[Bug 1241842] Re: scanning with dvb s/s2 card broken

[msaxl]

Also, could you enable the following (will reset on reboot)

echo 'module dvb_core +p' | sudo tee
/sys/kernel/debug/dynamic_debug/control

this enables debugging of dvb_core, you will notice that dmesg says many 
things more regarding dvb that could help 

Am Dienstag, 14. Januar 2014, 18:31:08 schrieben Sie:
> Sure I can do that:
> 
> dmesg log:
> [   15.894763] usb 2-1.1: new low-speed USB device number 7 using ehci-pci
> [   15.994984] usb 2-1.1: New USB device found, idVendor=045e,
> idProduct=00e1 [   15.994996] usb 2-1.1: New USB device strings: Mfr=1,
> Product=2, SerialNumber=0 [   15.995005] usb 2-1.1: Product: Microsoft
> Notebook Receiver v2.0 [   15.995013] usb 2-1.1: Manufacturer: Microsoft
> [   16.007331] input: Microsoft Microsoft Notebook Receiver v2.0 as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input17 [  
> 16.007703] hid-generic 0003:045E:00E1.0003: input,hidraw2: USB HID v1.11
> Mouse [Microsoft Microsoft Notebook Receiver v2.0] on
> usb-0000:00:1d.0-1.1/input0 [  213.223678] usb 2-1.3: new high-speed USB
> device number 8 using ehci-pci [  213.316395] usb 2-1.3: New USB device
> found, idVendor=1554, idProduct=5010 [  213.316404] usb 2-1.3: New USB
> device strings: Mfr=1, Product=2, SerialNumber=3 [  213.316410] usb 2-1.3:
> Product: STK807X
> [  213.316414] usb 2-1.3: Manufacturer: DiBcom
> [  213.316419] usb 2-1.3: SerialNumber: 016
> [  213.410882] dvb-usb: found a 'Prolink Pixelview SBTVD' in cold state,
> will try to load a firmware [  213.411448] dvb-usb: downloading firmware
> from file 'dvb-usb-dib0700-1.20.fw' [  213.613677] dib0700: firmware
> started successfully.
> [  214.116168] dvb-usb: found a 'Prolink Pixelview SBTVD' in warm state.
> [  214.116273] dvb-usb: will pass the complete MPEG2 transport stream to the
> software demuxer. [  214.116463] DVB: registering new adapter (Prolink
> Pixelview SBTVD) [  214.378670] usb 2-1.3: DVB: registering adapter 0
> frontend 0 (DiBcom 8000 ISDB-T)... [  214.611976] DiB0070: successfully
> identified
> [  214.639941] Registered IR keymap rc-dib0700-nec
> [  214.640122] input: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/rc/rc0/input18 [ 
> 214.640249] rc0: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/rc/rc0 [  214.640478]
> dvb-usb: schedule remote query interval to 50 msecs. [  214.640487]
> dvb-usb: Prolink Pixelview SBTVD successfully initialized and connected. [ 
> 214.640792] usbcore: registered new interface driver dvb_usb_dib0700
> 
> I started Kaffeine from a terminal, and I got the following logs when I
> tried to scan channels. Kaffeine output:
> kaffeine(4116) DvbLinuxDevice::tune: ioctl FE_SET_FRONTEND failed for
> frontend "/dev/dvb/adapter0/frontend0" kaffeine(4116) DvbLinuxDevice::tune:
> ioctl FE_SET_FRONTEND failed for frontend "/dev/dvb/adapter0/frontend0"
> kaffeine(4116) DvbLinuxDevice::tune: ioctl FE_SET_FRONTEND failed for
> frontend "/dev/dvb/adapter0/frontend0" kaffeine(4116) DvbLinuxDevice::tune:
> ioctl FE_SET_FRONTEND failed for frontend "/dev/dvb/adapter0/frontend0"
> 
> And also for each message that I received on the terminal, I got one of this
> on syslog: usb 2-1.3: dtv_property_cache_sync: doesn't know how to handle a
> DVBv3 call to delivery system 0
> 
> If you need something else, let me know. I will be happy to assist you.

-- 
You received this bug notification because you are a member of Kubuntu
Bugs, which is subscribed to kaffeine in Ubuntu.
https://bugs.launchpad.net/bugs/1241842

Title:
  scanning with dvb s/s2 card broken

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/kaffeine/+bug/1241842/+subscriptions