ACK/Cmnt: UBUNTU: [SRU] Disco/raspi2: refresh RaspberryPi BSP
Stefan Bader
stefan.bader at canonical.com
Thu Jun 27 15:15:53 UTC 2019
On 31.05.19 12:48, Paolo Pisati wrote:
> BugLink: https://bugs.launchpad.net/bugs/1831219
> BugLink: https://bugs.launchpad.net/bugs/1825235
>
> Impact:
>
> Since the release of Ubuntu Disco, the upstream RaspberryPI BSP has received a
> lot of bug fixes and improvements over the revision imported in disco/raspi2.
>
> Among the fixes, it corrects a patological 'fictious high load situation' we
> inherithed from it:
>
> https://github.com/raspberrypi/linux/issues/2881
>
> Fix:
>
> As part of our SRU process, remove the imported RaspberryPI BSP (first patch in
> the series) and do a fresh import of the latest available revision.
>
> Regression:
>
> Since it contains many changes, it comes with regression risks, but so does
> every stable update series we apply.
>
> Tested on Ubuntu classic for armhf and arm64, proposing for disco/raspi2.
>
> --
>
> The following changes since commit 0a1a41469e81a43f31e528b5196fe7264ebad6d5:
>
> UBUNTU: Ubuntu-raspi2-5.0.0-1009.9 (2019-05-15 11:23:23 -0700)
>
> are available in the git repository at:
>
> git://git.launchpad.net/~p-pisati/ubuntu/+source/linux 6071d538f5d3bdee7167e6c8de4ffbb18c408dcb
>
> for you to fetch changes up to 6071d538f5d3bdee7167e6c8de4ffbb18c408dcb:
>
> UBUNTU: [Config] updateconfigs (2019-05-30 16:09:12 +0000)
>
> ----------------------------------------------------------------
> 6by9 (1):
> staging: bcm2835-camera: Check the error for REPEAT_SEQ_HEADER (#2782 https://github.com/raspberrypi/linux rpi-5.0.y)
>
> Aaron Shaw (1):
> Add Support for JustBoom Audio boards
>
> Alexandre Belloni (1):
> rtc: rv3028: add new driver
>
> Annaliese McDermond (16):
> ASoC: tlv320aic32x4: Break out clock setting into separate function
> ASoC: tlv320aic32x4: Properly Set Processing Blocks
> ASoC: tlv320aic32x4: Model PLL in CCF
> ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF
> ASoC: tlv320aic32x4: Model DAC/ADC dividers in CCF
> ASoC: tlv320aic32x4: Model BDIV divider in CCF
> ASoC: tlv320aic32x4: Control clock gating with CCF
> ASoC: tlv320aic32x4: Move aosr and dosr setting to separate functions
> ASoC: tlv320aic32x4: Dynamically Determine Clocking
> ASoC: tlv320aic32x4: Restructure set_dai_sysclk
> ASoC: tlv320aic32x4: Remove mclk references
> ASoC: tlv320aic32x4: Allow 192000 Sample Rate
> ASoC: tlv320aic32x4: Change author's name
> ASoC: tlv320aic32x4: Update copyright and use SPDX identifier
> ASoC: tlv320aic32x4: Add Switch for Setting Common Mode Voltage
> ASoC: tlv320aic32x4: Add Playback PowerTune Controls
>
> BabuSubashChandar (1):
> Add support for Allo Boss DAC add-on board for Raspberry Pi. (#1924 https://github.com/raspberrypi/linux rpi-5.0.y)
>
> Cheong2K (1):
> brcm: adds support for BCM43341 wifi
>
> Claggy3 (1):
> Update vfpmodule.c
>
> Clive Messer (1):
> Allo Piano DAC boards: Initial 2 channel (stereo) support (#1645 https://github.com/raspberrypi/linux rpi-5.0.y)
>
> Dan Pasanen (1):
> arm: partially revert 702b94bff3c50542a6e4ab9a4f4cef093262fe65
>
> Daniel Matuschek (2):
> Added support for HiFiBerry DAC+
> Added driver for HiFiBerry Amp amplifier add-on board
>
> Dave Stevenson (8):
> gpu:vc4-fkms: Update driver to not use plane->crtc.
