[    0.000000] Linux version 2.6.20-14-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Mon Apr 2 16:32:46 UTC 2007 (Ubuntu 2.6.20-14.22-generic)
[    0.000000] Command line: root=/dev/mapper/zeusroot-feisty ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bbff0000 (usable)
[    0.000000]  BIOS-e820: 00000000bbff0000 - 00000000bbff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bbff3000 - 00000000bc000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bc000000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 770032) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 GBT                                   ) @ 0x00000000000f6c40
[    0.000000] ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x00000000bbff3000
[    0.000000] ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x00000000bbff3040
[    0.000000] ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x00000000bbff7a40
[    0.000000] ACPI: MCFG (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x00000000bbff7c40
[    0.000000] ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x00000000bbff79c0
[    0.000000] ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of nodes 1
[    0.000000] Node 0 MemBase 0000000000000000 Limit 00000000bbff0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 770032) 1 entries of 3200 used
[    0.000000] NUMA: Using 63 for the hash shift.
[    0.000000] Using node hash shift of 63
[    0.000000] Bootmem setup node 0 0000000000000000-00000000bbff0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   770032
[    0.000000] On node 0 totalpages: 769935
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1087 pages reserved
[    0.000000]   DMA zone: 2856 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10471 pages used for memmap
[    0.000000]   DMA32 zone: 755465 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to physical flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[    0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000
[    0.000000] Nosave address range: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 34048 bytes of per cpu data
[    0.000000] Built 1 zonelists.  Total pages: 758321
[    0.000000] Kernel command line: root=/dev/mapper/zeusroot-feisty ro quiet
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[   26.760246] Console: colour VGA+ 80x25
[   26.762712] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   26.766541] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   26.767822] Checking aperture...
[   26.767827] CPU 0: aperture @ 8478000000 size 32 MB
[   26.767829] Aperture too small (32 MB)
[   26.774480] No AGP bridge found
[   26.806382] Memory: 3019352k/3080128k available (2217k kernel code, 60388k reserved, 1162k data, 304k init)
[   26.883260] Calibrating delay using timer specific routine.. 4021.90 BogoMIPS (lpj=8043816)
[   26.883313] Security Framework v1.0.0 initialized
[   26.883317] SELinux:  Disabled at boot.
[   26.883340] Mount-cache hash table entries: 256
[   26.883469] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   26.883471] CPU: L2 Cache: 512K (64 bytes/line)
[   26.883473] CPU 0/0 -> Node 0
[   26.883475] CPU: Physical Processor ID: 0
[   26.883477] CPU: Processor Core ID: 0
[   26.883496] SMP alternatives: switching to UP code
[   26.883720] Early unpacking initramfs... done
[   27.219135] ACPI: Core revision 20060707
[   27.222364] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   27.266770] Using local APIC timer interrupts.
[   27.316481] result 12557486
[   27.316483] Detected 12.557 MHz APIC timer.
[   27.318920] SMP alternatives: switching to SMP code
[   27.319026] Booting processor 1/2 APIC 0x1
[   27.328270] Initializing CPU#1
[   27.405585] Calibrating delay using timer specific routine.. 4018.57 BogoMIPS (lpj=8037150)
[   27.405591] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   27.405593] CPU: L2 Cache: 512K (64 bytes/line)
[   27.405596] CPU 1/1 -> Node 0
[   27.405598] CPU: Physical Processor ID: 0
[   27.405599] CPU: Processor Core ID: 1
[   27.405680] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[   27.409586] CPU 1: Syncing TSC to CPU 0.
[   27.410693] CPU 1: synchronized TSC with CPU 0 (last diff -1 cycles, maxerr 519 cycles)
[   27.410703] Brought up 2 CPUs
[   27.410771] Disabling vsyscall due to use of PM timer
[   27.410774] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
[   27.410776] time.c: Detected 2009.198 MHz processor.
