[Bug 788322] Re: input output error when burning blu-ray discs (bd-r)
Bug Watch Updater
788322 at bugs.launchpad.net
Sat Oct 28 07:39:37 UTC 2017
Launchpad has imported 21 comments from the remote bug at
https://bugzilla.redhat.com/show_bug.cgi?id=858029.
If you reply to an imported comment from within Launchpad, your comment
will be sent to the remote bug automatically. Read more about
Launchpad's inter-bugtracker facilities at
https://help.launchpad.net/InterBugTracking.
------------------------------------------------------------------------
On 2012-09-17T20:02:53+00:00 Reartes wrote:
Created attachment 613768
growisofs error when closing the first BD-R session
Description of problem:
When burning a BD-R, the first session is written but it cannot be
closed.
Version-Release number of selected component (if applicable):
dvd+rw-tools.x86_64 7.1-9.fc17
kernel 3.5.3-1.fc17.x86_64
How reproducible:
always
Steps to Reproduce:
1. instert a BD-R SL
2. growisofs -Z /dev/sr0 -J -allow-limited-size -udf -iso-level 3 ./
3. data is "writen" but the session "fails" to close.
Actual results:
99.91% done, estimate finish Mon Sep 17 16:25:35 2012
99.98% done, estimate finish Mon Sep 17 16:25:35 2012
Total translation table size: 0
Total rockridge attributes bytes: 0
Total directory bytes: 2048
Path table size(bytes): 22
Max brk space used 0
7566770 extents written (14778 MB)
builtin_dd: 7566784*2KB out @ average 3.2x4390KBps
/dev/sr0: flushing cache
/dev/sr0: closing track
/dev/sr0: closing session
:-[ CLOSE SESSION failed with SK=5h/INVALID FIELD IN CDB]: Input/output error
/dev/sr0: reloading tray
Expected results:
no error
Additional info:
* I first noticed it when using K3b, the first time i tried to burn one
BD-R. Then i tried to reproduce it without K3b, and here i am.
* Tried two different BD-R brands.
* Writer: ATAPI iHBS112 2, CL0K
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/11
------------------------------------------------------------------------
On 2012-09-17T22:26:36+00:00 Reartes wrote:
Created attachment 613806
growisofs error when closing the first BD-R session, burning at lower speed
Unlike a default speed burn, a lot of these were shown:
:-? the LUN appears to be stuck writing LBA=2e40h, keep retrying in 2ms
The result was similar or the same.
99.98% done, estimate finish Mon Sep 17 18:21:01 2012
Total translation table size: 0
Total rockridge attributes bytes: 2760
Total directory bytes: 2048
Path table size(bytes): 22
Max brk space used 0
7566773 extents written (14778 MB)
builtin_dd: 7566784*2KB out @ average 1.7x4390KBps
/dev/sr0: flushing cache
/dev/sr0: closing track
/dev/sr0: closing session
:-[ CLOSE SESSION failed with SK=5h/INVALID FIELD IN CDB]: Input/output error
/dev/sr0: reloading tray
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/12
------------------------------------------------------------------------
On 2012-09-18T08:39:51+00:00 Honza wrote:
Thanks for reporting. Is the data readable after writing with such
error?
Looking at upstream mailing list, some other users had a similar issue,
but it was actually harmless, when speaking about data itself on media:
http://www.mail-archive.com/cdwrite@other.debian.org/msg12106.html
http://www.mail-archive.com/cdwrite@other.debian.org/msg13071.html
(In reply to comment #1)
> :-? the LUN appears to be stuck writing LBA=2e40h, keep retrying in 2ms
This should be OK for fast drives choosing lower speed for writing.
There are some sane limits, that can be too lower for your drive, so
some warning messages are printed, but you don't have to pay attention
to them.
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/13
------------------------------------------------------------------------
On 2012-09-18T11:53:13+00:00 Reartes wrote:
> Is the data readable after writing with such error?
I am not sure.
The disc with one big file was ok. I compared the sha256sum.
The disc with 12+ files was ok, it was really annoying to check
those sha256sum but i did it.
The disc with +100 files is not ok. The last files are not readable.
