM, Michael Hirsch >> > wrote: >>> >>> My dad called me this morning in a panic with this problem and I was >>> unable to help him. I hope someone here knows the answer. >>> >>> He uses kontact and kmail for his email, and has for around 15 years. >>> I'm pretty sure he's running 16.04, the latest LTS Kubuntu. >>> >>> He has many mail folders, which he can see fine in kmail. But >>> clicking on one does not display the contents at all. Neither the >>> headers nor any contents display. >>> >>> He usually has a 3 panel view with the folders down the left side, the >>> headers at the top of the right side, and the message contents at the >>> bottom of the right side. The panels should have panel dividers in >>> between the panels. >>> >>> Now he has only the folders. Only the single panel with no panel >>> dividers. >>> >>> Any ideas for where the missing panels are? >>> >>> I've been trying to find the place that kmail keeps it's settings for >>> the panel dividers' locations. If I can reset them then I hope they >>> will show up. >>> >>> Where can I find the values of the dividers? >>> >>> Thanks, >>> >>> Michael >>> >>> >>> >>> >> Did you have him check the "Settings" menu? >> Then click "Configure Kmail..."? >> Then click "Appearance"? >> Then click "Layout"? >> Make sure that "Show the message preview pane below the message list"? > > Yes, we tried that. Since he doesn't even have the message list it is > something else going on. > > In the past he has managed to drag the separator between the folder > and the messages so far to the left that the folder were not visible. > I hoped for something like that here, but haven't found it. My kmail > no longer lets me drag the separator that far over. > > I still can't find where the UI configuration is stored. I've tried > dragging my panel separator, then looking for changed files and can't > find one that seems to hold that data. > > Where is the kmail UI configuration saved? > > Michael > I would say to use "locate kmailrc" command on the commandline and select the line that starts with "/usr/share/kubuntu-default-settings/" I don't know how much longer the line will be, but however long you can find one version of kmailrc there. Good luck! Tom Bell -- The thing about quotes on the internet is you cannot confirm their validity. ~Abraham Lincoln -------------- next part -------------- A non-text attachment was scrubbed... Name: cbell44.vcf Type: text/x-vcard Size: 149 bytes Desc: not available URL: From clay at claydoh.com Wed Mar 1 17:09:24 2017 From: clay at claydoh.com (Clay Weber) Date: Wed, 01 Mar 2017 12:09:24 -0500 Subject: kmail doesn't show email or headers Message-ID: Actually the user's kmailrc will be in ~/.config or possibly ~/.local/share . the local user config takes precedence over any system wide default settings. Clay Weber ------ Original message------From: Charles T. BellDate: Tue, Feb 28, 2017 11:30 PMTo: kubuntu-users at lists.ubuntu.com;Cc: Subject:Re: kmail doesn't show email or headers On 02/28/2017 01:18 PM, Michael Hirsch wrote:> On Tue, Feb 28, 2017 at 5:42 AM, Charles T. Bell wrote:>>>>>> On 02/27/2017 12:49 PM, Michael Hirsch wrote:>>> FYI, here is a screenshot of his kmail window>>>>>>>>> Michael>>>>>> On Mon, Feb 27, 2017 at 10:45 AM, Michael Hirsch >> > wrote:>>>>>> My dad called me this morning in a panic with this problem and I was>>> unable to help him. I hope someone here knows the answer.>>>>>> He uses kontact and kmail for his email, and has for around 15 years.>>> I'm pretty sure he's running 16.04, the latest LTS Kubuntu.>>>>>> He has many mail folders, which he can see fine in kmail. But>>> clicking on one does not display the contents at all. Neither the>>> headers nor any contents display.>>>>>> He usually has a 3 panel view with the folders down the left side, the>>> headers at the top of the right side, and the message contents at the>>> bottom of the right side. The panels should have panel dividers in>>> between the panels.>>>>>> Now he has only the folders. Only the single panel with no panel>>> dividers.>>>>>> Any ideas for where the missing panels are?>>>>>> I've been trying to find the place that kmail keeps it's settings for>>> the panel dividers' locations. If I can reset them then I hope they>>> will show up.>>>>>> Where can I find the values of the dividers?