[Bug 38692] Re: systemsettings doesn't load Display, Disk and Filesystems control module
Paul Grant
paulgrant at gmail.com
Sun May 7 02:40:01 UTC 2006
I should point out that I'm running Dapper beta on an x86 machine, if that makes any difference.
Here's the output of /usr/sbin/ddcprobe:
paul at ubuntu:~$ sudo /usr/sbin/ddcprobe
Password:
vbe: VESA 2.0 detected.
oem: ATI RADEON 9200
memory: 16384kb
mode: 800x600x16
mode: 1024x768x16
mode: 320x200x32k
mode: 320x200x64k
mode: 320x200x16m
mode: 1600x1200x256
mode: 640x400x256
mode: 640x480x256
mode: 640x480x32k
mode: 640x480x64k
mode: 640x480x16m
mode: 1600x1200x32k
mode: 800x600x256
mode: 800x600x32k
mode: 800x600x64k
mode: 800x600x16m
mode: 1600x1200x64k
mode: 1024x768x256
mode: 1024x768x32k
mode: 1024x768x64k
mode: 1024x768x16m
mode: 1280x1024x256
mode: 1280x1024x32k
mode: 1280x1024x64k
mode: 1280x1024x16m
mode: 132x25 (text)
mode: 132x43 (text)
edid:
edid: 1 1
id: d569
eisa: AOCd569
serial: 04cd2c99
manufacture: 5 1998
input: sync on green, analog signal.
screensize: 28 21
gamma: 2.600000
dpms: RGB, active off, suspend, standby
timing: 640x480 at 60 Hz (VGA)
timing: 640x480 at 75 Hz (VESA)
timing: 800x600 at 60 Hz (VESA)
timing: 800x600 at 75 Hz (VESA)
timing: 1024x768 at 75 Hz (VESA)
ctiming: 640x480 at 85
ctiming: 800x600 at 85
ctiming: 1024x768 at 85
dtiming: 640x480 at 85
dtiming: 800x600 at 85
dtiming: 1280x1024 at 70
dtiming: 800x600 at 85
Here's the /etc/xorg.conf file:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig Screen 0" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 51.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig Monitor 0"
EndSection
Section "Device"
Identifier "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
Driver "i810"
BusID "PCI:0:2:0"
EndSection
Section "Device"
Identifier "ATI Graphics Adapter 0"
Driver "fglrx"
Option "(null)"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
BusID "PCI:1:9:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig Screen 0"
Device "ATI Graphics Adapter 0"
Monitor "aticonfig Monitor 0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
I'm using an ATI Radeon 9250 (PCI) with 256MB RAM and an AOC Spectrum 5VIr monitor. This motherboard also has an onboard video chip which I am not using and should be disabled.
--
systemsettings doesn't load Display, Disk and Filesystems control module
https://launchpad.net/bugs/38692
More information about the kubuntu-bugs
mailing list