[   28.280674] migration_cost=306
[   28.280992] Time:  1:35:22  Date: 03/14/107
[   28.281029] NET: Registered protocol family 16
[   28.281110] ACPI: bus type pci registered
[   28.281115] PCI: Using configuration type 1
[   28.289263] ACPI: Interpreter enabled
[   28.289266] ACPI: Using IOAPIC for interrupt routing
[   28.289819] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   28.289823] PCI: Probing PCI hardware (bus 00)
[   28.290225] Boot video device is 0000:00:05.0
[   28.290964] PCI: Transparent bridge - 0000:00:10.0
[   28.291002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   28.398869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   28.400598] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   28.400914] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   28.401230] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
[   28.401558] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   28.401875] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   28.402189] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   28.402503] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
[   28.402815] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   28.403130] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[   28.403444] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   28.403760] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[   28.404076] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   28.404392] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[   28.404705] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   28.405020] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   28.405336] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[   28.405659] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[   28.405972] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   28.406291] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[   28.406610] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[   28.407027] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[   28.407431] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[   28.407834] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[   28.408236] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[   28.408639] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[   28.409046] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[   28.409452] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[   28.409855] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[   28.410257] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[   28.410660] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[   28.411063] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[   28.411467] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[   28.411873] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[   28.412276] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
[   28.412679] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[   28.413080] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[   28.413532] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[   28.413936] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[   28.414337] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[   28.414742] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[   28.415144] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[   28.417709] Linux Plug and Play Support v0.97 (c) Adam Belay
[   28.417720] pnp: PnP ACPI init
[   28.423350] pnp: PnP ACPI: found 12 devices
[   28.423404] PCI: Using ACPI for IRQ routing
[   28.423410] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   28.423496] NET: Registered protocol family 8
[   28.423498] NET: Registered protocol family 20
[   28.424155] pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
[   28.424158] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[   28.424163] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[   28.424166] pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
[   28.424169] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[   28.424172] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[   28.424175] pnp: 00:01: ioport range 0x2000-0x207f has been reserved
[   28.424178] pnp: 00:01: ioport range 0x2080-0x20ff has been reserved
[   28.424481] PCI: Bridge: 0000:00:02.0
[   28.424484]   IO window: 8000-8fff
[   28.424486]   MEM window: disabled.
[   28.424488]   PREFETCH window: disabled.
[   28.424491] PCI: Bridge: 0000:00:03.0
[   28.424493]   IO window: 9000-9fff
[   28.424495]   MEM window: disabled.
[   28.424497]   PREFETCH window: disabled.
[   28.424499] PCI: Bridge: 0000:00:04.0
[   28.424501]   IO window: a000-afff
[   28.424503]   MEM window: disabled.
[   28.424505]   PREFETCH window: disabled.
[   28.424507] PCI: Bridge: 0000:00:10.0
[   28.424508]   IO window: disabled.
[   28.424512]   MEM window: f5000000-f50fffff
[   28.424515]   PREFETCH window: disabled.
[   28.424525] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   28.424531] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   28.424537] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   28.424544] PCI: Setting latency timer of device 0000:00:10.0 to 64
[   28.424626] NET: Registered protocol family 2
[   28.461291] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   28.461944] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[   28.464533] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   28.465184] TCP: Hash tables configured (established 262144 bind 65536)
[   28.465187] TCP reno registered
[   28.477331] checking if image is initramfs... it is
[   29.109348] Freeing initrd memory: 7555k freed
[   29.114526] audit: initializing netlink socket (disabled)
[   29.114540] audit(1176514522.320:1): initialized
[   29.114728] VFS: Disk quotas dquot_6.5.1
[   29.114747] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   29.114794] io scheduler noop registered
[   29.114796] io scheduler anticipatory registered
[   29.114798] io scheduler deadline registered
[   29.114813] io scheduler cfq registered (default)
[   29.115032] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   29.115052] assign_interrupt_mode Found MSI capability
[   29.115055] Allocate Port Service[0000:00:02.0:pcie00]
[   29.115121] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   29.115139] assign_interrupt_mode Found MSI capability
[   29.115141] Allocate Port Service[0000:00:03.0:pcie00]
[   29.115204] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   29.115222] assign_interrupt_mode Found MSI capability
[   29.115225] Allocate Port Service[0000:00:04.0:pcie00]
[   29.140263] Real Time Clock Driver v1.12ac
[   29.140307] Linux agpgart interface v0.102 (c) Dave Jones
[   29.140309] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   29.140447] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   29.140601] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   29.141060] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   29.141283] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   29.141483] mice: PS/2 mouse device common for all mice
[   29.142084] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   29.142237] input: Macintosh mouse button emulation as /class/input/input0
[   29.142271] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   29.142275] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   29.142458] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   29.142460] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   29.145732] serio: i8042 KBD port at 0x60,0x64 irq 1
[   29.145824] TCP cubic registered
[   29.145834] NET: Registered protocol family 1
[   29.145910] ACPI: (supports S0 S1 S4 S5)
[   29.145961]   Magic number: 3:171:559
[   29.146023]   hash matches device ptya5
[   29.146079] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   29.146154] Freeing unused kernel memory: 304k freed
[   29.174065] input: AT Translated Set 2 keyboard as /class/input/input1
[   29.299289] Capability LSM initialized
[   29.312618] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[   29.783750] usbcore: registered new interface driver usbfs
[   29.783775] usbcore: registered new interface driver hub
[   29.783799] usbcore: registered new device driver usb
[   29.784537] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   29.785073] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[   29.785080] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
[   29.785096] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   29.785099] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[   29.785223] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[   29.785240] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xf5108000
[   29.806186] SCSI subsystem initialized
[   29.849788] usb usb1: configuration #1 chosen from 1 choice
[   29.849812] hub 1-0:1.0: USB hub found
[   29.849823] hub 1-0:1.0: 8 ports detected
[   29.850774] ieee1394: Initialized config rom entry `ip1394'
[   29.856295] libata version 2.20 loaded.
