[PATCH 13/30] drm/amd/display: Implement DPIA equalisation phase
Timo Aaltonen
tjaalton at ubuntu.com
Mon Nov 22 18:06:15 UTC 2021
From: Jimmy Kizito <Jimmy.Kizito at amd.com>
BugLink: https://bugs.launchpad.net/bugs/1951868
[Why]
Equalisation is the mandatory second phase of DisplayPort link training
over a USB4 DP tunnel.
[How]
Implement equalisation phase for DP tunneled over USB4 in DPIA
training module.
Reviewed-by: Jun Lei <Jun.Lei at amd.com>
Acked-by: Wayne Lin <Wayne.Lin at amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>
Acked-by: Harry Wentland <harry.wentland at amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
(cherry picked from commit 847a9038c2d025b32cd7ddcc2ccfa0e82a8ded53)
Signed-off-by: Timo Aaltonen <timo.aaltonen at canonical.com>
---
.../drm/amd/display/dc/core/dc_link_dpia.c | 249 +++++++++++++++++-
1 file changed, 246 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dpia.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dpia.c
index 2bb78a3513f7..9ecbe87e7358 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dpia.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dpia.c
@@ -478,17 +478,260 @@ static enum link_training_result dpia_training_cr_phase(struct dc_link *link,
return result;
}
+/* Return status read interval during equalization phase. */
+static uint32_t dpia_get_eq_aux_rd_interval(const struct dc_link *link,
+ const struct link_training_settings *lt_settings,
+ uint32_t hop)
+{
+ uint32_t wait_time_microsec;
+
+ if (hop == DPRX)
+ wait_time_microsec = lt_settings->eq_pattern_time;
+ else
+ wait_time_microsec =
+ dp_translate_training_aux_read_interval(
+ link->dpcd_caps.lttpr_caps.aux_rd_interval[hop - 1]);
+
+ return wait_time_microsec;
+}
+
+/* Execute equalization phase of link training for specified hop in display
+ * path in non-transparent mode:
+ * - driver issues both DPCD and SET_CONFIG transactions.
+ * - TPSx is transmitted for any hops downstream of DPOA.
+ * - Drive (VS/PE) only transmitted for the hop immediately downstream of DPOA.
+ * - EQ for the first hop (DPTX-to-DPIA) is assumed to be successful.
+ * - DPRX EQ only reported successful when both DPRX and DPIA requirements
+ * (clk sync packets sent) fulfilled.
+ *
+ * @param link DPIA link being trained.
+ * @param lt_settings link_setting and drive settings (voltage swing and pre-emphasis).
+ * @param hop The Hop in display path. DPRX = 0.
+ */
+static enum link_training_result dpia_training_eq_non_transparent(struct dc_link *link,
+ struct link_training_settings *lt_settings,
+ uint32_t hop)
+{
+ enum link_training_result result = LINK_TRAINING_EQ_FAIL_EQ;
+ uint8_t repeater_cnt = 0; /* Number of hops/repeaters in display path. */
+ uint32_t retries_eq = 0;
+ enum dc_status status;
+ enum dc_dp_training_pattern tr_pattern;
+ uint32_t wait_time_microsec;
+ struct link_training_settings req_settings;
+ enum dc_lane_count lane_count = lt_settings->link_settings.lane_count;
+ union lane_align_status_updated dpcd_lane_status_updated = { {0} };
+ union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = { { {0} } };
+ uint8_t set_cfg_data;
+ enum dpia_set_config_ts ts;
+
+ /* Training pattern is TPS4 for repeater;
+ * TPS2/3/4 for DPRX depending on what it supports.
