[    0.000000] Linux version 2.6.20-15-generic (root@crested) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Fri Apr 13 20:39:41 UTC 2007 (Ubuntu 2.6.20-15.25-generic)
[    0.000000] Command line: root=/dev/mapper/zeusroot-feisty ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bbff0000 (usable)
[    0.000000]  BIOS-e820: 00000000bbff0000 - 00000000bbff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bbff3000 - 00000000bc000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bc000000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 770032) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 GBT                                   ) @ 0x00000000000f6c40
[    0.000000] ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x00000000bbff3000
[    0.000000] ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x00000000bbff3040
[    0.000000] ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x00000000bbff7a40
[    0.000000] ACPI: MCFG (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x00000000bbff7c40
[    0.000000] ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x00000000bbff79c0
[    0.000000] ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of nodes 1
[    0.000000] Node 0 MemBase 0000000000000000 Limit 00000000bbff0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 770032) 1 entries of 3200 used
[    0.000000] NUMA: Using 63 for the hash shift.
[    0.000000] Using node hash shift of 63
[    0.000000] Bootmem setup node 0 0000000000000000-00000000bbff0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   770032
[    0.000000] On node 0 totalpages: 769935
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1087 pages reserved
[    0.000000]   DMA zone: 2856 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10471 pages used for memmap
[    0.000000]   DMA32 zone: 755465 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to physical flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[    0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000
[    0.000000] Nosave address range: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 34048 bytes of per cpu data
[    0.000000] Built 1 zonelists.  Total pages: 758321
[    0.000000] Kernel command line: root=/dev/mapper/zeusroot-feisty ro quiet
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[   35.765439] Console: colour VGA+ 80x25
[   35.767903] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   35.771738] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   35.773027] Checking aperture...
[   35.773032] CPU 0: aperture @ 8478000000 size 32 MB
[   35.773034] Aperture too small (32 MB)
[   35.779661] No AGP bridge found
[   35.811550] Memory: 3019352k/3080128k available (2217k kernel code, 60388k reserved, 1162k data, 304k init)
[   35.888460] Calibrating delay using timer specific routine.. 4021.89 BogoMIPS (lpj=8043790)
[   35.888514] Security Framework v1.0.0 initialized
[   35.888518] SELinux:  Disabled at boot.
[   35.888540] Mount-cache hash table entries: 256
[   35.888671] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   35.888673] CPU: L2 Cache: 512K (64 bytes/line)
[   35.888675] CPU 0/0 -> Node 0
[   35.888677] CPU: Physical Processor ID: 0
[   35.888679] CPU: Processor Core ID: 0
[   35.888698] SMP alternatives: switching to UP code
[   35.888921] Early unpacking initramfs... done
[   36.224430] ACPI: Core revision 20060707
[   36.227639] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   36.272078] Using local APIC timer interrupts.
[   36.321787] result 12557280
[   36.321789] Detected 12.557 MHz APIC timer.
[   36.324121] SMP alternatives: switching to SMP code
[   36.324225] Booting processor 1/2 APIC 0x1
[   36.333468] Initializing CPU#1
[   36.410785] Calibrating delay using timer specific routine.. 4018.64 BogoMIPS (lpj=8037295)
[   36.410791] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   36.410793] CPU: L2 Cache: 512K (64 bytes/line)
[   36.410796] CPU 1/1 -> Node 0
[   36.410798] CPU: Physical Processor ID: 0
[   36.410799] CPU: Processor Core ID: 1
[   36.410880] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[   36.414787] CPU 1: Syncing TSC to CPU 0.
[   36.415895] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 517 cycles)
[   36.415905] Brought up 2 CPUs
[   36.415972] Disabling vsyscall due to use of PM timer
[   36.415975] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
[   36.415977] time.c: Detected 2009.162 MHz processor.
