ACK: [PATCH 0/3][SRU][J] Add ODM driver f81604 usb-can

[Roxana Nicolescu]

On 28/12/2023 04:29, AceLan Kao wrote:
> From: "Chia-Lin Kao (AceLan)" <acelan.kao at canonical.com>
>
> BugLink: https://bugs.launchpad.net/bugs/2045387
>
> [ Impact ]
> f81604 driver needed for ODM partner
>
> [ Test Plan ]
> Install can-utils
>
> apt install can-utils
>
> insert the driver:
> modprobe f81604
>
> two socket can interfaces will be created, can0 and can1
>
> connect the DB9 cable and termination provided.
> Set up the two interfaces:
> ip link set can1 up type can bitrate 500000
> ip link set can1 up type can bitrate 500000
> candump can0
>
> In another shell run:
> cansend can1 123#DEADBEEF
>
> The first shell should report the received frame. Switch the interfaces in
> the last commands to test the frame flow in the other way around.
>
> [ Where problems could occur ]
> USB bus miss-behavior could cause issues to the driver.
>
> Chia-Lin Kao (AceLan) (1):
>    UBUNTU: [Config] updateconfigs for ODM drivers CONFIG_CAN_F81604
>
> Filippo Copetti (1):
>    UBUNTU: SAUCE: ODM: can: usb: f81604: backport of Fintek F81604
>
> Ji-Ze Hong (1):
>    can: usb: f81604: add Fintek F81604 support
>
>   MAINTAINERS                      |    6 +
>   debian.master/config/annotations |    1 +
>   drivers/net/can/usb/Kconfig      |   12 +
>   drivers/net/can/usb/Makefile     |    1 +
>   drivers/net/can/usb/f81604.c     | 1204 ++++++++++++++++++++++++++++++
>   5 files changed, 1224 insertions(+)
>   create mode 100644 drivers/net/can/usb/f81604.c
>
Acked-by: Roxana Nicolescu <roxana.nicolescu at canonical.com>