+ */
+ if (hop == DPRX)
+ tr_pattern = lt_settings->pattern_for_eq;
+ else
+ tr_pattern = DP_TRAINING_PATTERN_SEQUENCE_4;
+
+ repeater_cnt = dp_convert_to_count(link->dpcd_caps.lttpr_caps.phy_repeater_cnt);
+
+ for (retries_eq = 0; retries_eq < LINK_TRAINING_MAX_RETRY_COUNT; retries_eq++) {
+ /* DPTX-to-DPIA equalization always successful. */
+ if (hop == repeater_cnt) {
+ result = LINK_TRAINING_SUCCESS;
+ break;
+ }
+
+ /* Instruct DPOA to transmit TPSn then update DPCD. */
+ if (retries_eq == 0) {
+ ts = convert_trng_ptn_to_trng_stg(tr_pattern);
+ status = core_link_send_set_config(link,
+ DPIA_SET_CFG_SET_TRAINING,
+ ts);
+ if (status != DC_OK) {
+ result = LINK_TRAINING_ABORT;
+ break;
+ }
+ status = dpcd_set_lt_pattern(link, tr_pattern, hop);
+ if (status != DC_OK) {
+ result = LINK_TRAINING_ABORT;
+ break;
+ }
+ }
+
+ /* Update DPOA drive settings then DPCD. DPOA only adjusts
+ * drive settings for hop immediately downstream.
+ */
+ if (hop == repeater_cnt - 1) {
+ set_cfg_data = dpia_build_set_config_data(DPIA_SET_CFG_SET_VSPE,
+ link,
+ lt_settings);
+ status = core_link_send_set_config(link,
+ DPIA_SET_CFG_SET_VSPE,
+ set_cfg_data);
+ if (status != DC_OK) {
+ result = LINK_TRAINING_ABORT;
+ break;
+ }
+ }
+ status = dpcd_set_lane_settings(link, lt_settings, hop);
+ if (status != DC_OK) {
+ result = LINK_TRAINING_ABORT;
+ break;
+ }
+
+ /* Extend wait time on second equalisation attempt on final hop to
+ * ensure clock sync packets have been sent.
+ */
+ if (hop == DPRX && retries_eq == 1)
+ wait_time_microsec = max(wait_time_microsec, (uint32_t)DPIA_CLK_SYNC_DELAY);
+ else
+ wait_time_microsec = dpia_get_eq_aux_rd_interval(link, lt_settings, hop);
+
+ dp_wait_for_training_aux_rd_interval(link, wait_time_microsec);
+
+ /* Read status and adjustment requests from DPCD. */
+ status = dp_get_lane_status_and_drive_settings(link,
+ lt_settings,
+ dpcd_lane_status,
+ &dpcd_lane_status_updated,
+ &req_settings,
+ hop);
+ if (status != DC_OK) {
+ result = LINK_TRAINING_ABORT;
+ break;
+ }
+
+ /* CR can still fail during EQ phase. Fail training if CR fails. */
+ if (!dp_is_cr_done(lane_count, dpcd_lane_status)) {
+ result = LINK_TRAINING_EQ_FAIL_CR;
+ break;
+ }
+
+ if (dp_is_ch_eq_done(lane_count, dpcd_lane_status) &&
+ dp_is_symbol_locked(link->cur_link_settings.lane_count, dpcd_lane_status) &&
+ dp_is_interlane_aligned(dpcd_lane_status_updated)) {
+ result = LINK_TRAINING_SUCCESS;
+ break;
+ }
+
+ /* Update VS/PE. */
+ dp_update_drive_settings(lt_settings, req_settings);
+ }
+
+ /* Abort link training if equalization failed due to HPD unplug. */
+ if (!link->hpd_status)
+ result = LINK_TRAINING_ABORT;
+
+ DC_LOG_HW_LINK_TRAINING("%s\n DPIA(%d) equalization\n"
+ " - hop(%d)\n - result(%d)\n - retries(%d)\n",
+ __func__,
+ link->link_id.enum_id - ENUM_ID_1,
+ hop,
+ result,
+ retries_eq);
+
+ return result;
+}
+
+/* Execute equalization phase of link training for specified hop in display
+ * path in transparent LTTPR mode:
+ * - driver only issues DPCD transactions leaves USB4 tunneling (SET_CONFIG) messages to DPIA.
+ * - driver writes TPSx to DPCD to notify DPIA that is in equalization phase.
+ * - equalization (EQ) for link is handled by DPOA, which reports result to DPIA on completion.