I am not sure. When reading the last 3 bad files, there are errors
in the message file:
Sep 18 08:34:28 ulquiorra kernel: [53268.787026] sr0: rw=0, want=47420264, limit=47304704
Sep 18 08:34:28 ulquiorra kernel: [53268.787042] attempt to access beyond end of device
Sep 18 08:34:28 ulquiorra kernel: [53268.787044] sr0: rw=0, want=47420264, limit=47304704
Sep 18 08:34:28 ulquiorra kernel: [53268.787047] attempt to access beyond end of device
Sep 18 08:34:28 ulquiorra kernel: [53268.787048] sr0: rw=0, want=47420264, limit=47304704
Sep 18 08:34:28 ulquiorra kernel: [53268.787058] attempt to access beyond end of device
Sep 18 08:34:28 ulquiorra kernel: [53268.787059] sr0: rw=0, want=47420264, limit=47304704
Sep 18 08:34:28 ulquiorra kernel: [53268.787067] attempt to access beyond end of device
Sep 18 08:34:28 ulquiorra kernel: [53268.787068] sr0: rw=0, want=47420264, limit=47304704
Sep 18 08:34:28 ulquiorra kernel: [53268.787071] attempt to access beyond end of device
Sep 18 08:34:28 ulquiorra kernel: [53268.787073] sr0: rw=0, want=47420264, limit=47304704
Sep 18 08:34:28 ulquiorra kernel: [53268.787076] attempt to access beyond end of device
Sep 18 08:34:28 ulquiorra kernel: [53268.787077] sr0: rw=0, want=47420264, limit=47304704
But main issue is that it blocks K3B from being able to verify
that all burned files are ok. With one or two files, one can
calculate the sha25sum manually, but with 100+ files...
And in my case, after burning them, i intend to delete them
from the hdd... so the burn verify option from K3B is really needed.
https://bugs.kde.org/show_bug.cgi?id=257652
https://bugs.kde.org/show_bug.cgi?id=242128
https://bugs.kde.org/show_bug.cgi?id=281818
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/14
------------------------------------------------------------------------
On 2012-09-18T12:28:58+00:00 Honza wrote:
Well, I guess k3b should still do the verification, even if there are
some "warnings". Maybe the problem is only how to distinguish between
such warnings and real unrepairable errors..
Let's re-assign this to k3b for now, maybe k3b maintainers have some
idea, how to solve this.
Another thought is if this error could be possibly caused by a fix for bug #810483. Can you, please, test an older build without that patch, Reartes? I've built it for F17:
https://koji.fedoraproject.org/koji/taskinfo?taskID=4497634
Another test you can do is to try libburn and xorriso utility if there
is an error as well. Looking into libburn code it seems it uses some
other SCSI commands to close a session, which can be less problematic.
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/15
------------------------------------------------------------------------
On 2012-09-18T14:49:49+00:00 Reartes wrote:
Created attachment 614039
xorriso test
I tried with xorriso and it did not fail. however, cannot perform the
check-sums manually for such amount of files. Xorriso seems to have a
lot of options. I will check them first.
I will try the suggest growisofs version later and report back.
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/16
------------------------------------------------------------------------
On 2012-09-18T14:51:27+00:00 Reartes wrote:
Created attachment 614040
xorriso test, same size as previous growisofs
The first xorriso was smaller. So i added the same files to the original growisofs
+100 files. And that failed. I am not sure why.
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/17
------------------------------------------------------------------------
On 2013-01-04T22:39:26+00:00 Wolfgang wrote:
I'm seeing the same error when writing a pre-made iso to disk with:
growisofs -Z $RAWCD=$ISOFILE
dvd+rw-tools.x86_64 7.1-9.fc17 @anaconda-0
kernel.x86_64 3.6.10-2.fc17 @updates
BDR drive: LG WH14NS40
BDR disk: Philips 6x BDR
Mounted Media: 41h, BD-R SRM
Media ID: CMCMAG/BA5
...
23015587840/23096199168 (99.7%) @3.1x, remaining 0:06 RBU 100.0% UBU 90.3%
23063756800/23096199168 (99.9%) @3.2x, remaining 0:02 RBU 100.0% UBU 98.6%
builtin_dd: 11277456*2KB out @ average 3.0x4390KBps
/dev/sr0: flushing cache
/dev/sr0: closing track
/dev/sr0: closing session
:-[ CLOSE SESSION failed with SK=5h/INVALID FIELD IN CDB]: Input/output error
/dev/sr0: reloading tray
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/19
------------------------------------------------------------------------
On 2013-03-10T19:00:01+00:00 Reartes wrote:
I changed the component back to growisofs since the issue is
reproducible without k3b.
I opened Bug 316384 "k3b cannot verify BD-R due to i/o error but logs
shows none" at upstream for k3b being unable to "verify" the burned
files (and just that).