[   37.286224] migration_cost=259
[   37.286542] Time: 18:39:06  Date: 03/14/107
[   37.286578] NET: Registered protocol family 16
[   37.286654] ACPI: bus type pci registered
[   37.286663] PCI: Using configuration type 1
[   37.294757] ACPI: Interpreter enabled
[   37.294760] ACPI: Using IOAPIC for interrupt routing
[   37.295287] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   37.295291] PCI: Probing PCI hardware (bus 00)
[   37.295691] Boot video device is 0000:00:05.0
[   37.296434] PCI: Transparent bridge - 0000:00:10.0
[   37.296471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   37.402909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   37.404619] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   37.404932] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   37.405247] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
[   37.405556] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   37.405866] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   37.406175] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   37.406492] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
[   37.406817] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   37.407126] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[   37.407437] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   37.407751] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[   37.408060] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   37.408372] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[   37.408686] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   37.408997] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   37.409309] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[   37.409626] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[   37.409936] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   37.410250] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[   37.410572] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[   37.410988] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[   37.411387] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[   37.411786] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[   37.412183] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[   37.412583] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[   37.412980] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[   37.413382] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[   37.413783] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[   37.414181] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[   37.414586] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[   37.414986] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[   37.415385] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[   37.415785] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[   37.416185] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
[   37.416588] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[   37.416987] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[   37.417385] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[   37.417785] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[   37.418184] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[   37.418638] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[   37.419038] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[   37.421567] Linux Plug and Play Support v0.97 (c) Adam Belay
[   37.421583] pnp: PnP ACPI init
[   37.427130] pnp: PnP ACPI: found 12 devices
[   37.427188] PCI: Using ACPI for IRQ routing
[   37.427192] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   37.427278] NET: Registered protocol family 8
[   37.427280] NET: Registered protocol family 20
[   37.427929] pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
[   37.427933] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[   37.427938] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[   37.427941] pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
[   37.427944] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[   37.427946] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[   37.427949] pnp: 00:01: ioport range 0x2000-0x207f has been reserved
[   37.427952] pnp: 00:01: ioport range 0x2080-0x20ff has been reserved
[   37.428254] PCI: Bridge: 0000:00:02.0
[   37.428256]   IO window: 8000-8fff
[   37.428259]   MEM window: disabled.
[   37.428261]   PREFETCH window: disabled.
[   37.428263] PCI: Bridge: 0000:00:03.0
[   37.428265]   IO window: 9000-9fff
[   37.428267]   MEM window: disabled.
[   37.428269]   PREFETCH window: disabled.
[   37.428271] PCI: Bridge: 0000:00:04.0
[   37.428273]   IO window: a000-afff
[   37.428275]   MEM window: disabled.
[   37.428277]   PREFETCH window: disabled.
[   37.428279] PCI: Bridge: 0000:00:10.0
[   37.428281]   IO window: disabled.
[   37.428284]   MEM window: f5000000-f50fffff
[   37.428287]   PREFETCH window: disabled.
[   37.428297] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   37.428303] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   37.428309] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   37.428316] PCI: Setting latency timer of device 0000:00:10.0 to 64
[   37.428398] NET: Registered protocol family 2
[   37.466492] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   37.467145] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[   37.469735] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   37.470386] TCP: Hash tables configured (established 262144 bind 65536)
[   37.470389] TCP reno registered
[   37.482531] checking if image is initramfs... it is
[   38.111293] Freeing initrd memory: 7554k freed
[   38.116463] audit: initializing netlink socket (disabled)
[   38.116477] audit(1176575946.316:1): initialized
[   38.116658] VFS: Disk quotas dquot_6.5.1
[   38.116678] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   38.116723] io scheduler noop registered
[   38.116725] io scheduler anticipatory registered
[   38.116727] io scheduler deadline registered
[   38.116741] io scheduler cfq registered (default)
[   38.116959] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   38.116979] assign_interrupt_mode Found MSI capability
[   38.116982] Allocate Port Service[0000:00:02.0:pcie00]
[   38.117046] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   38.117064] assign_interrupt_mode Found MSI capability
[   38.117066] Allocate Port Service[0000:00:03.0:pcie00]
[   38.117127] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   38.117145] assign_interrupt_mode Found MSI capability
[   38.117147] Allocate Port Service[0000:00:04.0:pcie00]
[   38.142008] Real Time Clock Driver v1.12ac
[   38.142052] Linux agpgart interface v0.102 (c) Dave Jones
[   38.142055] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   38.142186] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   38.142337] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   38.142797] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   38.143018] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   38.143215] mice: PS/2 mouse device common for all mice
[   38.143798] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   38.143944] input: Macintosh mouse button emulation as /class/input/input0
[   38.143977] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   38.143980] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   38.144165] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   38.144168] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   38.148261] serio: i8042 KBD port at 0x60,0x64 irq 1
[   38.148352] TCP cubic registered
[   38.148362] NET: Registered protocol family 1
[   38.148435] ACPI: (supports S0 S1 S4 S5)
[   38.148483]   Magic number: 3:82:696
[   38.148600]   hash matches device 0000:00:00.1
[   38.148603] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   38.148680] Freeing unused kernel memory: 304k freed
[   38.176612] input: AT Translated Set 2 keyboard as /class/input/input1
[   38.302326] Capability LSM initialized
[   38.315543] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[   56.642203] SCSI subsystem initialized
[   56.647401] libata version 2.20 loaded.