+ * - DPIA communicates result to driver by updating EQ status when driver reads DPCD.
+ *
+ * @param link DPIA link being trained.
+ * @param lt_settings link_setting and drive settings (voltage swing and pre-emphasis).
+ * @param hop The Hop in display path. DPRX = 0.
+ */
+static enum link_training_result dpia_training_eq_transparent(struct dc_link *link,
+ struct link_training_settings *lt_settings)
+{
+ enum link_training_result result = LINK_TRAINING_EQ_FAIL_EQ;
+ uint32_t retries_eq = 0;
+ enum dc_status status;
+ enum dc_dp_training_pattern tr_pattern = lt_settings->pattern_for_eq;
+ uint32_t wait_time_microsec;
+ struct link_training_settings req_settings;
+ enum dc_lane_count lane_count = lt_settings->link_settings.lane_count;
+ union lane_align_status_updated dpcd_lane_status_updated = { {0} };
+ union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = { { {0} } };
+
+ wait_time_microsec = dpia_get_eq_aux_rd_interval(link, lt_settings, DPRX);
+
+ for (retries_eq = 0; retries_eq < LINK_TRAINING_MAX_RETRY_COUNT; retries_eq++) {
+ if (retries_eq == 0) {
+ status = dpcd_set_lt_pattern(link, tr_pattern, DPRX);
+ if (status != DC_OK) {
+ result = LINK_TRAINING_ABORT;
+ break;
+ }
+ }
+
+ dp_wait_for_training_aux_rd_interval(link, wait_time_microsec);
+
+ /* Read status and adjustment requests from DPCD. */
+ status = dp_get_lane_status_and_drive_settings(link,
+ lt_settings,
+ dpcd_lane_status,
+ &dpcd_lane_status_updated,
+ &req_settings,
+ DPRX);
+ if (status != DC_OK) {
+ result = LINK_TRAINING_ABORT;
+ break;
+ }
+
+ /* CR can still fail during EQ phase. Fail training if CR fails. */
+ if (!dp_is_cr_done(lane_count, dpcd_lane_status)) {
+ result = LINK_TRAINING_EQ_FAIL_CR;
+ break;
+ }
+
+ if (dp_is_ch_eq_done(lane_count, dpcd_lane_status) &&
+ dp_is_symbol_locked(link->cur_link_settings.lane_count, dpcd_lane_status) &&
+ dp_is_interlane_aligned(dpcd_lane_status_updated)) {
+ result = LINK_TRAINING_SUCCESS;
+ break;
+ }
+
+ /* Update VS/PE. */
+ dp_update_drive_settings(lt_settings, req_settings);
+ }
+
+ /* Abort link training if equalization failed due to HPD unplug. */
+ if (!link->hpd_status)
+ result = LINK_TRAINING_ABORT;
+
+ DC_LOG_HW_LINK_TRAINING("%s\n DPIA(%d) equalization\n"
+ " - hop(%d)\n - result(%d)\n - retries(%d)\n",
+ __func__,
+ link->link_id.enum_id - ENUM_ID_1,
+ DPRX,
+ result,
+ retries_eq);
+
+ return result;
+}
+
/* Execute equalization phase of link training for specified hop in display
* path.
+ *
+ * @param link DPIA link being trained.
+ * @param lt_settings link_setting and drive settings (voltage swing and pre-emphasis).
+ * @param hop The Hop in display path. DPRX = 0.
*/
static enum link_training_result dpia_training_eq_phase(struct dc_link *link,
struct link_training_settings *lt_settings,
uint32_t hop)
{
- enum link_training_result result;
+ enum link_training_result result = LINK_TRAINING_EQ_FAIL_EQ;
- /** @todo Fail until implemented. */
- result = LINK_TRAINING_ABORT;
+ if (link->lttpr_mode == LTTPR_MODE_NON_TRANSPARENT)
+ result = dpia_training_eq_non_transparent(link, lt_settings, hop);
+ else
+ result = dpia_training_eq_transparent(link, lt_settings);
return result;
}
--
2.32.0
More information about the kernel-team
mailing list