Please ignore comments: #1, #2, #3
These might be different issues, i might open a bug-report for those if i can reproduce them.
I could not test the builds from #4, at that time.
I experimented with xorrisofs (comments #4, #5, #6) and nero for linux.
I will use this bug-report for tracking the error described in both the Description (comment#0) and in comment#7.
I tried with nero for linux, and it did not exhibit the issue at all.
Nero also had no troubles verifying the burned files.
# nerocmd --bd --verify --volume-name=demo --udf --rockridge --write --drive=11,0,0 --close-session --data /data2/*
You're running a demo version. Your license is valid until : 04/08/13
Checking discs
[i] Checking discs
PHASE: Start cache
Writing to cache
[i] Caching of files started
PHASE: Done cache
[i] Caching of files completed
[i] The current process cannot be interrupted
PHASE: Start write
Writing to disc
[i] Burn process started at 10x (44950 KB/s)
Writing lead-in
[i] Writing lead-in
Writing tracks
[i] Writing tracks
Writing lead-out
[i] Writing lead-out
[i] The process can be interrupted again
PHASE: Done write
[i] Burn process completed successfully at 10x (44950 KB/s)
PHASE: Verify compilation
Verifying disc
[i] Data verification started
PHASE: Verify end ok .......
[i] Data verification completed successfully
Ok.
But for growisofs the issue does still happens for the first session only.
The next sessions do work ok.
# growisofs -Z /dev/sr0 -R -J 1/
Executing 'mkisofs -R -J 1/ | builtin_dd of=/dev/sr0 obs=32k seek=0'
I: -input-charset not specified, using utf-8 (detected in locale settings)
1.31% done, estimate finish Sat Mar 9 17:01:32 2013
/dev/sr0: pre-formatting blank BD-R for 24.8GB...
/dev/sr0: "Current Write Speed" is 10.2x4390KBps.
2.62% done, estimate finish Sat Mar 9 17:23:46 2013
3.93% done, estimate finish Sat Mar 9 17:22:18 2013
5.24% done, estimate finish Sat Mar 9 17:19:39 2013
6.55% done, estimate finish Sat Mar 9 17:19:05 2013
7.86% done, estimate finish Sat Mar 9 17:19:58 2013
9.17% done, estimate finish Sat Mar 9 17:18:58 2013
10.48% done, estimate finish Sat Mar 9 17:18:23 2013
11.79% done, estimate finish Sat Mar 9 17:18:38 2013
13.10% done, estimate finish Sat Mar 9 17:18:27 2013
14.41% done, estimate finish Sat Mar 9 17:17:50 2013
15.72% done, estimate finish Sat Mar 9 17:17:57 2013
17.03% done, estimate finish Sat Mar 9 17:17:52 2013
18.34% done, estimate finish Sat Mar 9 17:17:15 2013
19.65% done, estimate finish Sat Mar 9 17:17:13 2013
20.96% done, estimate finish Sat Mar 9 17:17:07 2013
22.27% done, estimate finish Sat Mar 9 17:16:57 2013
23.58% done, estimate finish Sat Mar 9 17:16:22 2013
24.89% done, estimate finish Sat Mar 9 17:16:19 2013
26.20% done, estimate finish Sat Mar 9 17:15:39 2013
27.51% done, estimate finish Sat Mar 9 17:15:17 2013
28.82% done, estimate finish Sat Mar 9 17:15:03 2013
30.13% done, estimate finish Sat Mar 9 17:14:55 2013
31.44% done, estimate finish Sat Mar 9 17:14:34 2013
32.75% done, estimate finish Sat Mar 9 17:14:21 2013
34.06% done, estimate finish Sat Mar 9 17:14:03 2013
35.37% done, estimate finish Sat Mar 9 17:13:44 2013
36.68% done, estimate finish Sat Mar 9 17:13:20 2013
37.99% done, estimate finish Sat Mar 9 17:13:01 2013
39.30% done, estimate finish Sat Mar 9 17:12:56 2013
40.61% done, estimate finish Sat Mar 9 17:12:36 2013
41.92% done, estimate finish Sat Mar 9 17:12:25 2013
43.22% done, estimate finish Sat Mar 9 17:12:19 2013
44.54% done, estimate finish Sat Mar 9 17:12:05 2013
45.84% done, estimate finish Sat Mar 9 17:11:53 2013
47.16% done, estimate finish Sat Mar 9 17:11:40 2013
