APPLIED: [SRU][K/raspi][PULL] kinetic/linux-raspi: Update to upstream raspberrypi rpi-5.19.y (2022-10-26) (LP: #1995968)

[Juerg Haefliger]

Applied to k/raspi master-next branch.

...Juerg


> BugLink: https://bugs.launchpad.net/bugs/1995968
> 
> Upstream raspberrypi patchset 2022-10-26
> 
>   Ported from the following raspberrypi branch:
>     rpi-5.19.y
>   from https://github.com/raspberrypi/linux.git
> 
> configs: Add FSIA6B driver module
> ARM: dts: Add nvmem node for BCM2711 bootloader public key
> configs: Add RTC_DRV_RV3032=m
> overlays: i2c-rtc: Add RV3032 support
> media: i2c: imx290: Correct min HBLANK.
> nvmem: Use NVMEM_DEVID_AUTO
> media: i2c: imx477: Do not unconditionally adjust hblank and vblank limits
> media: i2c: imx477: Reset hblank on mode switch
> vc04_services: bcm2835-codec: Allow encoder_cmd on ISP and deinterlace
> vc04_services: bcm2835-codec:  Remove redundant role check
> media: i2c: imx477: Allow dynamic horizontal blanking control
> overlays: Add rpi-sense-v2
> usb: xhci: account for num_trbs_free when invalidating TDs
> ARM: dts: Add dtparams to disable PCIe, HDMI, and SD card/eMMC
> Revert "Add PHY_ID_BCM54213PE identifier."
> media: i2c: imx219: make HBLANK r/w to allow longer exposures
> drm/vc4: hdmi: Reset link on hotplug
> drm/vc4: hdmi: Move vc4_hdmi_supports_scrambling() around
> drm/vc4: hdmi: Switch to detect_ctx
> drm/vc4: hdmi: Simplify the hotplug handling
> drm/vc4: hdmi: Remove mutex in detect
> drm/vc4: hdmi: Remove unused argument in vc4_hdmi_supports_scrambling
> drm/vc4: hdmi: Constify drm_display_mode
> 
> Boot-tested both arm64 and rmhf kernels on Pi 4, 3, 2, and zero2.
> 
> Signed-off-by: Juerg Haefliger <juerg.haefliger at canonical.com>
> 
> --------
> 
> The following changes since commit 75398ca4982db5511574c341fc1568218b23679e:
> 
>   UBUNTU: [Config] raspi: updateconfigs for gcc-12 for armhf (2022-11-08 15:40:32 +0100)
> 
> are available in the Git repository at:
> 
>   https://git.launchpad.net/~juergh/ubuntu/+source/linux lp1995968
> 
> for you to fetch changes up to 051c9700a0e3616ab583c05c06661e37bd5170bc:
> 
>   UBUNTU: raspi: Update to upstream raspberrypi rpi-5.19.y (2022-10-26) (2022-11-10 12:10:55 +0100)
> 
> ----------------------------------------------------------------
> Dave Stevenson (4):
>       media: i2c: imx219: make HBLANK r/w to allow longer exposures
>       vc04_services: bcm2835-codec:  Remove redundant role check
>       vc04_services: bcm2835-codec: Allow encoder_cmd on ISP and deinterlace
>       media: i2c: imx290: Correct min HBLANK.
> 
> Dom Cobley (1):
>       Revert "Add PHY_ID_BCM54213PE identifier."
> 
> Jonathan Bell (1):
>       usb: xhci: account for num_trbs_free when invalidating TDs
> 
> Juerg Haefliger (2):
>       UBUNTU: [Config] raspi: updateconfigs after update to rpi-5.19.y (2022-10-26)
>       UBUNTU: raspi: Update to upstream raspberrypi rpi-5.19.y (2022-10-26)
> 
> Maxime Ripard (7):
>       drm/vc4: hdmi: Constify drm_display_mode
>       drm/vc4: hdmi: Remove unused argument in vc4_hdmi_supports_scrambling
>       drm/vc4: hdmi: Remove mutex in detect
>       drm/vc4: hdmi: Simplify the hotplug handling
>       drm/vc4: hdmi: Switch to detect_ctx
>       drm/vc4: hdmi: Move vc4_hdmi_supports_scrambling() around
>       drm/vc4: hdmi: Reset link on hotplug
> 
> Naushir Patuck (3):
>       media: i2c: imx477: Allow dynamic horizontal blanking control
>       media: i2c: imx477: Reset hblank on mode switch
>       media: i2c: imx477: Do not unconditionally adjust hblank and vblank limits
> 
> Phil Elwell (5):
>       overlays: Add rpi-sense-v2
>       nvmem: Use NVMEM_DEVID_AUTO
>       overlays: i2c-rtc: Add RV3032 support
>       configs: Add RTC_DRV_RV3032=m
>       configs: Add FSIA6B driver module
> 
> Tim Gover (1):
>       ARM: dts: Add nvmem node for BCM2711 bootloader public key
> 
> Victor Ding (1):
>       ARM: dts: Add dtparams to disable PCIe, HDMI, and SD card/eMMC
> 
>  arch/arm/boot/dts/bcm2708-rpi.dtsi                 |   2 +
>  arch/arm/boot/dts/bcm2711-rpi-ds.dtsi              |   4 +
>  arch/arm/boot/dts/bcm2711-rpi.dtsi                 |  13 +
>  arch/arm/boot/dts/overlays/Makefile                |   1 +
>  arch/arm/boot/dts/overlays/README                  |  18 ++
>  arch/arm/boot/dts/overlays/i2c-rtc-common.dtsi     |  14 +
>  .../arm/boot/dts/overlays/rpi-sense-v2-overlay.dts |  47 ++++
>  arch/arm/configs/bcm2709_defconfig                 |   2 +
>  arch/arm/configs/bcm2711_defconfig                 |   2 +
>  arch/arm/configs/bcmrpi_defconfig                  |   2 +
>  arch/arm64/configs/bcm2711_defconfig               |   2 +
>  arch/arm64/configs/bcmrpi3_defconfig               |   2 +
>  debian.raspi/config/annotations                    |   2 +
>  debian.raspi/config/config.common.ubuntu           |   2 +-
>  debian.raspi/upstream-raspberrypi                  |   2 +-
>  drivers/gpu/drm/vc4/vc4_hdmi.c                     | 308 ++++++++++++++-------
>  drivers/gpu/drm/vc4/vc4_hdmi.h                     |  12 +-
>  drivers/media/i2c/imx219.c                         |  47 ++--
>  drivers/media/i2c/imx290.c                         |   7 +-
>  drivers/media/i2c/imx477.c                         |  27 +-
>  drivers/net/phy/bcm-phy-ptp.c                      |   3 -
>  drivers/nvmem/rmem.c                               |   1 +
>  .../bcm2835-codec/bcm2835-v4l2-codec.c             |   9 -
>  drivers/usb/host/xhci-ring.c                       |  14 +-
>  24 files changed, 365 insertions(+), 178 deletions(-)
>  create mode 100644 arch/arm/boot/dts/overlays/rpi-sense-v2-overlay.dts

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <https://lists.ubuntu.com/archives/kernel-team/attachments/20221111/6d8a53b4/attachment.sig>