[SRU][F/oracle][PULL] focal/linux-oracle: arm64 support (LP: #1925421)
Krzysztof Kozlowski
krzysztof.kozlowski at canonical.com
Tue Apr 27 07:07:48 UTC 2021
On 26/04/2021 23:34, Khaled Elmously wrote:
> BugLink: https://bugs.launchpad.net/bugs/1925421
>
> The following changes since commit a966d7fa5140c52c91352f4b882c8a797befdb96:
>
> UBUNTU: [Config]: Disable ATARI_PARTITION (2021-04-15 18:37:29 +0200)
>
> are available in the Git repository at:
>
> git+ssh://git.launchpad.net/~kmously/ubuntu/+source/linux/+git/focal tags/oracle-arm-11
>
> for you to fetch changes up to 5605c99ec04395a31e63edf46171cdd8d1f2de74:
>
> Perf: arm-cmn: Allow irq to be shared. (2021-04-26 17:24:21 -0400)
>
> ----------------------------------------------------------------
> Baoquan He (1):
> mm: memmap_init: iterate over memblock regions rather that check each PFN
>
> James Morse (2):
> mm/memory-failure: Add memory_failure_queue_kick()
> ACPI: APEI: Kick the memory_failure() queue for synchronous errors
>
> Khalid Elmously (5):
> UBUNTU: Start new release
> UBUNTU: [config] Bring-up for arm64 support
> UBUNTU: [config] Update configs and annotations after arm64 bring-up
The arm64 config looks quite small. What looks unusual is that it misses
typical arm64 settings like ARCH, ENERGY_MODEL, CPUFREQ_DT and many
more. Are these defined somewhere else?
Later, also added SENSORS_ALTRA is not being enabled.
I also don't see the DTS, so it's difficult to review hardware support
(since there is no HW description).
Best regards,
Krzysztof
> UBUNTU: [config] adding amba pl011 config
> UBUNTU: [config] updateconfigs
>
> Mike Rapoport (20):
> mm: memblock: replace dereferences of memblock_region.nid with API calls
> mm: make early_pfn_to_nid() and related defintions close to each other
> mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option
> mm: free_area_init: use maximal zone PFNs rather than zone sizes
> mm: use free_area_init() instead of free_area_init_nodes()
> alpha: simplify detection of memory zone boundaries
> arm: simplify detection of memory zone boundaries
> arm64: simplify detection of memory zone boundaries for UMA configs
> csky: simplify detection of memory zone boundaries
> m68k: mm: simplify detection of memory zone boundaries
> parisc: simplify detection of memory zone boundaries
> sparc32: simplify detection of memory zone boundaries
> unicore32: simplify detection of memory zone boundaries
> xtensa: simplify detection of memory zone boundaries
> mm: remove early_pfn_in_nid() and CONFIG_NODES_SPAN_OTHER_NODES
> mm: free_area_init: allow defining max_zone_pfn in descending order
> mm: rename free_area_init_node() to free_area_init_memoryless_node()
> mm: clean up free_area_init_node() and its helpers
> mm: simplify find_min_pfn_with_active_regions()
> docs/vm: update memory-models documentation
>
> Robin Murphy (2):
> perf: Add Arm CMN-600 PMU driver
> perf: Add Arm CMN-600 DT binding
>
> Tuan Phan (7):
> UBUNTU: SAUCE: perf/smmuv3: Allow sharing MMIO registers with the SMMU driver
> arm64: Split the old READ_IMPLIES_EXEC workaround from executable
> PCI/ACPI: Add Ampere Altra SOC MCFG quirk
> driver/perf: Add PMU driver for the ARM DMC-620 memory controller
> perf: arm_dsu: Support DSU ACPI devices
> perf: arm_dsu: Allow IRQ to be shared among devices.
> Perf: arm-cmn: Allow irq to be shared.
