[Bug 250206] Re: k3b after burning a DVD the drive fails to respond
sponix2ipfw
sponix2ipfw at yahoo.com
Sun Jul 20 03:47:36 UTC 2008
** Description changed:
Binary package hint: k3b
After Burning a DVD the drive fails to respond, the OS can no longer
access the drive, to eject, read, etc. It is no longer listed in
cdrecord -scanbus, and so forth. This does not happen when burning a DVD
with Brasero... Seems someone else had a similar problem
http://www.timhardy.net/wordpress/bytopic/howto/ and was able to
establish a work-a-round, I have not been able to verify this the
directions are a bit vague.
Description: Ubuntu 8.04.1
k3b:
Installed: 1.0.4-2ubuntu4
Jul 19 22:38:30 sponix-desktop syslogd 1.5.0#1ubuntu1: restart.
Jul 19 22:55:11 sponix-desktop kernel: [ 8899.618030] cdb 28 00 00 00 00 10 00 00 01 00 00 00 00 00 00 00
Jul 19 22:55:11 sponix-desktop kernel: [ 8899.618031] res 40/00:02:00:48:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Jul 19 22:55:17 sponix-desktop kernel: [ 8902.163838] ata4: port is slow to respond, please be patient (Status 0xd0)
Jul 19 22:55:21 sponix-desktop kernel: [ 8904.402328] ata4: device not ready (errno=-16), forcing hardreset
Jul 19 22:55:21 sponix-desktop kernel: [ 8904.402335] ata4: hard resetting link
Jul 19 22:55:27 sponix-desktop kernel: [ 8907.026670] ata4: port is slow to respond, please be patient (Status 0x80)
Jul 19 22:55:31 sponix-desktop kernel: [ 8909.184761] ata4: hard resetting link
Jul 19 22:55:37 sponix-desktop kernel: [ 8911.809084] ata4: port is slow to respond, please be patient (Status 0x80)
Jul 19 22:55:42 sponix-desktop kernel: [ 8913.966706] ata4: hard resetting link
Jul 19 22:55:47 sponix-desktop kernel: [ 8916.591037] ata4: port is slow to respond, please be patient (Status 0x80)
Jul 19 22:56:17 sponix-desktop kernel: [ 8931.278603] ata4: limiting SATA link speed to 1.5 Gbps
Jul 19 22:56:17 sponix-desktop kernel: [ 8931.278606] ata4: hard resetting link
Jul 19 22:56:22 sponix-desktop kernel: [ 8933.663156] ata4.00: disabled
Jul 19 22:56:22 sponix-desktop kernel: [ 8933.663169] ata4: EH complete
- sudo lspci -v
- 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
- Subsystem: Hewlett-Packard Company Unknown device 2a61
- Flags: bus master, 66MHz, fast devsel, latency 0
+ lspci -vvnn
+ 00:00.0 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03ea] (rev a1)
+ Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
+ Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL-
+ Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
+ Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
+ Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
+ Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
+ Revision ID: 1.03
+ Link Frequency 0: 1.0GHz
+ Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
+ Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
+ Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
+ Link Frequency 1: 200MHz
+ Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
+ Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
+ Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
+ Prefetchable memory behind bridge Upper: 00-00
+ Bus Number: 00
Capabilities: [dc] HyperTransport: MSI Mapping
- 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
- Subsystem: Hewlett-Packard Company Unknown device 2a61
- Flags: bus master, 66MHz, fast devsel, latency 0
-
- 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
- Subsystem: Hewlett-Packard Company Unknown device 2a61
- Flags: 66MHz, fast devsel, IRQ 255
- I/O ports at fc00 [size=64]
- I/O ports at 1c00 [size=64]
- I/O ports at f400 [size=64]
- Capabilities: [44] Power Management version 2
-
- 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
- Subsystem: Hewlett-Packard Company Unknown device 2a61
- Flags: 66MHz, fast devsel
-
- 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 10 [OHCI])
- Subsystem: Hewlett-Packard Company Unknown device 2a61
- Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
- Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
- Capabilities: [44] Power Management version 2
-
- 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 20 [EHCI])
- Subsystem: Hewlett-Packard Company Unknown device 2a61
- Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
- Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
+ 00:01.0 ISA bridge [0601]: nVidia Corporation MCP61 LPC Bridge [10de:03e0] (rev a2)
+ Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+ Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 0
+
+ 00:01.1 SMBus [0c05]: nVidia Corporation MCP61 SMBus [10de:03eb] (rev a2)
+ Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+ Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Interrupt: pin A routed to IRQ 255
+ Region 0: I/O ports at fc00 [size=64]
+ Region 4: I/O ports at 1c00 [size=64]
+ Region 5: I/O ports at f400 [size=64]
+ Capabilities: [44] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+
+ 00:01.2 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03f5] (rev a2)
+ Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+ Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+
+ 00:02.0 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f1] (rev a3) (prog-if 10 [OHCI])
+ Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 0 (750ns min, 250ns max)
+ Interrupt: pin A routed to IRQ 16
+ Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
+ Capabilities: [44] Power Management version 2
+ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+
+ 00:02.1 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f2] (rev a3) (prog-if 20 [EHCI])
+ Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 0 (750ns min, 250ns max)
+ Interrupt: pin B routed to IRQ 17
+ Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2
-
- 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) (prog-if 01 [Subtractive decode])
- Flags: bus master, 66MHz, fast devsel, latency 0
+ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+
+ 00:04.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI bridge [10de:03f3] (rev a1) (prog-if 01 [Subtractive decode])
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fd800000-fd8fffff