48.46% done, estimate finish Sat Mar 9 17:11:30 2013
49.78% done, estimate finish Sat Mar 9 17:11:18 2013
51.08% done, estimate finish Sat Mar 9 17:11:05 2013
52.40% done, estimate finish Sat Mar 9 17:10:53 2013
53.70% done, estimate finish Sat Mar 9 17:10:45 2013
55.01% done, estimate finish Sat Mar 9 17:10:35 2013
56.32% done, estimate finish Sat Mar 9 17:10:24 2013
57.63% done, estimate finish Sat Mar 9 17:10:15 2013
58.94% done, estimate finish Sat Mar 9 17:10:06 2013
60.25% done, estimate finish Sat Mar 9 17:09:54 2013
61.56% done, estimate finish Sat Mar 9 17:09:49 2013
62.87% done, estimate finish Sat Mar 9 17:09:40 2013
64.18% done, estimate finish Sat Mar 9 17:09:31 2013
65.49% done, estimate finish Sat Mar 9 17:09:23 2013
66.80% done, estimate finish Sat Mar 9 17:09:16 2013
68.11% done, estimate finish Sat Mar 9 17:09:08 2013
69.42% done, estimate finish Sat Mar 9 17:09:01 2013
70.73% done, estimate finish Sat Mar 9 17:08:54 2013
72.04% done, estimate finish Sat Mar 9 17:08:49 2013
73.35% done, estimate finish Sat Mar 9 17:08:41 2013
74.66% done, estimate finish Sat Mar 9 17:08:35 2013
75.97% done, estimate finish Sat Mar 9 17:08:29 2013
77.28% done, estimate finish Sat Mar 9 17:08:23 2013
78.59% done, estimate finish Sat Mar 9 17:08:19 2013
79.90% done, estimate finish Sat Mar 9 17:08:13 2013
81.21% done, estimate finish Sat Mar 9 17:08:10 2013
82.52% done, estimate finish Sat Mar 9 17:08:05 2013
83.83% done, estimate finish Sat Mar 9 17:08:00 2013
85.14% done, estimate finish Sat Mar 9 17:07:56 2013
86.45% done, estimate finish Sat Mar 9 17:07:50 2013
87.76% done, estimate finish Sat Mar 9 17:07:46 2013
89.07% done, estimate finish Sat Mar 9 17:07:43 2013
90.38% done, estimate finish Sat Mar 9 17:07:39 2013
91.69% done, estimate finish Sat Mar 9 17:07:36 2013
93.00% done, estimate finish Sat Mar 9 17:07:32 2013
94.31% done, estimate finish Sat Mar 9 17:07:28 2013
95.62% done, estimate finish Sat Mar 9 17:07:24 2013
96.93% done, estimate finish Sat Mar 9 17:07:20 2013
98.24% done, estimate finish Sat Mar 9 17:07:17 2013
99.55% done, estimate finish Sat Mar 9 17:07:12 2013
Total translation table size: 0
Total rockridge attributes bytes: 246
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 0
381743 extents written (745 MB)
builtin_dd: 381744*2KB out @ average 0.6x4390KBps
/dev/sr0: flushing cache
/dev/sr0: closing track
/dev/sr0: closing session
:-[ CLOSE SESSION failed with SK=5h/INVALID FIELD IN CDB]: Input/output error
/dev/sr0: reloading tray
Current Software version:
kernel 3.7.9-104.fc17.x86_64
dvd+rw-tools.x86_64 7.1-9.fc17
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/20
------------------------------------------------------------------------
On 2013-03-10T20:35:13+00:00 Reartes wrote:
Created attachment 708056
blkparse file obtained from blktrace the command below
Test #1:
Eject any disc and leave the optical drive empty.
Start the blktrace instance over the optical drive:
# blktrace -d /dev/sr0 -o - &> ~/blkt-BD-R-20130310.02.out
Inser a blank BD-R media on the optical drive and Burn with growisofs:
# growisofs -Z /dev/sr0 -R -J ./1/*
Stop the blktrace instance over the optical drive (CTRL+C)
Obtain a human readable output of the captured file:
# cat blkt-BD-R-20130310.02.out | blkparse -i - -o blkparse-BD-R-20130310.02.out
Output of the command:
# growisofs -Z /dev/sr0 -R -J ./1/*
Executing 'mkisofs -R -J ./1/1.dat | builtin_dd of=/dev/sr0 obs=32k seek=0'
I: -input-charset not specified, using utf-8 (detected in locale settings)
1.31% done, estimate finish Sun Mar 10 16:51:23 2013
/dev/sr0: pre-formatting blank BD-R for 24.8GB...