>>>>>> Thanks,>>>>>> Michael>>>>>>>>>>>>>> Did you have him check the "Settings" menu?>> Then click "Configure Kmail..."?>> Then click "Appearance"?>> Then click "Layout"?>> Make sure that "Show the message preview pane below the message list"?> > Yes, we tried that. Since he doesn't even have the message list it is> something else going on.> > In the past he has managed to drag the separator between the folder> and the messages so far to the left that the folder were not visible.> I hoped for something like that here, but haven't found it. My kmail> no longer lets me drag the separator that far over.> > I still can't find where the UI configuration is stored. I've tried> dragging my panel separator, then looking for changed files and can't> find one that seems to hold that data.> > Where is the kmail UI configuration saved?> > Michael> I would say to use "locate kmailrc" command on the commandline andselect the line that starts with "/usr/share/kubuntu-default-settings/"I don't know how much longer the line will be, but however long you canfind one version of kmailrc there.Good luck!Tom Bell-- The thing about quotes on the internet is youcannot confirm their validity. ~Abraham Lincoln-- kubuntu-users mailing listkubuntu-users at lists.ubuntu.comModify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/kubuntu-users -------------- next part -------------- An HTML attachment was scrubbed... URL: From cbell44 at cfl.rr.com Wed Mar 1 23:14:11 2017 From: cbell44 at cfl.rr.com (Charles T. Bell) Date: Wed, 1 Mar 2017 18:14:11 -0500 Subject: kmail doesn't show email or headers In-Reply-To: References: Message-ID: <6e5385dc-9312-14d2-8f8d-f3b19cefd325@cfl.rr.com> On 03/01/2017 12:09 PM, Clay Weber wrote: > > Actually the user's kmailrc will be in ~/.config or possibly > ~/.local/share . the local user config takes precedence over any system > wide default settings. > > Clay Weber > > ------ Original message------ > *From: *Charles T. Bell > *Date: *Tue, Feb 28, 2017 11:30 PM > *To: *kubuntu-users at lists.ubuntu.com > ; > *Cc: * > *Subject:*Re: kmail doesn't show email or headers > > On 02/28/2017 01:18 PM, Michael Hirsch wrote:> On Tue, Feb 28, 2017 at 5:42 AM, Charles T. Bell wrote:>>>>>> On 02/27/2017 12:49 PM, Michael Hirsch wrote:>>> FYI, here > is a screenshot of his kmail window>>>>>>>>> Michael>>>>>> On Mon, Feb > 27, 2017 at 10:45 AM, Michael Hirsch >> > wrote:>>>>>> My dad called me > this morning in a panic with this problem and I was>>> unable to help > him. I hope someone here knows the answer.>>>>>> He uses kontact and > kmail for his email, and has for around 15 years.>>> I'm pretty sure > he's running 16.04, the latest LTS Kubuntu.>>>>>> He has many mail > folders, which he can see fine in kmail. But>>> clicking on one does not > display the contents at all. Neither the>>> headers nor any contents > display.>>>>>> He usually has a 3 panel view with the folders down the > left side, the>>> headers at the top of the right side, and the message > contents at the>>> bottom of the right side. The panels should have > panel dividers in>>> between the panels.>>>>>> Now he has only the > folders. Only the single panel with no panel>>> dividers.>>>>>> Any > ideas for where the missing panels are?>>>>>> I've been trying to find > the place that kmail keeps it's settings for>>> the panel dividers' > locations. If I can reset them then I hope they>>> will show up.>>>>>> > Where can I find the values of the dividers?>>>>>> Thanks,>>>>>> > Michael>>>>>>>>>>>>>> Did you have him check the "Settings" menu?>> Then > click "Configure Kmail..."?>> Then click "Appearance"?>> Then click > "Layout"?>> Make sure that "Show the message preview pane below the > message list"?> > Yes, we tried that. Since he doesn't even have the > message list it is> something else going on.> > In the past he has > managed to drag the separator between the folder> and the messages so > far to the left that the folder were not visible.> I hoped for something > like that here, but haven't found it. My kmail> no longer lets me drag > the separator that far over.> > I still can't find where the UI > configuration is stored. I've tried> dragging my panel separator, then > looking for changed files and can't> find one that seems to hold that > data.> > Where is the kmail UI configuration saved?