[   29.893618] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[   29.956535] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[   29.956546] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22
[   29.956553] PCI: Setting latency timer of device 0000:00:14.0 to 64
[   29.956564] forcedeth: using HIGHDMA
[   30.262860] usb 1-1: new low speed USB device using ohci_hcd and address 2
[   30.468903] usb 1-1: configuration #1 chosen from 1 choice
[   30.478853] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:14.0
[   30.479714] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[   30.479723] ACPI: PCI Interrupt 0000:01:0e.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[   30.487051] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[   30.487058] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 21
[   30.487074] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[   30.487077] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[   30.487106] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[   30.487134] ehci_hcd 0000:00:0b.1: debug port 1
[   30.487138] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[   30.487148] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xf5104000
[   30.487156] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   30.487190] usb 1-1: USB disconnect, address 2
[   30.487357] usb usb2: configuration #1 chosen from 1 choice
[   30.487378] hub 2-0:1.0: USB hub found
[   30.487385] hub 2-0:1.0: 8 ports detected
[   30.529875] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[f5004000-f50047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   30.594645] sata_nv 0000:00:0e.0: version 3.3
[   30.595126] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[   30.595132] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
[   30.595157] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   30.595219] ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001d800 irq 20
[   30.595244] ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001d808 irq 20
[   30.595256] scsi0 : sata_nv
[   30.810156] usbcore: registered new interface driver hiddev
[   31.065829] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   31.077949] ata1.00: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
[   31.077952] ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   31.089928] ata1.00: configured for UDMA/133
[   31.089938] scsi1 : sata_nv
[   31.113747] usb 1-1: new low speed USB device using ohci_hcd and address 3
[   31.319770] usb 1-1: configuration #1 chosen from 1 choice
[   31.329796] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[   31.329814] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-1
[   31.329828] usbcore: registered new interface driver usbhid
[   31.329831] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   31.405367] ata2: SATA link down (SStatus 0 SControl 300)
[   31.415850] ATA: abnormal status 0x7F on port 0x0000000000010977
[   31.415965] scsi 0:0:0:0: Direct-Access     ATA      ST3250620AS      3.AA PQ: 0 ANSI: 5
[   31.416797] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[   31.416801] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
[   31.416827] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[   31.416869] ata3: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001c400 irq 23
[   31.416897] ata4: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001c408 irq 23
[   31.416908] scsi2 : sata_nv
[   31.728942] ata3: SATA link down (SStatus 0 SControl 300)
[   31.739422] ATA: abnormal status 0x7F on port 0x00000000000109e7
[   31.739434] scsi3 : sata_nv
[   31.809011] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000fea00005d82d3]
[   32.052520] ata4: SATA link down (SStatus 0 SControl 300)
[   32.063002] ATA: abnormal status 0x7F on port 0x0000000000010967
[   32.065435] pata_amd 0000:00:0d.0: version 0.2.8
[   32.065466] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   32.065500] ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14
[   32.065526] ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15
[   32.065548] scsi4 : pata_amd
[   32.235337] ATA: abnormal status 0x7F on port 0x00000000000101f7
[   32.235355] scsi5 : pata_amd
[   32.403111] ATA: abnormal status 0x7F on port 0x0000000000010177
[   32.410325] SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB)
[   32.410339] sda: Write Protect is off
[   32.410341] sda: Mode Sense: 00 3a 00 00
[   32.410355] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.410402] SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB)
[   32.410411] sda: Write Protect is off
[   32.410413] sda: Mode Sense: 00 3a 00 00
[   32.410425] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.410429]  sda: sda1 sda2 sda3 sda4
[   32.428322] sd 0:0:0:0: Attached scsi disk sda
[   32.431778] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   48.335773] device-mapper: ioctl: unable to remove open device temporary-cryptsetup-2402
[   48.602710] device-mapper: table: 254:5: snapshot-origin: unknown target type
[   48.602746] device-mapper: ioctl: error adding target to table
[   48.807298] Attempting manual resume
[   48.807302] swsusp: Resume From Partition 8:2
[   48.807304] PM: Checking swsusp image.
[   48.814779] PM: Resume from disk failed.
[   48.888291] kjournald starting.  Commit interval 5 seconds
[   48.888303] EXT3-fs: mounted filesystem with ordered data mode.
[   59.527310] NET: Registered protocol family 17
[   59.674293] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   59.713413] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   59.845744] nvidia: module license 'NVIDIA' taints kernel.
[   60.116475] parport: PnPBIOS parport detected.