/dev/sr0: "Current Write Speed" is 10.2x4390KBps.
2.62% done, estimate finish Sun Mar 10 17:14:53 2013
3.93% done, estimate finish Sun Mar 10 17:08:45 2013
5.24% done, estimate finish Sun Mar 10 17:04:44 2013
6.55% done, estimate finish Sun Mar 10 17:02:19 2013
7.86% done, estimate finish Sun Mar 10 17:00:42 2013
9.17% done, estimate finish Sun Mar 10 16:59:33 2013
10.48% done, estimate finish Sun Mar 10 16:58:41 2013
11.79% done, estimate finish Sun Mar 10 16:58:01 2013
13.10% done, estimate finish Sun Mar 10 16:57:29 2013
14.41% done, estimate finish Sun Mar 10 16:57:03 2013
15.72% done, estimate finish Sun Mar 10 16:56:41 2013
17.03% done, estimate finish Sun Mar 10 16:56:22 2013
18.34% done, estimate finish Sun Mar 10 16:56:06 2013
19.65% done, estimate finish Sun Mar 10 16:55:52 2013
20.96% done, estimate finish Sun Mar 10 16:55:40 2013
22.27% done, estimate finish Sun Mar 10 16:55:29 2013
23.58% done, estimate finish Sun Mar 10 16:55:20 2013
24.89% done, estimate finish Sun Mar 10 16:55:12 2013
26.20% done, estimate finish Sun Mar 10 16:55:04 2013
27.51% done, estimate finish Sun Mar 10 16:54:57 2013
28.82% done, estimate finish Sun Mar 10 16:54:51 2013
30.13% done, estimate finish Sun Mar 10 16:54:45 2013
31.44% done, estimate finish Sun Mar 10 16:54:40 2013
32.75% done, estimate finish Sun Mar 10 16:54:35 2013
34.06% done, estimate finish Sun Mar 10 16:54:30 2013
35.37% done, estimate finish Sun Mar 10 16:54:26 2013
36.68% done, estimate finish Sun Mar 10 16:54:20 2013
37.99% done, estimate finish Sun Mar 10 16:54:19 2013
39.30% done, estimate finish Sun Mar 10 16:54:13 2013
40.61% done, estimate finish Sun Mar 10 16:54:10 2013
41.92% done, estimate finish Sun Mar 10 16:54:07 2013
43.22% done, estimate finish Sun Mar 10 16:54:04 2013
44.54% done, estimate finish Sun Mar 10 16:54:02 2013
45.84% done, estimate finish Sun Mar 10 16:54:00 2013
47.16% done, estimate finish Sun Mar 10 16:53:57 2013
48.46% done, estimate finish Sun Mar 10 16:53:55 2013
49.78% done, estimate finish Sun Mar 10 16:53:53 2013
51.08% done, estimate finish Sun Mar 10 16:53:51 2013
52.40% done, estimate finish Sun Mar 10 16:53:49 2013
53.70% done, estimate finish Sun Mar 10 16:53:48 2013
55.01% done, estimate finish Sun Mar 10 16:53:46 2013
56.32% done, estimate finish Sun Mar 10 16:53:45 2013
57.63% done, estimate finish Sun Mar 10 16:53:43 2013
58.94% done, estimate finish Sun Mar 10 16:53:42 2013
60.25% done, estimate finish Sun Mar 10 16:53:40 2013
61.56% done, estimate finish Sun Mar 10 16:53:39 2013
62.87% done, estimate finish Sun Mar 10 16:53:38 2013
64.18% done, estimate finish Sun Mar 10 16:53:36 2013
65.49% done, estimate finish Sun Mar 10 16:53:35 2013
66.80% done, estimate finish Sun Mar 10 16:53:33 2013
68.11% done, estimate finish Sun Mar 10 16:53:32 2013
69.42% done, estimate finish Sun Mar 10 16:53:31 2013
70.73% done, estimate finish Sun Mar 10 16:53:30 2013
72.04% done, estimate finish Sun Mar 10 16:53:29 2013
73.35% done, estimate finish Sun Mar 10 16:53:28 2013
74.66% done, estimate finish Sun Mar 10 16:53:27 2013
75.97% done, estimate finish Sun Mar 10 16:53:26 2013
77.28% done, estimate finish Sun Mar 10 16:53:25 2013
78.59% done, estimate finish Sun Mar 10 16:53:25 2013
79.90% done, estimate finish Sun Mar 10 16:53:24 2013
81.21% done, estimate finish Sun Mar 10 16:53:23 2013
82.52% done, estimate finish Sun Mar 10 16:53:22 2013
83.83% done, estimate finish Sun Mar 10 16:53:21 2013
