[Kubuntu-de] Brother Scanner

[Reinhard Seidler]

Servus Hartmut

Am 04.03.2013 18:07, schrieb hha4491:
> Hallo Reinhard,
>> und wie gesagt beim Scannen kommt "...kein Gerät gefunden"
> o. k., probier doch nochmal
> sudo xsane &
> oder
> sudo simple-scan &
mit dem "&" glaube ich  kann das terminal nichts anfangen, oder?
> Was sagt sane-find-scanner?

ich kopiere da mal die ganzen Befehle rein



seidler at seidler-6100M2MA:~$ sudo xsane &
[1] 3800
seidler at seidler-6100M2MA:~$ sudo xsane
[sudo] password for seidler:

[1]+  Angehalten              sudo xsane
seidler at seidler-6100M2MA:~$ sudo simple-scan &
[2] 3808
seidler at seidler-6100M2MA:~$ sudo: simple-scan: Befehl nicht gefunden

[2]-  Exit 1                  sudo simple-scan
seidler at seidler-6100M2MA:~$ sane-find-scanner?
Der Befehl »sane-find-scanner?« wurde nicht gefunden, meinten Sie 
vielleicht:
  Befehl »sane-find-scanner« aus dem Paket »sane-utils« (main)
sane-find-scanner?: Befehl nicht gefunden.
seidler at seidler-6100M2MA:~$ sane-find-scanner

   # sane-find-scanner will now attempt to detect your scanner. If the
   # result is different from what you expected, first make sure your
   # scanner is powered up and properly connected to your computer.

   # No SCSI scanners found. If you expected something different, make 
sure that
   # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x05e3/0x0604 at 002:002: Access denied 
(insufficient permissions)
could not open USB device 0x04f9/0x01b7 at 002:005: Access denied 
(insufficient permissions)
could not open USB device 0x045e/0x00f6 at 002:003: Access denied 
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied 
(insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 002:001: Access denied 
(insufficient permissions)
could not open USB device 0x04f9/0x0043 at 002:004: Access denied 
(insufficient permissions)
   # No USB scanners found. If you expected something different, make 
sure that
   # you have loaded a kernel driver for your USB host controller and 
have setup
   # the USB system correctly. See man sane-usb for details.

   # Not checking for parallel port scanners.

   # Most Scanners connected to the parallel port or other proprietary ports
   # can't be detected by this program.

   # You may want to run this program as root to find all devices. Once you
   # found the scanner devices, be sure to adjust access permissions as
   # necessary.
seidler at seidler-6100M2MA:~$

Gruß
Reini