Prefetchable memory behind bridge: fdf00000-fdffffff
- Capabilities: [b8] Subsystem: nVidia Corporation Unknown device cb84
+ Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
+ BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
+ Capabilities: [b8] Subsystem: nVidia Corporation Unknown device [10de:cb84]
Capabilities: [8c] HyperTransport: MSI Mapping
- 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
- Subsystem: Hewlett-Packard Company Unknown device 2a61
- Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
- Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
- Capabilities: [44] Power Management version 2
+ 00:05.0 Audio device [0403]: nVidia Corporation MCP61 High Definition Audio [10de:03f0] (rev a2)
+ Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 0 (500ns min, 1250ns max)
+ Interrupt: pin B routed to IRQ 17
+ Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
+ Capabilities: [44] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
+ Address: 0000000000000000 Data: 0000
+ Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping
- 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) (prog-if 8a [Master SecP PriP])
- Subsystem: Unknown device f03c:2a61
- Flags: bus master, 66MHz, fast devsel, latency 0
- [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
- [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
- [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
- [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
- I/O ports at f000 [size=16]
- Capabilities: [44] Power Management version 2
-
- 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
- Subsystem: Hewlett-Packard Company Unknown device 2a61
- Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 220
- Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
- I/O ports at ec00 [size=8]
- Capabilities: [44] Power Management version 2
+ 00:06.0 IDE interface [0101]: nVidia Corporation MCP61 IDE [10de:03ec] (rev a2) (prog-if 8a [Master SecP PriP])
+ Subsystem: Unknown device [f03c:2a61]
+ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 0 (750ns min, 250ns max)
+ Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
+ Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
+ Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
+ Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
+ Region 4: I/O ports at f000 [size=16]
+ Capabilities: [44] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+
+ 00:07.0 Bridge [0680]: nVidia Corporation MCP61 Ethernet [10de:03ef] (rev a2)
+ Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 0 (250ns min, 5000ns max)
+ Interrupt: pin A routed to IRQ 220
+ Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
+ Region 1: I/O ports at ec00 [size=8]
+ Capabilities: [44] Power Management version 2
+ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
+ Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+
+ Address: 00000000fee0300c Data: 4132
+ Masking: 000000fe Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping
- 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
- Subsystem: Hewlett-Packard Company Unknown device 2a61
- Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
- I/O ports at 09f0 [size=8]
- I/O ports at 0bf0 [size=4]
- I/O ports at 0970 [size=8]
- I/O ports at 0b70 [size=4]
- I/O ports at d800 [size=16]
- Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
- Capabilities: [44] Power Management version 2
+ 00:08.0 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
+ Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 0 (750ns min, 250ns max)
+ Interrupt: pin A routed to IRQ 21
+ Region 0: I/O ports at 09f0 [size=8]
+ Region 1: I/O ports at 0bf0 [size=4]
+ Region 2: I/O ports at 0970 [size=8]
+ Region 3: I/O ports at 0b70 [size=4]
+ Region 4: I/O ports at d800 [size=16]
+ Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
+ Capabilities: [44] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
+ Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping
- 00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
- Subsystem: Hewlett-Packard Company Unknown device 2a61
- Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
- I/O ports at 09e0 [size=8]
- I/O ports at 0be0 [size=4]
- I/O ports at 0960 [size=8]
- I/O ports at 0b60 [size=4]
- I/O ports at c400 [size=16]
- Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
- Capabilities: [44] Power Management version 2
+ 00:08.1 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
+ Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 0 (750ns min, 250ns max)
+ Interrupt: pin B routed to IRQ 21
+ Region 0: I/O ports at 09e0 [size=8]
+ Region 1: I/O ports at 0be0 [size=4]
+ Region 2: I/O ports at 0960 [size=8]
+ Region 3: I/O ports at 0b60 [size=4]
+ Region 4: I/O ports at c400 [size=16]
+ Region 5: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
+ Capabilities: [44] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
+ Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping
- 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
- Flags: bus master, fast devsel, latency 0
+ 00:09.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e8] (rev a2) (prog-if 00 [Normal decode])
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
- Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
+ Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
Capabilities: [48] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
+ Address: 00000000fee0300c Data: 41a9
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
-
- 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
- Flags: bus master, fast devsel, latency 0
+ Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
+ Device: Latency L0s <64ns, L1 <1us
+ Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
+ Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
+ Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
+ Link: Latency L0s <512ns, L1 <4us
+ Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
+ Link: Speed 2.5Gb/s, Width x16
+ Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
+ Slot: Number 1, PowerLimit 75.000000
+ Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
+ Slot: AttnInd Off, PwrInd On, Power-