85.14% done, estimate finish Sun Mar 10 16:53:20 2013
86.45% done, estimate finish Sun Mar 10 16:53:19 2013
87.76% done, estimate finish Sun Mar 10 16:53:19 2013
89.07% done, estimate finish Sun Mar 10 16:53:18 2013
90.38% done, estimate finish Sun Mar 10 16:53:18 2013
91.69% done, estimate finish Sun Mar 10 16:53:17 2013
93.00% done, estimate finish Sun Mar 10 16:53:16 2013
94.31% done, estimate finish Sun Mar 10 16:53:16 2013
95.62% done, estimate finish Sun Mar 10 16:53:15 2013
96.93% done, estimate finish Sun Mar 10 16:53:14 2013
98.24% done, estimate finish Sun Mar 10 16:53:14 2013
99.55% done, estimate finish Sun Mar 10 16:53:13 2013
Total translation table size: 0
Total rockridge attributes bytes: 246
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 0
381743 extents written (745 MB)
builtin_dd: 381744*2KB out @ average 2.3x4390KBps
/dev/sr0: flushing cache
/dev/sr0: closing track
/dev/sr0: closing session
:-[ CLOSE SESSION failed with SK=5h/INVALID FIELD IN CDB]: Input/output error
/dev/sr0: reloading tray
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/21
------------------------------------------------------------------------
On 2013-03-10T20:39:45+00:00 Reartes wrote:
Created attachment 708057
strace output of the command executed below
Test #2:
Insert a new blank media into the optical drive and burn with growisofs while performing an strace:
# strace -f -o growisofs-strace-20130310.03.out growisofs -Z /dev/sr0 -R -J ./1/*
Output of the command:
# strace -f -o growisofs-strace-20130310.03.out growisofs -Z /dev/sr0 -R -J ./1/*
Executing 'mkisofs -R -J ./1/1.dat | builtin_dd of=/dev/sr0 obs=32k seek=0'
I: -input-charset not specified, using utf-8 (detected in locale settings)
1.31% done, estimate finish Sun Mar 10 17:16:26 2013
/dev/sr0: pre-formatting blank BD-R for 24.8GB...
/dev/sr0: "Current Write Speed" is 12.3x4390KBps.
2.62% done, estimate finish Sun Mar 10 17:37:23 2013
3.93% done, estimate finish Sun Mar 10 17:32:07 2013
5.24% done, estimate finish Sun Mar 10 17:28:30 2013
6.55% done, estimate finish Sun Mar 10 17:26:21 2013
7.86% done, estimate finish Sun Mar 10 17:24:54 2013
9.17% done, estimate finish Sun Mar 10 17:23:53 2013
10.48% done, estimate finish Sun Mar 10 17:23:06 2013
11.79% done, estimate finish Sun Mar 10 17:22:30 2013
13.10% done, estimate finish Sun Mar 10 17:22:01 2013
14.41% done, estimate finish Sun Mar 10 17:21:38 2013
15.72% done, estimate finish Sun Mar 10 17:21:18 2013
17.03% done, estimate finish Sun Mar 10 17:21:01 2013
18.34% done, estimate finish Sun Mar 10 17:20:47 2013
19.65% done, estimate finish Sun Mar 10 17:20:35 2013
20.96% done, estimate finish Sun Mar 10 17:20:24 2013
22.27% done, estimate finish Sun Mar 10 17:20:15 2013
23.58% done, estimate finish Sun Mar 10 17:20:06 2013
24.89% done, estimate finish Sun Mar 10 17:19:58 2013
26.20% done, estimate finish Sun Mar 10 17:19:52 2013
27.51% done, estimate finish Sun Mar 10 17:19:45 2013
28.82% done, estimate finish Sun Mar 10 17:19:40 2013
30.13% done, estimate finish Sun Mar 10 17:19:35 2013
31.44% done, estimate finish Sun Mar 10 17:19:30 2013
32.75% done, estimate finish Sun Mar 10 17:19:26 2013
34.06% done, estimate finish Sun Mar 10 17:19:22 2013
35.37% done, estimate finish Sun Mar 10 17:19:18 2013
36.68% done, estimate finish Sun Mar 10 17:19:15 2013
37.99% done, estimate finish Sun Mar 10 17:19:11 2013
39.30% done, estimate finish Sun Mar 10 17:19:08 2013
