[Bug 3731] Re: Xorg resolution falling back to 640x480 and/or 800x600 when h/v freqs incorrect
blokeinlondon
aston_guy at hotmail.com
Wed Nov 21 11:48:50 UTC 2007
Thanks very much Bryce
Here is the correct info
parse-edid: parse-edid version 1.4.1
get-edid: get-edid version 1.4.1
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful
VBE version 300
VBE string at 0x11110 "NVidia"
VBE/DDC service about to be called
Report DDC capabilities
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful
Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination supports DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer
Reading next EDID block
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call successful
parse-edid: EDID checksum passed.
# EDID version 1 revision 1
Section "Monitor"
# Block type: 2:0 3:fc
Identifier "GATEWAY CS700"
VendorName "GWY"
ModelName "GATEWAY CS700"
# Block type: 2:0 3:fc
# Block type: 2:0 3:fd
HorizSync 30-70
VertRefresh 50-120
# Max dot clock not given
# DPMS capabilities: Active off:yes Suspend:yes Standby:no
Mode "800x600" # vfreq 85.061Hz, hfreq 53.674kHz
DotClock 56.250000
HTimings 800 832 896 1048
VTimings 600 601 604 631
Flags "+HSync" "+VSync"
EndMode
Mode "800x600" # vfreq 75.000Hz, hfreq 46.875kHz
DotClock 49.500000
HTimings 800 816 896 1056
VTimings 600 601 604 625
Flags "+HSync" "+VSync"
EndMode
# Block type: 2:0 3:fc
# Block type: 2:0 3:fd
EndSection
--
Xorg resolution falling back to 640x480 and/or 800x600 when h/v freqs incorrect
https://bugs.launchpad.net/bugs/3731
You received this bug notification because you are a member of Kubuntu
Team, which is a subscriber of a duplicate bug.
More information about the kubuntu-bugs
mailing list