[PATCH 1/1] ACPI: processor idle: Practically limit "Dummy wait" workaround to old Intel systems

[Jeff Lane]

From: Dave Hansen <dave.hansen at intel.com>

BugLink: https://bugs.launchpad.net/bugs/1990985

Old, circa 2002 chipsets have a bug: they don't go idle when they are
supposed to.  So, a workaround was added to slow the CPU down and
ensure that the CPU waits a bit for the chipset to actually go idle.
This workaround is ancient and has been in place in some form since
the original kernel ACPI implementation.

But, this workaround is very painful on modern systems.  The "inl()"
can take thousands of cycles (see Link: for some more detailed
numbers and some fun kernel archaeology).

First and foremost, modern systems should not be using this code.
Typical Intel systems have not used it in over a decade because it is
horribly inferior to MWAIT-based idle.

Despite this, people do seem to be tripping over this workaround on
AMD system today.

Limit the "dummy wait" workaround to Intel systems.  Keep Modern AMD
systems from tripping over the workaround.  Remotely modern Intel
systems use intel_idle instead of this code and will, in practice,
remain unaffected by the dummy wait.

Reported-by: K Prateek Nayak <kprateek.nayak at amd.com>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
Signed-off-by: Dave Hansen <dave.hansen at linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello at amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak at amd.com>
Link: https://lore.kernel.org/all/20220921063638.2489-1-kprateek.nayak@amd.com/
Link: https://lkml.kernel.org/r/20220922184745.3252932-1-dave.hansen@intel.com
(cherry picked from commit e400ad8b7e6a1b9102123c6240289a811501f7d9)
Signed-off-by: Jeff Lane <jeffrey.lane at canonical.com>
---
 drivers/acpi/processor_idle.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index aedcb92491f2..f0ae8b67d4d4 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -531,10 +531,27 @@ static void wait_for_freeze(void)
 	/* No delay is needed if we are in guest */
 	if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
 		return;
+	/*
+	 * Modern (>=Nehalem) Intel systems use ACPI via intel_idle,
+	 * not this code.  Assume that any Intel systems using this
+	 * are ancient and may need the dummy wait.  This also assumes
+	 * that the motivating chipset issue was Intel-only.
+	 */
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
+		return;
 #endif
-	/* Dummy wait op - must do something useless after P_LVL2 read
-	   because chipsets cannot guarantee that STPCLK# signal
-	   gets asserted in time to freeze execution properly. */
+	/*
+	 * Dummy wait op - must do something useless after P_LVL2 read
+	 * because chipsets cannot guarantee that STPCLK# signal gets
+	 * asserted in time to freeze execution properly
+	 *
+	 * This workaround has been in place since the original ACPI
+	 * implementation was merged, circa 2002.
+	 *
+	 * If a profile is pointing to this instruction, please first
+	 * consider moving your system to a more modern idle
+	 * mechanism.
+	 */
 	inl(acpi_gbl_FADT.xpm_timer_block.address);
 }
 
-- 
2.34.1