Slow transfer rates with FTP and Fish on Intrepid and Hardy

Nigel Henry cave.dnb2m97pp at aliceadsl.fr
Mon Feb 15 21:26:21 UTC 2010


On Monday 15 February 2010 18:57, Hakan Koseoglu wrote:
> Hi Nigel,
>
> On Mon, Feb 15, 2010 at 4:56 PM, Nigel Henry
>
> <cave.dnb2m97pp at aliceadsl.fr> wrote:
> > I'm getting very slow transfer rates 10 - 50KB/s when transfering data
> > using Gftp on my local network. This is specifically with Kubuntu and
> > Ubuntu Intrepid, and Kubuntu Hardy.
>
> Test the actual network performance using a tool like iperf. Sample run
> below:

Hi. I ran the tests as below. For some reason iperf is not working as on your 
example. I also tried it on Dapper, and Debian Etch (on the same machine), 
where Gftp gets the directory listing as soon as I click enter, and transfers 
are quick, but iperf shows the same as below which was from Intrepid.

So the situation is that Gftp on Dapper, and Debian Etch transfer files at 
high speed, but Gutsy, Hardy, and Intrepid transfer really slowly, like the 
connection is somehow throttled.

Nigel.

Last login: Mon Feb 15 21:21:06 2010
djmons at djmons-desktop:~$ sudo iperf -c 192.168.0.230
[sudo] password for djmons:
connect failed: Connection refused
write1 failed: Broken pipe
------------------------------------------------------------
Client connecting to 192.168.0.230, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
write2 failed: Broken pipe
[  3] local 0.0.0.0 port 51918 connected with 192.168.0.230 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0- 0.0 sec  0.00 Bytes  0.00 bits/sec
djmons at djmons-desktop:~$
djmons at djmons-desktop:~$
djmons at djmons-desktop:~$ sudo ethtool eth0
Settings for eth0:
        Supported ports: [ TP MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 32
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: pumbg
        Wake-on: d
        Current message level: 0x00000007 (7)
        Link detected: yes
djmons at djmons-desktop:~$ sudo ifconfig
eth0      Link encap:Ethernet  HWaddr 00:40:f4:8c:8d:37
          inet addr:192.168.0.221  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::240:f4ff:fe8c:8d37/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2905 errors:14 dropped:20 overruns:5 frame:0
          TX packets:691 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3959406 (3.9 MB)  TX bytes:55997 (55.9 KB)
          Interrupt:5 Base address:0xd400

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:22 errors:0 dropped:0 overruns:0 frame:0
          TX packets:22 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1100 (1.1 KB)  TX bytes:1100 (1.1 KB)

djmons at djmons-desktop:~$





More information about the kubuntu-users mailing list