[Bug 511526] Re: k3b1.68.0 fails to close the DVD dual-layer disk

salvoinzk salvoinz at yahoo.it
Tue Jan 26 19:53:10 UTC 2010


Still failed!

I have changed the writing speed by putting it to 4x (in my first check
was 2,4x).

but I get the same error.


here is the output script:


Devices
-----------------------
MATSHITA DVD-RAM UJ892AS 1.00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R sequenziale, DVD-R sequenziale a doppio strato, DVD-R jump a doppio strato, DVD-RAM, DVD-RW a riscrittura limitata, DVD-RW sequenziale, DVD+RW, DVD+R, DVD+R a doppio strato, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Riscrittura limitata, Livello Jump] [%7]

System
-----------------------
K3b Version: 1.68.0
KDE Version: 4.3.2 (KDE 4.3.2)
QT Version:  4.5.2
Kernel:      2.6.31-17-generic

Used versions
-----------------------
cdrecord: 1.1.9

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'MATSHITA'
Identification : 'DVD-RAM UJ892AS '
Revision       : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0012 (DVD-RAM) 
Profile: 0x002B (DVD+R/DL) 
Profile: 0x001B (DVD+R) 
Profile: 0x001A (DVD+RW) 
Profile: 0x0016 (DVD-R/DL layer jump recording) (current)
Profile: 0x0015 (DVD-R/DL sequential recording) (current)
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x000A (CD-RW) 
Profile: 0x0009 (CD-R) 
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
Drive buf size : 458752 = 448 KB
FIFO size      : 12582912 = 12288 KB
Speed set to 5540 KB/s
Track 01: data  6033 MB        
Total size:     6928 MB (686:26.30) = 3088973 sectors
Lout start:     6929 MB (686:28/23) = 3088973 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 4171712 Blocks current: 4171712 Blocks remaining: 1082739
Starting to write CD/DVD at speed   4.0 in real SAO mode for single session.
Last chance to quit, starting real write in    2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01:    0 of 6033 MB written.
Track 01:    1 of 6033 MB written (fifo 100%) [buf  99%]   0.1x.
Track 01:    2 of 6033 MB written (fifo 100%) [buf  99%]   1.0x.
Track 01:    3 of 6033 MB written (fifo 100%) [buf  99%]   2.1x.
Track 01:    4 of 6033 MB written (fifo 100%) [buf  98%]   2.0x.
Track 01:    5 of 6033 MB written (fifo 100%) [buf  98%]   2.1x.
Track 01:    6 of 6033 MB written (fifo 100%) [buf  98%]   2.0x.
Track 01:    7 of 6033 MB written (fifo 100%) [buf  98%]   2.1x.
Track 01:    8 of 6033 MB written (fifo 100%) [buf  97%]   2.0x.
Track 01:    9 of 6033 MB written (fifo 100%) [buf  97%]   2.1x.
Track 01:   10 of 6033 MB written (fifo 100%) [buf  97%]   2.0x.
Track 01:   11 of 6033 MB written (fifo 100%) [buf  97%]   2.1x.
Track 01:   12 of 6033 MB written (fifo 100%) [buf  96%]   2.0x.
Track 01:   13 of 6033 MB written (fifo 100%) [buf  96%]   2.1x.
Track 01:   14 of 6033 MB written (fifo 100%) [buf  96%]   2.0x.
Track 01:   15 of 6033 MB written (fifo 100%) [buf  96%]   2.1x.
Track 01:   16 of 6033 MB written (fifo 100%) [buf  95%]   2.0x.

I go to the end of output  again because it's too long!

Track 01: 6026 of 6033 MB written (fifo 100%) [buf  96%]   4.1x.
Track 01: 6027 of 6033 MB written (fifo 100%) [buf  96%]   4.2x.
Track 01: 6028 of 6033 MB written (fifo 100%) [buf  96%]   4.1x.
Track 01: 6029 of 6033 MB written (fifo 100%) [buf  82%]   3.9x.
Track 01: 6030 of 6033 MB written (fifo 100%) [buf  95%]   4.3x.
Track 01: 6031 of 6033 MB written (fifo 100%) [buf  95%]   4.2x.
Track 01: 6032 of 6033 MB written (fifo 100%) [buf  95%]   4.1x.
Track 01: 6033 of 6033 MB written (fifo 100%) [buf  95%]   4.2x.
Track 01: Total bytes read/written: 6326216704/6326216704 (3088973 sectors).
Writing  time: 1325.644s
Average write speed   3.5x.
Min drive buffer fill was 42%
Fixating...
Errno: 5 (Input/output error), flush cache scsi sendcmd: no error
CDB:  35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 03 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 201.293s timeout 200s
/usr/bin/wodim: Cannot fixate disk.
Trouble flushing the cache
Fixating time:  201.306s
/usr/bin/wodim: fifo had 99645 puts and 99645 gets.
/usr/bin/wodim: fifo was 0 times empty and 54467 times full, min fill was 94%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=4 -sao driveropts=burnfree -data -tsize=3088973s -


Please help me!

-- 
k3b1.68.0 fails to close the DVD dual-layer disk
https://bugs.launchpad.net/bugs/511526
You received this bug notification because you are a member of Kubuntu
Bugs, which is subscribed to k3b in ubuntu.




More information about the kubuntu-bugs mailing list