[F-OEM-5.6][SRU][PATCH 1/2] selftests: pmtu.sh: use $ksft_skip for skipped return code
Po-Hsu Lin
po-hsu.lin at canonical.com
Mon May 24 06:58:43 UTC 2021
BugLink: https://bugs.launchpad.net/bugs/1887661
This test uses return code 2 as a hard-coded skipped state, let's use
the kselftest framework skip code variable $ksft_skip instead to make
it more readable and easier to maintain.
Signed-off-by: Po-Hsu Lin <po-hsu.lin at canonical.com>
Signed-off-by: Jakub Kicinski <kuba at kernel.org>
(backported from commit ef1220a7d4bbdb5fc435d691776778568dfb69a8)
[PHLin: ignore changes for the test cases that do not exist yet]
Signed-off-by: Po-Hsu Lin <po-hsu.lin at canonical.com>
---
tools/testing/selftests/net/pmtu.sh | 48 ++++++++++++++++++-------------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh
index 71a62e7..1b73d82 100755
--- a/tools/testing/selftests/net/pmtu.sh
+++ b/tools/testing/selftests/net/pmtu.sh
@@ -288,7 +288,7 @@ setup_fou_or_gue() {
encap="${3}"
if [ "${outer}" = "4" ]; then
- modprobe fou || return 2
+ modprobe fou || return $ksft_skip
a_addr="${prefix4}.${a_r1}.1"
b_addr="${prefix4}.${b_r1}.1"
if [ "${inner}" = "4" ]; then
@@ -299,7 +299,7 @@ setup_fou_or_gue() {
ipproto="41"
fi
else
- modprobe fou6 || return 2
+ modprobe fou6 || return $ksft_skip
a_addr="${prefix6}:${a_r1}::1"
b_addr="${prefix6}:${b_r1}::1"
if [ "${inner}" = "4" ]; then
@@ -313,8 +313,8 @@ setup_fou_or_gue() {
fi
fi
- run_cmd ${ns_a} ip fou add port 5555 ipproto ${ipproto} || return 2
- run_cmd ${ns_a} ip link add ${encap}_a type ${type} ${mode} local ${a_addr} remote ${b_addr} encap ${encap} encap-sport auto encap-dport 5556 || return 2
+ run_cmd ${ns_a} ip fou add port 5555 ipproto ${ipproto} || return $ksft_skip
+ run_cmd ${ns_a} ip link add ${encap}_a type ${type} ${mode} local ${a_addr} remote ${b_addr} encap ${encap} encap-sport auto encap-dport 5556 || return $ksft_skip
run_cmd ${ns_b} ip fou add port 5556 ipproto ${ipproto}
run_cmd ${ns_b} ip link add ${encap}_b type ${type} ${mode} local ${b_addr} remote ${a_addr} encap ${encap} encap-sport auto encap-dport 5555
@@ -662,7 +662,7 @@ check_pmtu_value() {
test_pmtu_ipvX() {
family=${1}
- setup namespaces routing || return 2
+ setup namespaces routing || return $ksft_skip
trace "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \
"${ns_r1}" veth_R1-B "${ns_b}" veth_B-R1 \
"${ns_a}" veth_A-R2 "${ns_r2}" veth_R2-A \
@@ -760,11 +760,11 @@ test_pmtu_ipvX_over_vxlanY_or_geneveY_exception() {
ll_mtu=4000
if [ ${outer_family} -eq 4 ]; then
- setup namespaces routing ${type}4 || return 2
+ setup namespaces routing ${type}4 || return $ksft_skip
# IPv4 header UDP header VXLAN/GENEVE header Ethernet header
exp_mtu=$((${ll_mtu} - 20 - 8 - 8 - 14))
else
- setup namespaces routing ${type}6 || return 2
+ setup namespaces routing ${type}6 || return $ksft_skip
# IPv6 header UDP header VXLAN/GENEVE header Ethernet header
exp_mtu=$((${ll_mtu} - 40 - 8 - 8 - 14))
fi
@@ -834,7 +834,7 @@ test_pmtu_ipvX_over_fouY_or_gueY() {
encap=${3}
ll_mtu=4000
- setup namespaces routing ${encap}${outer_family}${inner_family} || return 2
+ setup namespaces routing ${encap}${outer_family}${inner_family} || return $ksft_skip
trace "${ns_a}" ${encap}_a "${ns_b}" ${encap}_b \
"${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \
"${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B
@@ -909,7 +909,7 @@ test_pmtu_ipv6_gue6_exception() {
}
test_pmtu_vti4_exception() {
- setup namespaces veth vti4 xfrm4 || return 2
+ setup namespaces veth vti4 xfrm4 || return $ksft_skip
trace "${ns_a}" veth_a "${ns_b}" veth_b \
"${ns_a}" vti4_a "${ns_b}" vti4_b
@@ -939,7 +939,7 @@ test_pmtu_vti4_exception() {
}
test_pmtu_vti6_exception() {
- setup namespaces veth vti6 xfrm6 || return 2