40.61% done, estimate finish Sun Mar 10 17:19:06 2013
41.92% done, estimate finish Sun Mar 10 17:19:03 2013
43.22% done, estimate finish Sun Mar 10 17:19:01 2013
44.54% done, estimate finish Sun Mar 10 17:18:58 2013
45.84% done, estimate finish Sun Mar 10 17:18:56 2013
47.16% done, estimate finish Sun Mar 10 17:18:54 2013
48.46% done, estimate finish Sun Mar 10 17:18:52 2013
49.78% done, estimate finish Sun Mar 10 17:18:50 2013
51.08% done, estimate finish Sun Mar 10 17:18:48 2013
52.40% done, estimate finish Sun Mar 10 17:18:47 2013
53.70% done, estimate finish Sun Mar 10 17:18:45 2013
55.01% done, estimate finish Sun Mar 10 17:18:45 2013
56.32% done, estimate finish Sun Mar 10 17:18:44 2013
57.63% done, estimate finish Sun Mar 10 17:18:41 2013
58.94% done, estimate finish Sun Mar 10 17:18:40 2013
60.25% done, estimate finish Sun Mar 10 17:18:40 2013
61.56% done, estimate finish Sun Mar 10 17:18:39 2013
62.87% done, estimate finish Sun Mar 10 17:18:36 2013
64.18% done, estimate finish Sun Mar 10 17:18:35 2013
65.49% done, estimate finish Sun Mar 10 17:18:35 2013
66.80% done, estimate finish Sun Mar 10 17:18:33 2013
68.11% done, estimate finish Sun Mar 10 17:18:33 2013
69.42% done, estimate finish Sun Mar 10 17:18:32 2013
70.73% done, estimate finish Sun Mar 10 17:18:31 2013
72.04% done, estimate finish Sun Mar 10 17:18:32 2013
73.35% done, estimate finish Sun Mar 10 17:18:31 2013
74.66% done, estimate finish Sun Mar 10 17:18:30 2013
75.97% done, estimate finish Sun Mar 10 17:18:28 2013
77.28% done, estimate finish Sun Mar 10 17:18:27 2013
78.59% done, estimate finish Sun Mar 10 17:18:26 2013
79.90% done, estimate finish Sun Mar 10 17:18:26 2013
81.21% done, estimate finish Sun Mar 10 17:18:25 2013
82.52% done, estimate finish Sun Mar 10 17:18:25 2013
83.83% done, estimate finish Sun Mar 10 17:18:24 2013
85.14% done, estimate finish Sun Mar 10 17:18:24 2013
86.45% done, estimate finish Sun Mar 10 17:18:23 2013
87.76% done, estimate finish Sun Mar 10 17:18:23 2013
89.07% done, estimate finish Sun Mar 10 17:18:22 2013
90.38% done, estimate finish Sun Mar 10 17:18:22 2013
91.69% done, estimate finish Sun Mar 10 17:18:21 2013
93.00% done, estimate finish Sun Mar 10 17:18:19 2013
94.31% done, estimate finish Sun Mar 10 17:18:19 2013
95.62% done, estimate finish Sun Mar 10 17:18:18 2013
96.93% done, estimate finish Sun Mar 10 17:18:18 2013
98.24% done, estimate finish Sun Mar 10 17:18:17 2013
99.55% done, estimate finish Sun Mar 10 17:18:17 2013
Total translation table size: 0
Total rockridge attributes bytes: 246
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 0
381743 extents written (745 MB)
builtin_dd: 381744*2KB out @ average 2.1x4390KBps
/dev/sr0: flushing cache
/dev/sr0: closing track
/dev/sr0: closing session
:-[ CLOSE SESSION failed with SK=5h/INVALID FIELD IN CDB]: Input/output error
/dev/sr0: reloading tray
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/22
------------------------------------------------------------------------
On 2013-06-24T16:25:19+00:00 Fedora wrote:
dvd+rw-tools-7.1-13.fc18 has been submitted as an update for Fedora 18.
https://admin.fedoraproject.org/updates/dvd+rw-tools-7.1-13.fc18
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/30
------------------------------------------------------------------------
On 2013-06-24T16:35:00+00:00 Frantisek wrote:
Could you please test if the update fixes your problem?
