[J/OEM-5.14] [PATCH 07/11] drm/i915/display: Handle frontbuffer rendering when PSR2 selective fetch is enabled
kai.heng.feng at canonical.com
Fri Jun 10 03:56:46 UTC 2022
From: José Roberto de Souza <jose.souza at intel.com>
When PSR2 selective fetch is enabled writes to CURSURFLIVE alone do
not causes the panel to be updated when doing frontbuffer rendering.
>From what I was able to figure from experiments the writes to
CURSURFLIVE takes PSR2 from deep sleep but panel is not updated
because PSR2_MAN_TRK_CTL has no start and end region set.
As we don't have the dirt area from current flush and invalidate API
and even if we did userspace could do several draws to frontbuffer and
we would need a way to append all the damaged areas of all the draws
that need to be part of next frame.
So here only programing PSR2_MAN_TRK_CTL to do a single full frame
It is a safe approach as if scanout is in the visible area
the single full frame will only be visible for hardware in the next
frame because of the double buffering, and if scanout is in vblank
area it will be draw in the current frame.
No need to disable PSR and wait a few miliseconds to enable it again.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun at intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun at intel.com>
(cherry picked from commit 34ac6b651f39e63da8d0ae0edd2db32fbb1bc02c)
Signed-off-by: Kai-Heng Feng <kai.heng.feng at canonical.com>
drivers/gpu/drm/i915/display/intel_psr.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index 6c31e4f0d026c..c8b8a8fc6edb1 100644
@@ -1405,10 +1405,22 @@ void intel_psr_resume(struct intel_dp *intel_dp)
+static inline u32 man_trk_ctl_single_full_frame_bit_get(struct drm_i915_private *dev_priv)
+ return IS_ALDERLAKE_P(dev_priv) ?
+ ADLP_PSR2_MAN_TRK_CTL_SF_SINGLE_FULL_FRAME :
static void psr_force_hw_tracking_exit(struct intel_dp *intel_dp)
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ if (intel_dp->psr.psr2_sel_fetch_enabled)
+ PSR2_MAN_TRK_CTL(intel_dp->psr.transcoder), 0,
* Display WA #0884: skl+
* This documented WA for bxt can be safely applied
@@ -1417,6 +1429,10 @@ static void psr_force_hw_tracking_exit(struct intel_dp *intel_dp)
* Workaround tells us to write 0 to CUR_SURFLIVE_A,
* but it makes more sense write to the current active
+ * This workaround do not exist for platforms with display 10 or newer
+ * but testing proved that it works for up display 13, for newer
+ * than that testing will be needed.
intel_de_write(dev_priv, CURSURFLIVE(intel_dp->psr.pipe), 0);
More information about the kernel-team