>
> Vanshidhar Konda (1):
> arm64: NUMA: Kconfig: Increase NODES_SHIFT to 4
>
> lho (1):
> hwmon: Add Ampere Altra HW monitor driver
>
> Documentation/admin-guide/perf/arm-cmn.rst | 65 +
> Documentation/admin-guide/perf/index.rst | 1 +
> .../devicetree/bindings/perf/arm,cmn.yaml | 57 +
> .../features/vm/numa-memblock/arch-support.txt | 34 -
> Documentation/vm/memory-model.rst | 9 +-
> arch/alpha/mm/init.c | 16 +-
> arch/alpha/mm/numa.c | 22 +-
> arch/arc/mm/init.c | 41 +-
> arch/arm/kernel/elf.c | 27 +-
> arch/arm/mm/init.c | 66 +-
> arch/arm64/Kconfig | 3 +-
> arch/arm64/include/asm/elf.h | 23 +-
> arch/arm64/mm/init.c | 48 +-
> arch/arm64/mm/numa.c | 9 +-
> arch/c6x/mm/init.c | 8 +-
> arch/csky/kernel/setup.c | 26 +-
> arch/h8300/mm/init.c | 6 +-
> arch/hexagon/mm/init.c | 6 +-
> arch/ia64/Kconfig | 1 -
> arch/ia64/mm/contig.c | 2 +-
> arch/ia64/mm/discontig.c | 2 +-
> arch/m68k/mm/init.c | 6 +-
> arch/m68k/mm/mcfmmu.c | 9 +-
> arch/m68k/mm/motorola.c | 15 +-
> arch/m68k/mm/sun3mmu.c | 10 +-
> arch/microblaze/Kconfig | 1 -
> arch/microblaze/mm/init.c | 2 +-
> arch/mips/Kconfig | 1 -
> arch/mips/mm/init.c | 2 +-
> arch/mips/sgi-ip27/ip27-memory.c | 2 +-
> arch/nds32/mm/init.c | 11 +-
> arch/nios2/mm/init.c | 8 +-
> arch/openrisc/mm/init.c | 9 +-
> arch/parisc/mm/init.c | 22 +-
> arch/powerpc/Kconfig | 10 -
> arch/powerpc/mm/mem.c | 2 +-
> arch/riscv/Kconfig | 1 -
> arch/riscv/mm/init.c | 2 +-
> arch/s390/Kconfig | 1 -
> arch/s390/mm/init.c | 2 +-
> arch/sh/Kconfig | 1 -
> arch/sh/mm/init.c | 2 +-
> arch/sparc/Kconfig | 10 -
> arch/sparc/mm/init_64.c | 2 +-
> arch/sparc/mm/srmmu.c | 21 +-
> arch/um/kernel/mem.c | 12 +-
> arch/unicore32/include/asm/memory.h | 2 +-
> arch/unicore32/include/mach/memory.h | 6 +-
> arch/unicore32/kernel/pci.c | 14 +-
> arch/unicore32/mm/init.c | 43 +-
> arch/x86/Kconfig | 10 -
> arch/x86/include/asm/elf.h | 22 +-
> arch/x86/mm/init.c | 2 +-
> arch/x86/mm/numa.c | 11 +-
> arch/xtensa/mm/init.c | 8 +-
> debian.oracle/abi/5.4.0-1039.42/arm64/ignore | 0
> .../abi/5.4.0-1039.42/arm64/ignore.modules | 0
> .../abi/5.4.0-1039.42/arm64/ignore.retpoline | 0
> debian.oracle/abi/5.4.0-1042.45/abiname | 1 -
> debian.oracle/abi/5.4.0-1043.46/abiname | 1 +
> .../{5.4.0-1042.45 => 5.4.0-1043.46}/amd64/oracle | 0
> .../amd64/oracle.compiler | 0
> .../amd64/oracle.modules | 0
> .../amd64/oracle.retpoline | 0
> debian.oracle/abi/5.4.0-1043.46/arm64/ignore | 0
> .../abi/5.4.0-1043.46/arm64/ignore.modules | 0
> .../abi/5.4.0-1043.46/arm64/ignore.retpoline | 0
> .../abi/{5.4.0-1042.45 => 5.4.0-1043.46}/fwinfo | 0
> debian.oracle/changelog | 8 +
> debian.oracle/config/amd64/config.common.amd64 | 25 +
> debian.oracle/config/annotations | 16 +-
> debian.oracle/config/arm64/config.common.arm64 | 28 +
> debian.oracle/config/arm64/config.flavour.oracle | 3 +