[   69.495178] usbcore: registered new interface driver usbfs
[   69.495201] usbcore: registered new interface driver hub
[   69.495224] usbcore: registered new device driver usb
[   69.495972] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   69.496445] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[   69.496451] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
[   69.496466] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   69.496469] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[   69.496588] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[   69.496605] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xf5108000
[   69.557383] usb usb1: configuration #1 chosen from 1 choice
[   69.557410] hub 1-0:1.0: USB hub found
[   69.557420] hub 1-0:1.0: 8 ports detected
[   69.564717] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[   69.574946] ieee1394: Initialized config rom entry `ip1394'
[   69.661585] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[   69.661593] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
[   69.661608] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[   69.661611] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[   69.661812] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[   69.661844] ehci_hcd 0000:00:0b.1: debug port 1
[   69.661848] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[   69.661859] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xf5104000
[   69.661867] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   69.662435] usb usb2: configuration #1 chosen from 1 choice
[   69.662651] hub 2-0:1.0: USB hub found
[   69.662660] hub 2-0:1.0: 8 ports detected
[   69.769662] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[   69.769670] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21
[   69.769677] PCI: Setting latency timer of device 0000:00:14.0 to 64
[   69.769686] forcedeth: using HIGHDMA
[   70.291905] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:14.0
[   70.292825] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[   70.292833] ACPI: PCI Interrupt 0000:01:0e.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[   70.307489] usb 1-1: new low speed USB device using ohci_hcd and address 2
[   70.307528] sata_nv 0000:00:0e.0: version 3.3
[   70.307989] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[   70.307996] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
[   70.308025] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   70.308087] ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001d800 irq 20
[   70.308116] ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001d808 irq 20
[   70.308127] scsi0 : sata_nv
[   70.343254] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[f5004000-f50047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   70.514076] usb 1-1: configuration #1 chosen from 1 choice
[   70.525503] usbcore: registered new interface driver hiddev
[   70.532244] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[   70.532402] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-1
[   70.532415] usbcore: registered new interface driver usbhid
[   70.532418] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   70.774903] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   70.783021] ata1.00: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
[   70.783024] ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   70.791005] ata1.00: configured for UDMA/133
[   70.791014] scsi1 : sata_nv
[   71.102447] ata2: SATA link down (SStatus 0 SControl 300)
[   71.112927] ATA: abnormal status 0x7F on port 0x0000000000010977
[   71.113017] scsi 0:0:0:0: Direct-Access     ATA      ST3250620AS      3.AA PQ: 0 ANSI: 5
[   71.114136] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[   71.114139] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
[   71.114169] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[   71.114210] ata3: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001c400 irq 23
[   71.114238] ata4: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001c408 irq 23
[   71.114248] scsi2 : sata_nv
[   71.426025] ata3: SATA link down (SStatus 0 SControl 300)
[   71.436504] ATA: abnormal status 0x7F on port 0x00000000000109e7
[   71.436513] scsi3 : sata_nv
[   71.613945] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000fea00005d82d3]
[   71.749603] ata4: SATA link down (SStatus 0 SControl 300)
[   71.760085] ATA: abnormal status 0x7F on port 0x0000000000010967
[   71.763404] pata_amd 0000:00:0d.0: version 0.2.8
[   71.763439] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   71.763480] ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14
[   71.763509] ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15
[   71.763528] scsi4 : pata_amd
[   71.932419] ATA: abnormal status 0x7F on port 0x00000000000101f7
[   71.932436] scsi5 : pata_amd
[   72.100192] ATA: abnormal status 0x7F on port 0x0000000000010177
[   72.107313] SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB)
[   72.107327] sda: Write Protect is off
[   72.107329] sda: Mode Sense: 00 3a 00 00
[   72.107344] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   72.107397] SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB)
[   72.107405] sda: Write Protect is off
[   72.107407] sda: Mode Sense: 00 3a 00 00
[   72.107421] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   72.107426]  sda: sda1 sda2 sda3 sda4
[   72.119473] sd 0:0:0:0: Attached scsi disk sda
[   72.122985] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   82.904014] device-mapper: table: 254:4: snapshot-origin: unknown target type
[   82.904060] device-mapper: ioctl: error adding target to table
[   83.040912] Attempting manual resume
[   83.040916] swsusp: Resume From Partition 8:2
[   83.040917] PM: Checking swsusp image.
[   83.070980] PM: Resume from disk failed.
[   83.130135] kjournald starting.  Commit interval 5 seconds
[   83.130167] EXT3-fs: mounted filesystem with ordered data mode.
[   94.936078] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   94.939171] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   95.027035] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[   95.027070] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c80
[   95.099197] nvidia: module license 'NVIDIA' taints kernel.
[   95.355108] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[   95.355117] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16
[   95.355125] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   95.355295] NVRM: loading NVIDIA Linux x86_64 Kernel Module  1.0-9631  Thu Nov  9 17:35:27 PST 2006
[   95.381594] input: PC Speaker as /class/input/input3
[   95.425931] NET: Registered protocol family 17
[   95.818026] parport: PnPBIOS parport detected.