> net: lan78xx: Disable TCP Segmentation Offload (TSO https://github.com/raspberrypi/linux rpi-5.0.y)
> staging: bcm2835-camera: Ensure H264 header bytes get a sensible timestamp
> firmware: raspberrypi: Report the fw variant during probe
> firmware: raspberrypi: Report the fw git hash during probe
> gpu: vc4_firmware_kms: Fix up 64 bit compile warnings.
> drm: vc4: Programming the CTM is conditional on running full KMS
> staging: mmal-vchiq: Replace spinlock protecting context_map with mutex
>
> DigitalDreamtime (1):
> Add support for Dion Audio LOCO DAC-AMP HAT
>
> Eric Anholt (14):
> clk: bcm2835: Mark GPIO clocks enabled at boot as critical.
> mm: Remove the PFN busy warning
> raspberrypi-firmware: Export the general transaction function.
> drm/vc4: Add a mode for using the closed firmware for display.
> drm/vc4: Name the primary and cursor planes in fkms.
> drm/vc4: Add DRM_DEBUG_ATOMIC for the insides of fkms.
> drm/vc4: Fix sending of page flip completion events in FKMS mode.
> drm/vc4: Add support for setting DPMS in firmwarekms.
> drm/vc4: Add FB modifier support to firmwarekms.
> drm/vc4: Add missing enable/disable vblank handlers in fkms.
> drm/vc4: Fix warning about vblank interrupts before DRM core is ready.
> drm/vc4: Skip SET_CURSOR_INFO when the cursor contents didn't change.
> drm/vc4: Remove duplicate primary/cursor fields from FKMS driver.
> drm/vc4: Don't wait for vblank on fkms cursor updates.
>
> Ezekiel Bethel (1):
> bcm2835_smi: re-add dereference to fix DMA transfers
>
> FERHAT Nicolas (1):
> Audiophonics I-Sabre 9038Q2M DAC driver
>
> Fe-Pi (1):
> Add support for Fe-Pi audio sound card. (#1867 https://github.com/raspberrypi/linux rpi-5.0.y)
>
> Florian Meier (2):
> dmaengine: Add support for BCM2708
> ASoC: Add support for Rpi-DAC
>
> GT (1):
> ASoC: decommissioning driver for 3Dlab Nano soundcard
>
> Gordon Garrity (1):
> Add IQaudIO Sound Card support for Raspberry Pi
>
> Harm Hanemaaijer (1):
> Speed up console framebuffer imageblit function
>
> Henrique Gontijo (1):
> configs: Enable PIDs cgroup
>
> HiFiBerry (1):
> Added driver for the HiFiBerry DAC+ ADC (#2694 https://github.com/raspberrypi/linux rpi-5.0.y)
>
> IQaudIO (1):
> Added IQaudIO Pi-Codec board support (#2969 https://github.com/raspberrypi/linux rpi-5.0.y)
>
> James Hughes (2):
> AXI performance monitor driver (#2222 https://github.com/raspberrypi/linux rpi-5.0.y)
> Update issue templates (#2736 https://github.com/raspberrypi/linux rpi-5.0.y)
>
> James Hutchinson (1):
> media: m88ds3103: serialize reset messages in m88ds3103_set_frontend
>
> Jean-Francois Dagenais (1):
> w1: ds2408: reset on output_write retry with readback
>
> Joshua Emele (1):
> lan78xx: Debounce link events to minimize poll storm
>
> Khem Raj (1):
> build/arm64: Add rules for .dtbo files for dts overlays
>
> Klaus Schulz (1):
> sound: pcm512x-codec: Adding 352.8kHz samplerate support
>
> Luke Wren (3):
> Add /dev/gpiomem device for rootless user GPIO access
> Add SMI driver
> Add SMI NAND driver
>
> Mariusz Bialonczyk (2):
> w1: fix the resume command API
> w1: ds2482: cosmetic fixes after 54865314f5a1
>
> Mark Brown (1):
> ASoC: tlv320aic32x4: Only enable with common clock
>
> Martin Sperl (2):
> Register the clocks early during the boot process, so that special/critical clocks can get enabled early on in the boot process avoiding the risk of disabling a clock, pll_divider or pll when a claiming driver fails to install propperly - maybe it needs to defer.
> MISC: bcm2835: smi: use clock manager and fix reload issues
>
> Matt Flax (2):
> New AudioInjector.net Pi soundcard with low jitter audio in and out.