> debian.oracle/config/config.common.ubuntu | 651 +++++++-
> debian.oracle/control.d/linux-libc-dev.stub | 12 +
> debian.oracle/control.d/vars.oracle | 4 +-
> debian.oracle/control.stub.in | 2 +-
> debian.oracle/etc/getabis | 1 +
> debian.oracle/etc/kernelconfig | 2 +-
> debian.oracle/rules.d/arm64.mk | 29 +
> drivers/acpi/apei/ghes.c | 67 +-
> drivers/acpi/pci_mcfg.c | 20 +
> drivers/hwmon/Kconfig | 10 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/altra-hwmon.c | 435 ++++++
> drivers/iommu/arm-smmu-v3.c | 2 +-
> drivers/pci/ecam.c | 10 +
> drivers/perf/Kconfig | 14 +
> drivers/perf/Makefile | 2 +
> drivers/perf/arm-cmn.c | 1641 ++++++++++++++++++++
> drivers/perf/arm_dmc620_pmu.c | 748 +++++++++
> drivers/perf/arm_dsu_pmu.c | 65 +-
> drivers/perf/arm_smmuv3_pmu.c | 25 +-
> fs/compat_binfmt_elf.c | 5 +
> include/acpi/ghes.h | 3 +
> include/linux/memblock.h | 8 +-
> include/linux/mm.h | 32 +-
> include/linux/mmzone.h | 11 +-
> include/linux/pci-ecam.h | 1 +
> mm/Kconfig | 3 -
> mm/compaction.c | 4 +-
> mm/memblock.c | 19 +-
> mm/memory-failure.c | 15 +-
> mm/memory_hotplug.c | 4 -
> mm/page_alloc.c | 260 ++--
> 105 files changed, 4234 insertions(+), 708 deletions(-)
> create mode 100644 Documentation/admin-guide/perf/arm-cmn.rst
> create mode 100644 Documentation/devicetree/bindings/perf/arm,cmn.yaml
> delete mode 100644 Documentation/features/vm/numa-memblock/arch-support.txt
> create mode 100644 debian.oracle/abi/5.4.0-1039.42/arm64/ignore
> create mode 100644 debian.oracle/abi/5.4.0-1039.42/arm64/ignore.modules
> create mode 100644 debian.oracle/abi/5.4.0-1039.42/arm64/ignore.retpoline
> delete mode 100644 debian.oracle/abi/5.4.0-1042.45/abiname
> create mode 100644 debian.oracle/abi/5.4.0-1043.46/abiname
> rename debian.oracle/abi/{5.4.0-1042.45 => 5.4.0-1043.46}/amd64/oracle (100%)
> rename debian.oracle/abi/{5.4.0-1042.45 => 5.4.0-1043.46}/amd64/oracle.compiler (100%)
> rename debian.oracle/abi/{5.4.0-1042.45 => 5.4.0-1043.46}/amd64/oracle.modules (100%)
> rename debian.oracle/abi/{5.4.0-1042.45 => 5.4.0-1043.46}/amd64/oracle.retpoline (100%)
> create mode 100644 debian.oracle/abi/5.4.0-1043.46/arm64/ignore
> create mode 100644 debian.oracle/abi/5.4.0-1043.46/arm64/ignore.modules
> create mode 100644 debian.oracle/abi/5.4.0-1043.46/arm64/ignore.retpoline
> rename debian.oracle/abi/{5.4.0-1042.45 => 5.4.0-1043.46}/fwinfo (100%)
> create mode 100644 debian.oracle/config/arm64/config.common.arm64
> create mode 100644 debian.oracle/config/arm64/config.flavour.oracle
> create mode 100644 debian.oracle/control.d/linux-libc-dev.stub
> create mode 100644 debian.oracle/rules.d/arm64.mk
> create mode 100644 drivers/hwmon/altra-hwmon.c
> create mode 100644 drivers/perf/arm-cmn.c
> create mode 100644 drivers/perf/arm_dmc620_pmu.c
>
>
Best regards,
Krzysztof
More information about the kernel-team
mailing list