+ Root: Correctable- Non-Fatal- Fatal- PME-
+
+ 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2) (prog-if 00 [Normal decode])
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
- Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
+ Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
Capabilities: [48] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
+ Address: 00000000fee0300c Data: 41b1
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
-
- 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
- Flags: bus master, fast devsel, latency 0
+ Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
+ Device: Latency L0s <64ns, L1 <1us
+ Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
+ Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
+ Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
+ Link: Latency L0s <512ns, L1 <4us
+ Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
+ Link: Speed 2.5Gb/s, Width x1
+ Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
+ Slot: Number 2, PowerLimit 10.000000
+ Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
+ Slot: AttnInd Off, PwrInd On, Power-
+ Root: Correctable- Non-Fatal- Fatal- PME-
+
+ 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2) (prog-if 00 [Normal decode])
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
- Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
+ Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
Capabilities: [48] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
+ Address: 00000000fee0300c Data: 41b9
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
-
- 00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6100 nForce 430 (rev a2) (prog-if 00 [VGA controller])
- Subsystem: Hewlett-Packard Company Unknown device 2a61
- Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
- Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
- Memory at e0000000 (64-bit, prefetchable) [size=256M]
- Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
+ Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
+ Device: Latency L0s <64ns, L1 <1us
+ Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
+ Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
+ Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
+ Link: Latency L0s <512ns, L1 <4us
+ Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
+ Link: Speed 2.5Gb/s, Width x1
+ Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
+ Slot: Number 3, PowerLimit 10.000000
+ Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
+ Slot: AttnInd Off, PwrInd On, Power-
+ Root: Correctable- Non-Fatal- Fatal- PME-
+
+ 00:0d.0 VGA compatible controller [0300]: nVidia Corporation GeForce 6100 nForce 430 [10de:03d0] (rev a2) (prog-if 00 [VGA controller])
+ Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 0
+ Interrupt: pin A routed to IRQ 16
+ Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
+ Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
+ Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at 88000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
-
- 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
- Flags: fast devsel
+ Address: 0000000000000000 Data: 0000
+
+ 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
+ Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
-
- 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
- Flags: fast devsel
-
- 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
- Flags: fast devsel
-
- 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
- Flags: fast devsel
+ !!! Possibly incomplete decoding
+ Command: WarmRst+ DblEnd-
+ Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
+ Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
+ Revision ID: 1.02
+
+ 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
+ Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+
+ 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
+ Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+
+ 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
+ Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [f0] #0f [0010]
- 01:05.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
- Subsystem: ADMtek Unknown device 0574
- Flags: bus master, medium devsel, latency 255, IRQ 19
- I/O ports at bc00 [size=256]
- Memory at fd8ff000 (32-bit, non-prefetchable) [size=1K]
+ 01:05.0 Ethernet controller [0200]: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 [1317:0985] (rev 11)
+ Subsystem: ADMtek Unknown device [1317:0574]
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 255 (63750ns min, 63750ns max), Cache Line Size: 64 bytes
+ Interrupt: pin A routed to IRQ 20
+ Region 0: I/O ports at bc00 [size=256]
+ Region 1: Memory at fd8ff000 (32-bit, non-prefetchable) [size=1K]
[virtual] Expansion ROM at fdf00000 [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
-
- 01:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
- Subsystem: Hewlett-Packard Company Unknown device 2a61
- Flags: bus master, stepping, medium devsel, latency 64, IRQ 21
- Memory at fd8fe000 (32-bit, non-prefetchable) [size=2K]
- I/O ports at b800 [size=128]
+ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+
+ 01:09.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
+ Subsystem: Hewlett-Packard Company Unknown device [103c:2a61]
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 64 (8000ns max), Cache Line Size: 64 bytes
+ Interrupt: pin A routed to IRQ 18
+ Region 0: Memory at fd8fe000 (32-bit, non-prefetchable) [size=2K]
+ Region 1: I/O ports at b800 [size=128]
Capabilities: [50] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+
ProblemType: Bug
Architecture: i386
Date: Sat Jul 19 22:24:51 2008
DistroRelease: Ubuntu 8.04
NonfreeKernelModules: nvidia
Package: k3b 1.0.4-2ubuntu4
PackageArchitecture: i386
ProcEnviron:
SHELL=/bin/bash
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
LANG=en_US.UTF-8
SourcePackage: k3b
Uname: Linux 2.6.24-19-generic i686
--
k3b after burning a DVD the drive fails to respond
https://bugs.launchpad.net/bugs/250206
You received this bug notification because you are a member of Kubuntu
Team, which is subscribed to k3b in ubuntu.
More information about the kubuntu-bugs
mailing list