> > Michael> I would > say to use "locate kmailrc" command on the commandline andselect the > line that starts with "/usr/share/kubuntu-default-settings/"I don't know > how much longer the line will be, but however long you canfind one > version of kmailrc there.Good luck!Tom Bell-- The thing about quotes on > the internet is youcannot confirm their validity. ~Abraham Lincoln-- > kubuntu-users mailinglistkubuntu-users at lists.ubuntu.comMod listkubuntu-users at lists.ubuntu.comMod>ify settings or unsubscribe at: > https://lists.ubuntu.com/mailman/listinfo/kubuntu-users > > > Actually, I found the kmailrc at three locations and only one had more lines than one in it. The following: [Geometry] ColumnOrder=0 ColumnWidths=246 TotalColumn=-1 UnreadColumn=-1 [TipOfDay] RunOnStart=false [Reader] htmlMail=true ...was found in the one that started with, "/usr/share/kubuntu-default-settings/". I am not an expert, I just know what I found to exist. Good luck! Tom Bell -- The thing about quotes on the internet is you cannot confirm their validity. ~Abraham Lincoln -------------- next part -------------- A non-text attachment was scrubbed... Name: cbell44.vcf Type: text/x-vcard Size: 149 bytes Desc: not available URL: From basroufs at gmail.com Tue Mar 7 15:54:57 2017 From: basroufs at gmail.com (Bas G. Roufs -in 't Nederlands) Date: Tue, 07 Mar 2017 16:54:57 +0100 Subject: Kontact crashes often when trying to select an addressee via the address book, for a mail sent via Kmail. Message-ID: <1529781.YVBNvKyVHp@viaconsensus> Hello Everybody. Today, Tuesday 7 March 2017, I have submitted bug nr. 377338 at bugs.kde.org: Kontact crashes often when trying to select an addressee via the address book, for a mail sent via Kmail. Please, check the details here: https://bugs.kde.org/show_bug.cgi?id=377338 I need to restart and retry several times before I can pick an address from there and send the mail. In the bug report, you can find three .txt files. Each file is a report generated by the command line, after starting Kmail from there. By doing so, I try to provide you with info from three crashes that have happened today, 7 March 2017. However it may be I have been stumbling on this problem already a few months. Can you help me to fix the problem or at least to find some reasonable workaround? Yours. Bas G. Roufs. ABOUT THE SYSTEM ================= OS: Kubuntu 16.04 LTS, fresh install. KDE Plasma version: 5.8.5. (installed via the backports ppa). QT Version - 5.6.1. Kernel version: 4.4.0.65-generic. OS-Type: 64 bits. Processors: 4 x Intel® Core ™ i5-2540M CPU @ 2.60 Ghz. Memory: 7.7 GiB of RAM Computer: Lenovo Thinkpad X220. -- Bas G. Roufs Van 't Hoffstraat 1 NL- 3514 VT Utrecht BasRoufs at gmail.com +31 6 446 835 10 From stefansuurmeijer at gmail.com Fri Mar 17 23:32:51 2017 From: stefansuurmeijer at gmail.com (Stefan Suurmeijer) Date: Sat, 18 Mar 2017 00:32:51 +0100 Subject: Startup scripts not running on 16.10 Message-ID: Hi all, I just upgraded to 16.10. Now I find some (not all) startup scripts are not executed on a reboot. Specifically for me, Samba (smbd/nmbd) and arno-iptables-firewall. I haven't found an obvious reason yet, still looking. Anyone else see this behavior or know where to look? Thanks in advance, Stefan -------------- next part -------------- An HTML attachment was scrubbed... URL: From leroy_tennison at prodigy.net Sat Mar 18 04:58:49 2017 From: leroy_tennison at prodigy.net (Leroy Tennison) Date: Fri, 17 Mar 2017 23:58:49 -0500 Subject: Startup scripts not running on 16.10 In-Reply-To: References: Message-ID: On 03/17/2017 06:32 PM, Stefan Suurmeijer wrote: > Hi all, > > I just upgraded to 16.10. Now I find some (not all) startup scripts are not > executed on a reboot. Specifically for me, Samba (smbd/nmbd) and > arno-iptables-firewall. I haven't found an obvious reason yet, still looking. > Anyone else see this behavior or know where to look? > > Thanks in advance, > Stefan > > > You didn't say what you upgraded from so this suggestion may be N/A, have you checked systemd? 