BugLink: https://bugs.launchpad.net/bugs/2015400
Problem:
The max_loop parameter is used for 2 different purposes:
1) initial number of loop devices to pre-create on init
2) maximum number of loop devices to add on access/open()
Historically, its default value (zero) caused 1) to create non-zero
number of devices (CONFIG_BLK_DEV_LOOP_MIN_COUNT), and no hard limit on
2) to add devices with autoloading.
However, the default value changed in commit 85c50197716c ("loop: Fix
the max_loop commandline argument treatment when it is set to 0") to
CONFIG_BLK_DEV_LOOP_MIN_COUNT, for max_loop=0 not to pre-create devices.
That does improve 1), but unfortunately it breaks 2), as the default
behavior changed from no-limit to hard-limit.
Example:
For example, this userspace code broke for N >= CONFIG, if the user
relied on the default value 0 for max_loop:
mknod("/dev/loopN");
open("/dev/loopN"); // now fails with ENXIO
Though affected users may "fix" it with (loop.)max_loop=0, this means to
require a kernel parameter change on stable kernel update (that commit
Fixes: an old commit in stable).
Solution:
The original semantics for the default value in 2) can be applied if the
parameter is not set (ie, default behavior).
This still keeps the intended function in 1) and 2) if set, and that
commit's intended improvement in 1) if max_loop=0.
Before 85c50197716c:
- default: 1) CONFIG devices 2) no limit
- max_loop=0: 1) CONFIG devices 2) no limit
- max_loop=X: 1) X devices 2) X limit
After 85c50197716c:
- default: 1) CONFIG devices 2) CONFIG limit (*)
- max_loop=0: 1) 0 devices (*) 2) no limit
- max_loop=X: 1) X devices 2) X limit
This commit:
- default: 1) CONFIG devices 2) no limit (*)
- max_loop=0: 1) 0 devices 2) no limit
- max_loop=X: 1) X devices 2) X limit
Future:
The issue/regression from that commit only affects code under the
CONFIG_BLOCK_LEGACY_AUTOLOAD deprecation guard, thus the fix too is
contained under it.
Once that deprecated functionality/code is removed, the purpose 2) of
max_loop (hard limit) is no longer in use, so the module parameter
description can be changed then.
Tests:
Linux 6.4-rc7
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
- default (original)
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
open: /dev/loop8: No such device or address
- default (patched)
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
#
- max_loop=0 (original & patched):
# ls -1 /dev/loop*
/dev/loop-control
# ./test-loop
#
- max_loop=8 (original & patched):
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
open: /dev/loop8: No such device or address
- max_loop=0 (patched; CONFIG_BLOCK_LEGACY_AUTOLOAD is not set)
# ls -1 /dev/loop*
/dev/loop-control
# ./test-loop
open: /dev/loop8: No such device or address
Fixes: 85c50197716c ("loop: Fix the max_loop commandline argument treatment when it is set to 0")
Signed-off-by: Mauricio Faria de Oliveira <mfo at canonical.com>
Reviewed-by: Christoph Hellwig <hch at lst.de>
Link: https://lore.kernel.org/r/20230720143033.841001-3-mfo@canonical.com
Signed-off-by: Jens Axboe <axboe at kernel.dk>
(cherry picked from commit bb5faa99f0ce40756ab7bbbce4f16c01ca5ebd5a)
Signed-off-by: Mauricio Faria de Oliveira <mfo at canonical.com>
---
drivers/block/loop.c | 36 ++++++++++++++++++++++++++++++++++--
1 file changed, 34 insertions(+), 2 deletions(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index c44a04217eb5..6c04ecb7b0b4 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1777,14 +1777,43 @@ static const struct block_device_operations lo_fops = {
/*
* If max_loop is specified, create that many devices upfront.
* This also becomes a hard limit. If max_loop is not specified,
+ * the default isn't a hard limit (as before commit 85c50197716c
+ * changed the default value from 0 for max_loop=0 reasons), just
* create CONFIG_BLK_DEV_LOOP_MIN_COUNT loop devices at module
* init time. Loop devices can be requested on-demand with the
* /dev/loop-control interface, or be instantiated by accessing
* a 'dead' device node.
*/
static int max_loop = CONFIG_BLK_DEV_LOOP_MIN_COUNT;
-module_param(max_loop, int, 0444);
+
+#ifdef CONFIG_BLOCK_LEGACY_AUTOLOAD
+static bool max_loop_specified;
+
+static int max_loop_param_set_int(const char *val,
+ const struct kernel_param *kp)
+{
+ int ret;
+
+ ret = param_set_int(val, kp);
+ if (ret < 0)
+ return ret;
+
+ max_loop_specified = true;
+ return 0;
+}
+
+static const struct kernel_param_ops max_loop_param_ops = {
+ .set = max_loop_param_set_int,
+ .get = param_get_int,
+};
+
+module_param_cb(max_loop, &max_loop_param_ops, &max_loop, 0444);
MODULE_PARM_DESC(max_loop, "Maximum number of loop devices");
+#else
+module_param(max_loop, int, 0444);
+MODULE_PARM_DESC(max_loop, "Initial number of loop devices");
+#endif
+
module_param(max_part, int, 0444);
MODULE_PARM_DESC(max_part, "Maximum number of partitions per loop device");
@@ -2094,7 +2123,7 @@ static void loop_probe(dev_t dev)
{
int idx = MINOR(dev) >> part_shift;
- if (max_loop && idx >= max_loop)
+ if (max_loop_specified && max_loop && idx >= max_loop)
return;
loop_add(idx);
}
@@ -2281,6 +2310,9 @@ module_exit(loop_exit);
static int __init max_loop_setup(char *str)
{
max_loop = simple_strtol(str, NULL, 0);
+#ifdef CONFIG_BLOCK_LEGACY_AUTOLOAD
+ max_loop_specified = true;
+#endif
return 1;
}
--
2.39.2