[   60.116527] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   60.222365] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[   60.222374] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16
[   60.222381] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   60.222589] NVRM: loading NVIDIA Linux x86_64 Kernel Module  1.0-9631  Thu Nov  9 17:35:27 PST 2006
[   60.447302] input: PC Speaker as /class/input/input3
[   60.609828] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[   60.609864] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c80
[   61.121487] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   61.121492] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
[   61.121513] PCI: Setting latency timer of device 0000:00:10.1 to 64
[   61.322460] device-mapper: table: 254:5: snapshot-origin: unknown target type
[   61.322512] device-mapper: ioctl: error adding target to table
[   61.338173] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   61.606280] lp0: using parport0 (interrupt-driven).
[   61.809912] EXT3 FS on dm-6, internal journal
[   62.150649] NET: Registered protocol family 10
[   62.150753] lo: Disabled Privacy Extensions
[   68.850141] device-mapper: table: 254:5: snapshot-origin: unknown target type
[   68.850193] device-mapper: ioctl: error adding target to table
[   69.104537] kjournald starting.  Commit interval 5 seconds
[   69.104644] EXT3 FS on sda1, internal journal
[   69.104649] EXT3-fs: mounted filesystem with ordered data mode.
[   69.107818] kjournald starting.  Commit interval 5 seconds
[   69.108008] EXT3 FS on dm-3, internal journal
[   69.108012] EXT3-fs: mounted filesystem with ordered data mode.
[   69.137867] kjournald starting.  Commit interval 5 seconds
[   69.138062] EXT3 FS on dm-7, internal journal
[   69.138066] EXT3-fs: mounted filesystem with ordered data mode.
[   69.184044] Adding 1951888k swap on /dev/mapper/swap.  Priority:-1 extents:1 across:1951888k
[   69.344537] tun: Universal TUN/TAP device driver, 1.6
[   69.344541] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   69.364465] device kvm-devel entered promiscuous mode
[   69.364474] audit(1176514562.966:2): dev=kvm-devel prom=256 old_prom=0 auid=4294967295
[   69.397705] device kvm-oracle entered promiscuous mode
[   69.397715] audit(1176514563.002:3): dev=kvm-oracle prom=256 old_prom=0 auid=4294967295
[   69.433239] device kvm-okuma entered promiscuous mode
[   69.433251] audit(1176514563.034:4): dev=kvm-okuma prom=256 old_prom=0 auid=4294967295
[   69.599199] Bridge firewalling registered
[   69.608622] br0: port 3(kvm-okuma) entering learning state
[   69.608628] br0: port 2(kvm-oracle) entering learning state
[   69.608633] br0: port 1(kvm-devel) entering learning state
[   72.435480] eth0: no IPv6 routers present
[   78.595418] br0: topology change detected, propagating
[   78.595423] br0: port 3(kvm-okuma) entering forwarding state
[   78.595426] br0: topology change detected, propagating
[   78.595428] br0: port 2(kvm-oracle) entering forwarding state
[   78.595430] br0: topology change detected, propagating
[   78.595432] br0: port 1(kvm-devel) entering forwarding state
[   79.414504] kvm-devel: no IPv6 routers present
[   80.189493] kvm-oracle: no IPv6 routers present
[   80.345127] kvm-okuma: no IPv6 routers present
[   80.385074] br0: no IPv6 routers present
[   82.140000] Using specific hotkey driver
[   82.196821] No dock devices found.
[   82.218827] ibm_acpi: ec object not found
[   82.295507] input: Power Button (FF) as /class/input/input4
[   82.295754] ACPI: Power Button (FF) [PWRF]
[   82.296927] input: Power Button (CM) as /class/input/input5
[   82.297173] ACPI: Power Button (CM) [PWRB]
[   82.406276] pcc_acpi: loading...
[   82.614717] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00)
[   82.614924] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0xa
[   82.614929] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xc
[   82.614931] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
[   95.121880] ppdev: user-space parallel port driver
[   96.380509] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 0:05.0] forgot to specify physical device; fix it!
[   96.381053] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 0:05.0] forgot to specify physical device; fix it!
[   96.381487] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 0:05.0] forgot to specify physical device; fix it!
[   97.078806] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   97.184664] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   97.192696] NFSD: starting 90-second grace period
[   98.758604] Bluetooth: Core ver 2.11
[   98.758661] NET: Registered protocol family 31
[   98.758664] Bluetooth: HCI device and connection manager initialized
[   98.758669] Bluetooth: HCI socket layer initialized
[   98.789216] Bluetooth: L2CAP ver 2.8
[   98.789220] Bluetooth: L2CAP socket layer initialized
[   98.798036] Bluetooth: RFCOMM socket layer initialized
[   98.798052] Bluetooth: RFCOMM TTY layer initialized
[   98.798054] Bluetooth: RFCOMM ver 1.8
[  103.989435] eth0: no IPv6 routers present