'systemctl list-unit-files', are these scripts enabled? -------------- next part -------------- An HTML attachment was scrubbed... URL: From robert.leleu at ovh.fr Sat Mar 18 20:49:11 2017 From: robert.leleu at ovh.fr (leleu) Date: Sat, 18 Mar 2017 21:49:11 +0100 Subject: Startup scripts not running on 16.10 In-Reply-To: References: Message-ID: Je la 18/03/2017 00:32, Stefan Suurmeijer skribis : > Hi all, > > I just upgraded to 16.10. Now I find some (not all) startup scripts > are not executed on a reboot. Specifically for me, Samba (smbd/nmbd) > and arno-iptables-firewall. I haven't found an obvious reason yet, > still looking. Anyone else see this behavior or know where to look? > > Thanks in advance, > Stefan Have you checked what appears in the menu Outils système> Préférences>Applications au démarrage ?? (this French menu opens gnome-session-properties ) I remember that I had to modify seme entries when I switched to ubuntu 16.10. From stefansuurmeijer at gmail.com Sun Mar 19 00:18:38 2017 From: stefansuurmeijer at gmail.com (Stefan Suurmeijer) Date: Sun, 19 Mar 2017 01:18:38 +0100 Subject: kubuntu-users Digest, Vol 146, Issue 4 In-Reply-To: References: Message-ID: On 03/17/2017 06:32 PM, Stefan Suurmeijer wrote: >> Hi all, >> >> I just upgraded to 16.10. Now I find some (not all) startup scripts are not >> executed on a reboot. Specifically for me, Samba (smbd/nmbd) and >> arno-iptables-firewall. I haven't found an obvious reason yet, still looking. >> Anyone else see this behavior or know where to look? >> >> Thanks in advance, >> Stefan >> >> >> > You didn't say what you upgraded from so this suggestion may be N/A, > have you checked systemd? 'systemctl list-unit-files', are these > scripts enabled? Hi Leroy, I should have been more specific. I did a clean install after a harddisk failure. But you already solved part of my problem: the firewall script was listed as disabled. I have to get used to systemd still I guess, didn't think to check that, just that the startup files were present in rcS.d Enabling it fixed the firewall. As it turns out smbd did start but keeps coredumping on first start, have to look into that some more Thanks for the hint! KR Stefan -------------- next part -------------- An HTML attachment was scrubbed... URL: From cbaptista at opensuse.us Mon Mar 20 11:03:08 2017 From: cbaptista at opensuse.us (Carlos Baptista) Date: Mon, 20 Mar 2017 11:03:08 +0000 Subject: Can mount cifs share Message-ID: <9841bfbf-e5c8-f8c6-7a9e-1edd4ecce491@opensuse.us> Hi all, I am trying to access a cifs share but I always have the same error: #sudo mount -o username=teste,uid=teste,gid=teste // zfs02 / images / mnt #mount error (13): Permission denied #Refer to the mount.cifs (8) manual page (eg man mount.cifs) I've tried several options, domain=dominio, noperm, username=domain\\teste, all with the same result. If I use the dolphin to access I have no problems. I have more cifs mounts on this machine with no problems. This cifs share is an solaris samba share. Kubuntu 16.10 Kernel 4.8.0-42-generic Does anyone have a suggestion? Thanks Carlos Baptista -------------- next part -------------- An HTML attachment was scrubbed... URL: From temps.jo at gmail.com Mon Mar 20 14:34:19 2017 From: temps.jo at gmail.com (pierre jocelyn andre) Date: Mon, 20 Mar 2017 15:34:19 +0100 Subject: Can mount cifs share In-Reply-To: <9841bfbf-e5c8-f8c6-7a9e-1edd4ecce491@opensuse.us> References: <9841bfbf-e5c8-f8c6-7a9e-1edd4ecce491@opensuse.us> Message-ID: [global] workgroup = DDL3 wins support = yes [eao23] comment = Documentation Samba Server path=/home/place23e24/Desktop/Working_directory guest only = Yes guest ok = yes available = yes browsable = yes public = yes for nano /etc/samba/smb.conf 2017-03-20 12:03 GMT+01:00 Carlos Baptista : > Hi all, > > I am trying to access a cifs share but I always have the same error: > > #sudo mount -o username=teste,uid=teste,gid=teste // zfs02 / images / mnt > #mount error (13): Permission denied > #Refer to the mount.cifs (8) manual page (eg man mount.cifs) > > I've tried several options, domain=dominio, noperm, > username=domain\\teste, all with the same result. > If I use the dolphin to access I have no problems. > > I have more cifs mounts on this machine with no problems. This cifs share > is an solaris samba share. > > Kubuntu 16.10 > Kernel 4.8.0-42-generic > > > Does anyone have a suggestion? > > Thanks > Carlos Baptista > > > -- > kubuntu-users mailing list > kubuntu-users at lists.ubuntu.com > Modify settings or unsubscribe at: https://lists.ubuntu.com/ > mailman/listinfo/kubuntu-users > > -------------- next part -------------- An HTML attachment was scrubbed... URL: