[SRU][F:linux-bluefield][PATCH v1 1/1] mlxbf_gige: remove driver-managed interrupt counts

[David Thompson]

BugLink: https://bugs.launchpad.net/bugs/1975749

The driver currently has three interrupt counters,
which are incremented every time each interrupt handler
executes.  These driver-managed counters are not
necessary as the kernel already has logic that manages
interrupt counts and exposes them via /proc/interrupts.
This patch removes the driver-managed counters.

Signed-off-by: David Thompson <davthompson at nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa at nvidia.com>
Link: https://lore.kernel.org/r/20220511135251.2989-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba at kernel.org>
(cherry picked from commit f4826443f4d69d2c97c184952c085caf0936a7b8)
---
 drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h    | 3 ---
 .../ethernet/mellanox/mlxbf_gige/mlxbf_gige_ethtool.c    | 8 +++-----
 .../net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_intr.c   | 9 ---------
 3 files changed, 3 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h
index 86826a70f9dd..5fdf9b7179f5 100644
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h
+++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h
@@ -90,9 +90,6 @@ struct mlxbf_gige {
 	dma_addr_t rx_cqe_base_dma;
 	u16 tx_pi;
 	u16 prev_tx_ci;
-	u64 error_intr_count;
-	u64 rx_intr_count;
-	u64 llu_plu_intr_count;
 	struct sk_buff *rx_skb[MLXBF_GIGE_MAX_RXQ_SZ];
 	struct sk_buff *tx_skb[MLXBF_GIGE_MAX_TXQ_SZ];
 	int error_irq;
diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_ethtool.c b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_ethtool.c
index 24a32ffee4e4..257724323bfe 100644
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_ethtool.c
@@ -24,11 +24,9 @@ static void mlxbf_gige_get_regs(struct net_device *netdev,
 	regs->version = MLXBF_GIGE_REGS_VERSION;
 
 	/* Read entire MMIO register space and store results
-	 * into the provided buffer. Each 64-bit word is converted
-	 * to big-endian to make the output more readable.
-	 *
-	 * NOTE: by design, a read to an offset without an existing
-	 *       register will be acknowledged and return zero.
+	 * into the provided buffer. By design, a read to an
+	 * offset without an existing register will be
+	 * acknowledged and return zero.
 	 */
 	memcpy_fromio(p, priv->base, MLXBF_GIGE_MMIO_REG_SZ);
 }
diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_intr.c b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_intr.c
index c38795be04a2..5b3519f0cc46 100644
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_intr.c
+++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_intr.c
@@ -17,8 +17,6 @@ static irqreturn_t mlxbf_gige_error_intr(int irq, void *dev_id)
 
 	priv = dev_id;
 
-	priv->error_intr_count++;
-
 	int_status = readq(priv->base + MLXBF_GIGE_INT_STATUS);
 
 	if (int_status & MLXBF_GIGE_INT_STATUS_HW_ACCESS_ERROR)
@@ -75,8 +73,6 @@ static irqreturn_t mlxbf_gige_rx_intr(int irq, void *dev_id)
 
 	priv = dev_id;
 
-	priv->rx_intr_count++;
-
 	/* NOTE: GigE silicon automatically disables "packet rx" interrupt by
 	 *       setting MLXBF_GIGE_INT_MASK bit0 upon triggering the interrupt
 	 *       to the ARM cores.  Software needs to re-enable "packet rx"
@@ -90,11 +86,6 @@ static irqreturn_t mlxbf_gige_rx_intr(int irq, void *dev_id)
 
 static irqreturn_t mlxbf_gige_llu_plu_intr(int irq, void *dev_id)
 {
-	struct mlxbf_gige *priv;
-
-	priv = dev_id;
-	priv->llu_plu_intr_count++;
-
 	return IRQ_HANDLED;
 }
 
-- 
2.30.1