[PATCH 1/2][SRU][B] i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled

Nivedita Singhvi nivedita.singhvi at canonical.com
Tue Mar 19 15:11:56 UTC 2019

From: Martyna Szapar <martyna.szapar at intel.com>

BugLink: https://bugs.launchpad.net/bugs/1779756

If interface is connected to switch port configured for DCB there are
TX timeouts when bringing up interface. Problem started appearing after
adding in i40e driver code mqprio hardware offload mode. In function
i40e_vsi_configure_bw_alloc was added resetting BW rate which should
be executing when mqprio qdisc is removed but was also when there was
no mqprio qdisc added and DCB was enabled. In this patch was added
additional check for DCB flag so now when DCB is enabled the correct
DCB configs from before mqprio patch are restored.

Signed-off-by: Martyna Szapar <martyna.szapar at intel.com>
Tested-by: Andrew Bowers <andrewx.bowers at intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher at intel.com>
(cherry-picked from commit fa38e30ac73fbb01d7e5d0fd1b12d412fa3ac3ee)
Signed-off-by: Nivedita Singhvi <nivedita.singhvi at canonical.com>
 drivers/net/ethernet/intel/i40e/i40e_main.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 08f7bd9001bc..7895a0af37e6 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5219,15 +5219,17 @@ static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc,
 				       u8 *bw_share)
 	struct i40e_aqc_configure_vsi_tc_bw_data bw_data;
+	struct i40e_pf *pf = vsi->back;
 	i40e_status ret;
 	int i;
-	if (vsi->back->flags & I40E_FLAG_TC_MQPRIO)
+	/* There is no need to reset BW when mqprio mode is on.  */
+	if (pf->flags & I40E_FLAG_TC_MQPRIO)
 		return 0;
-	if (!vsi->mqprio_qopt.qopt.hw) {
+	if (!vsi->mqprio_qopt.qopt.hw && !(pf->flags & I40E_FLAG_DCB_ENABLED)) {
 		ret = i40e_set_bw_limit(vsi, vsi->seid, 0);
 		if (ret)
-			dev_info(&vsi->back->pdev->dev,
+			dev_info(&pf->pdev->dev,
 				 "Failed to reset tx rate for vsi->seid %u\n",
 		return ret;
@@ -5236,12 +5238,11 @@ static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc,
 	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
 		bw_data.tc_bw_credits[i] = bw_share[i];
-	ret = i40e_aq_config_vsi_tc_bw(&vsi->back->hw, vsi->seid, &bw_data,
-				       NULL);
+	ret = i40e_aq_config_vsi_tc_bw(&pf->hw, vsi->seid, &bw_data, NULL);
 	if (ret) {
-		dev_info(&vsi->back->pdev->dev,
+		dev_info(&pf->pdev->dev,
 			 "AQ command Config VSI BW allocation per TC failed = %d\n",
-			 vsi->back->hw.aq.asq_last_status);
+			 pf->hw.aq.asq_last_status);
 		return -EINVAL;

More information about the kernel-team mailing list