[   95.818087] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   96.370887] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   96.370892] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
[   96.370912] PCI: Setting latency timer of device 0000:00:10.1 to 64
[   96.577141] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   96.703360] device-mapper: table: 254:4: snapshot-origin: unknown target type
[   96.703413] device-mapper: ioctl: error adding target to table
[   96.857721] lp0: using parport0 (interrupt-driven).
[   97.023035] EXT3 FS on dm-5, internal journal
[   97.819523] device-mapper: table: 254:4: snapshot-origin: unknown target type
[   97.819576] device-mapper: ioctl: error adding target to table
[   98.171489] kjournald starting.  Commit interval 5 seconds
[   98.171600] EXT3 FS on sda1, internal journal
[   98.171604] EXT3-fs: mounted filesystem with ordered data mode.
[   98.196691] kjournald starting.  Commit interval 5 seconds
[   98.197084] EXT3 FS on dm-2, internal journal
[   98.197088] EXT3-fs: mounted filesystem with ordered data mode.
[   98.230045] kjournald starting.  Commit interval 5 seconds
[   98.230238] EXT3 FS on dm-6, internal journal
[   98.230242] EXT3-fs: mounted filesystem with ordered data mode.
[   98.276025] Adding 1951888k swap on /dev/mapper/swap.  Priority:-1 extents:1 across:1951888k
[   98.425848] tun: Universal TUN/TAP device driver, 1.6
[   98.425851] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   98.445695] device kvm-devel entered promiscuous mode
[   98.445705] audit(1176576007.372:2): dev=kvm-devel prom=256 old_prom=0 auid=4294967295
[   98.497947] device kvm-oracle entered promiscuous mode
[   98.497958] audit(1176576007.424:3): dev=kvm-oracle prom=256 old_prom=0 auid=4294967295
[   98.531382] device kvm-okuma entered promiscuous mode
[   98.531392] audit(1176576007.456:4): dev=kvm-okuma prom=256 old_prom=0 auid=4294967295
[   98.666020] NET: Registered protocol family 10
[   98.666122] lo: Disabled Privacy Extensions
[   98.770017] Bridge firewalling registered
[   98.779290] br0: port 3(kvm-okuma) entering learning state
[   98.779295] br0: port 2(kvm-oracle) entering learning state
[   98.779300] br0: port 1(kvm-devel) entering learning state
[  107.766230] br0: topology change detected, propagating
[  107.766235] br0: port 3(kvm-okuma) entering forwarding state
[  107.766237] br0: topology change detected, propagating
[  107.766240] br0: port 2(kvm-oracle) entering forwarding state
[  107.766242] br0: topology change detected, propagating
[  107.766244] br0: port 1(kvm-devel) entering forwarding state
[  108.689022] kvm-oracle: no IPv6 routers present
[  108.948681] kvm-okuma: no IPv6 routers present
[  109.248286] eth0: no IPv6 routers present
[  109.507946] kvm-devel: no IPv6 routers present
[  109.563871] br0: no IPv6 routers present
[  111.363329] Using specific hotkey driver
[  111.413050] No dock devices found.
[  111.439023] ibm_acpi: ec object not found
[  111.516319] input: Power Button (FF) as /class/input/input4
[  111.516615] ACPI: Power Button (FF) [PWRF]
[  111.517767] input: Power Button (CM) as /class/input/input5
[  111.518033] ACPI: Power Button (CM) [PWRB]
[  111.625233] pcc_acpi: loading...
[  111.822263] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00)
[  111.822519] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0xa
[  111.822523] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xc
[  111.822526] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
[  123.186880] ppdev: user-space parallel port driver
[  124.606402] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 0:05.0] forgot to specify physical device; fix it!
[  124.606450] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 0:05.0] forgot to specify physical device; fix it!
[  124.606476] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 0:05.0] forgot to specify physical device; fix it!
[  125.080439] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  125.186017] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[  125.186544] NFSD: starting 90-second grace period
[  126.806510] Bluetooth: Core ver 2.11
[  126.806566] NET: Registered protocol family 31
[  126.806568] Bluetooth: HCI device and connection manager initialized
[  126.806571] Bluetooth: HCI socket layer initialized
[  126.836162] Bluetooth: L2CAP ver 2.8
[  126.836167] Bluetooth: L2CAP socket layer initialized
[  126.839351] Bluetooth: RFCOMM socket layer initialized
[  126.839382] Bluetooth: RFCOMM TTY layer initialized
[  126.839385] Bluetooth: RFCOMM ver 1.8
[  133.482252] eth0: no IPv6 routers present