+ setup namespaces veth vti6 xfrm6 || return $ksft_skip
trace "${ns_a}" veth_a "${ns_b}" veth_b \
"${ns_a}" vti6_a "${ns_b}" vti6_b
fail=0
@@ -969,7 +969,7 @@ test_pmtu_vti6_exception() {
}
test_pmtu_vti4_default_mtu() {
- setup namespaces veth vti4 || return 2
+ setup namespaces veth vti4 || return $ksft_skip
# Check that MTU of vti device is MTU of veth minus IPv4 header length
veth_mtu="$(link_get_mtu "${ns_a}" veth_a)"
@@ -981,7 +981,7 @@ test_pmtu_vti4_default_mtu() {
}
test_pmtu_vti6_default_mtu() {
- setup namespaces veth vti6 || return 2
+ setup namespaces veth vti6 || return $ksft_skip
# Check that MTU of vti device is MTU of veth minus IPv6 header length
veth_mtu="$(link_get_mtu "${ns_a}" veth_a)"
@@ -993,10 +993,10 @@ test_pmtu_vti6_default_mtu() {
}
test_pmtu_vti4_link_add_mtu() {
- setup namespaces || return 2
+ setup namespaces || return $ksft_skip
run_cmd ${ns_a} ip link add vti4_a type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10
- [ $? -ne 0 ] && err " vti not supported" && return 2
+ [ $? -ne 0 ] && err " vti not supported" && return $ksft_skip
run_cmd ${ns_a} ip link del vti4_a
fail=0
@@ -1031,10 +1031,10 @@ test_pmtu_vti4_link_add_mtu() {
}
test_pmtu_vti6_link_add_mtu() {
- setup namespaces || return 2
+ setup namespaces || return $ksft_skip
run_cmd ${ns_a} ip link add vti6_a type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10
- [ $? -ne 0 ] && err " vti6 not supported" && return 2
+ [ $? -ne 0 ] && err " vti6 not supported" && return $ksft_skip
run_cmd ${ns_a} ip link del vti6_a
fail=0
@@ -1069,10 +1069,10 @@ test_pmtu_vti6_link_add_mtu() {
}
test_pmtu_vti6_link_change_mtu() {
- setup namespaces || return 2
+ setup namespaces || return $ksft_skip
run_cmd ${ns_a} ip link add dummy0 mtu 1500 type dummy
- [ $? -ne 0 ] && err " dummy not supported" && return 2
+ [ $? -ne 0 ] && err " dummy not supported" && return $ksft_skip
run_cmd ${ns_a} ip link add dummy1 mtu 3000 type dummy
run_cmd ${ns_a} ip link set dummy0 up
run_cmd ${ns_a} ip link set dummy1 up
@@ -1125,10 +1125,10 @@ test_cleanup_vxlanX_exception() {
encap="vxlan"
ll_mtu=4000
- check_command taskset || return 2
+ check_command taskset || return $ksft_skip
cpu_list=$(grep -m 2 processor /proc/cpuinfo | cut -d ' ' -f 2)
- setup namespaces routing ${encap}${outer} || return 2
+ setup namespaces routing ${encap}${outer} || return $ksft_skip
trace "${ns_a}" ${encap}_a "${ns_b}" ${encap}_b \
"${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \
"${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B
@@ -1190,7 +1190,7 @@ run_test() {
fi
err_flush
exit 1
- elif [ $ret -eq 2 ]; then
+ elif [ $ret -eq $ksft_skip ]; then
printf "TEST: %-60s [SKIP]\n" "${tdesc}"
err_flush
fi
@@ -1213,7 +1213,7 @@ run_test_nh() {
}
test_list_flush_ipv4_exception() {
- setup namespaces routing || return 2
+ setup namespaces routing || return $ksft_skip
trace "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \
"${ns_r1}" veth_R1-B "${ns_b}" veth_B-R1 \
"${ns_a}" veth_A-R2 "${ns_r2}" veth_R2-A \
@@ -1267,7 +1267,7 @@ test_list_flush_ipv4_exception() {
}
test_list_flush_ipv6_exception() {
- setup namespaces routing || return 2
+ setup namespaces routing || return $ksft_skip
trace "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \
"${ns_r1}" veth_R1-B "${ns_b}" veth_B-R1 \
"${ns_a}" veth_A-R2 "${ns_r2}" veth_R2-A \
@@ -1386,7 +1386,7 @@ for t in ${tests}; do
if [ $run_this -eq 1 ]; then
run_test "${name}" "${desc}"
# if test was skipped no need to retry with nexthop objects
- [ $? -eq 2 ] && rerun_nh=0
+ [ $? -eq $ksft_skip ] && rerun_nh=0
if [ "${rerun_nh}" = "1" ]; then
run_test_nh "${name}" "${desc}"
--
2.7.4
More information about the kernel-team
mailing list