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/31
------------------------------------------------------------------------
On 2013-06-24T16:40:13+00:00 Reartes wrote:
Hi,
Both systems have currently F17 Installed. Sadly, i don't have any F18 installation at the moment.
But since i skipped F18, F19b is also installed on both systems for testing.
Additionally, i now have another writer to test, on the other system.
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/32
------------------------------------------------------------------------
On 2013-06-24T17:05:04+00:00 Fedora wrote:
dvd+rw-tools-7.1-13.fc17 has been submitted as an update for Fedora 17.
https://admin.fedoraproject.org/updates/dvd+rw-tools-7.1-13.fc17
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/33
------------------------------------------------------------------------
On 2013-06-24T19:25:50+00:00 Reartes wrote:
Ok, i tested System#1 with F17 (dvd+rw-tools-7.1-13.fc17) and
System#2 with F19 (dvd+rw-tools-7.1-13.fc19):
* System#1 F17: Model: iHBS112, FW: CL0K (Kernel: 3.8.13-100.fc17.x86_64)
* System#2 F19: Model: iHBS112, FW: PL01 (Kernel: 3.9.6-301.fc19.x86_64)
I was able to write the first session without any error both with
growisofs directly and with K3b (and verify the written disc is now working!)
It seems fixed! Thanks!
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/34
------------------------------------------------------------------------
On 2013-07-04T07:00:37+00:00 Fedora wrote:
This message is a reminder that Fedora 17 is nearing its end of life.
Approximately 4 (four) weeks from now Fedora will stop maintaining
and issuing updates for Fedora 17. It is Fedora's policy to close all
bug reports from releases that are no longer maintained. At that time
this bug will be closed as WONTFIX if it remains open with a Fedora
'version' of '17'.
Package Maintainer: If you wish for this bug to remain open because you
plan to fix it in a currently maintained version, simply change the 'version'
to a later Fedora version prior to Fedora 17's end of life.
Bug Reporter: Thank you for reporting this issue and we are sorry that
we may not be able to fix it before Fedora 17 is end of life. If you
would still like to see this bug fixed and are able to reproduce it
against a later version of Fedora, you are encouraged change the
'version' to a later Fedora version prior to Fedora 17's end of life.
Although we aim to fix as many bugs as possible during every release's
lifetime, sometimes those efforts are overtaken by events. Often a
more recent Fedora release includes newer upstream software that fixes
bugs or makes them obsolete.
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/35
------------------------------------------------------------------------
On 2013-07-09T12:33:56+00:00 Fedora wrote:
dvd+rw-tools-7.1-13.fc19 has been submitted as an update for Fedora 19.
https://admin.fedoraproject.org/updates/FEDORA-2013-11668/dvd+rw-tools-7.1-13.fc19
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/36
------------------------------------------------------------------------
On 2013-07-16T01:47:12+00:00 Fedora wrote:
dvd+rw-tools-7.1-13.fc19 has been pushed to the Fedora 19 stable
repository. If problems still persist, please make note of it in this
bug report.
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/37
------------------------------------------------------------------------
On 2013-08-01T18:42:57+00:00 Fedora wrote:
Fedora 17 changed to end-of-life (EOL) status on 2013-07-30. Fedora 17 is
no longer maintained, which means that it will not receive any further
security or bug fix updates. As a result we are closing this bug.
If you can reproduce this bug against a currently maintained version of
Fedora please feel free to reopen this bug against that version.
Thank you for reporting this bug and we are sorry it could not be fixed.
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/39
------------------------------------------------------------------------
On 2013-08-02T21:56:02+00:00 Fedora wrote:
dvd+rw-tools-7.1-13.fc18 has been pushed to the Fedora 18 stable
repository. If problems still persist, please make note of it in this
bug report.
Reply at:
https://bugs.launchpad.net/ubuntu/+source/k3b/+bug/788322/comments/40
** Changed in: fedora
Status: Unknown => Won't Fix
** Changed in: fedora
Importance: Unknown => High
** Bug watch added: KDE Bug Tracking System #242128
https://bugs.kde.org/show_bug.cgi?id=242128
--
You received this bug notification because you are a member of Kubuntu
Bugs, which is subscribed to k3b in Ubuntu.
https://bugs.launchpad.net/bugs/788322
Title:
input output error when burning blu-ray discs (bd-r)
To manage notifications about this bug go to:
https://bugs.launchpad.net/k3b/+bug/788322/+subscriptions
More information about the kubuntu-bugs
mailing list