> Add support for the AudioInjector.net Octo sound card
>
> Matthias Reichl (4):
> ASoC: pcm512x: implement set_tdm_slot interface
> ASoC: Add driver for Cirrus Logic Audio Card
> rpi-wm8804-soundcard: drop PWRDN register writes
> rpi-wm8804-soundcard: configure wm8804 clocks only on rate change
>
> Michael Zoran (4):
> Add arm64 configuration and device tree differences. Disable MMC_BCM2835_SDHOST and MMC_BCM2835 since these drivers are crashing at the moment.
> ARM64/DWC_OTG: Port dwc_otg driver to ARM64
> ARM64: Round-Robin dispatch IRQs between CPUs.
> ARM64: Force hardware emulation of deprecated instructions.
>
> Miquel (1):
> sound: Support for Dion Audio LOCO-V2 DAC-AMP HAT
>
> Nick Bulleid (1):
> Add ability to export gpio used by gpio-poweroff
>
> Noralf Trønnes (8):
> irqchip: bcm2835: Add FIQ support
> irqchip: irq-bcm2835: Add 2836 FIQ support
> dmaengine: bcm2835: Load driver early and support legacy API
> watchdog: bcm2835: Support setting reboot partition
> i2c: bcm2835: Add debug support
> char: broadcom: Add vcio module
> firmware: bcm2835: Support ARCH_BCM270x
> ARM: bcm2835: Set Serial number and Revision
>
> P33M (3):
> rpi_display: add backlight driver and overlay
> dts: Increase default coherent pool size
> lan78xx: use default alignment for rx buffers
>
> Pantelis Antoniou (1):
> OF: DT-Overlay configfs interface
>
> Paolo Pisati (2):
> UBUNTU: raspberrypi: remove the old RaspberryPi BSP
> UBUNTU: [Config] updateconfigs
>
> Peter Malkin (1):
> Driver support for Google voiceHAT soundcard.
>
> Peter Robinson (1):
> arm: dts: overlays: rpi-sense: add upstream humidity compatible
>
> Phil Elwell (53):
> Revert "rtc: pcf8523: properly handle oscillator stop bit"
> Protect __release_resource against resources without parents
> irq-bcm2836: Prevent spurious interrupts, and trap them early
> irq-bcm2836: Avoid "Invalid trigger warning"
> spi: spidev: Completely disable the spidev warning
> rtc: Add SPI alias for pcf2123 driver
> clk-bcm2835: Mark used PLLs and dividers CRITICAL
> clk-bcm2835: Add claim-clocks property
> clk-bcm2835: Read max core clock from firmware
> sound: Demote deferral errors to INFO level
> ASoC: Add prompt for ICS43432 codec
> irqchip: irq-bcm2836: Remove regmap and syscon use
> lan78xx: Enable LEDs and auto-negotiation
> amba_pl011: Don't use DT aliases for numbering
> amba_pl011: Round input clock up
> amba_pl011: Insert mb() for correct FIFO handling
> amba_pl011: Add cts-event-workaround DT property
> Adding bcm2835-sdhost driver, and an overlay to enable it
> scripts: Add mkknlimg and knlinfo scripts from tools repo
> BCM270x_DT: Add pwr_led, and the required "input" trigger
> gpio-poweroff: Allow it to work on Raspberry Pi
> mfd: Add Raspberry Pi Sense HAT core driver
> hci_h5: Don't send conf_req when ACTIVE
> Revert "build/arm64: Add rules for .dtbo files for dts overlays"
> mcp2515: Use DT-supplied interrupt flags
> cgroup: Disable cgroup "memory" by default
> dwc-otg: FIQ: Fix "bad mode in data abort handler"
> ARM: Activate FIQs to avoid __irq_startup warnings
> serial: 8250: bcm2835aux - suppress EPROBE_DEFER
> i2c-gpio: Also set bus numbers from reg property
> lan78xx: Read initial EEE status from DT
> firmware/raspberrypi: Notify firmware of a reboot
> irqchip: irq-bcm2835: Calc. FIQ_START at boot-time
> of: configfs: Use of_overlay_fdt_apply API call
> brcmfmac: Re-enable firmware roaming support
> lan78xx: Move enabling of EEE into PHY init code
> sc16is7xx: Don't spin if no data received
> brcmfmac: Disable ARP offloading when promiscuous
> gpiolib: Don't prevent IRQ usage of output GPIOs
> lan78xx: disable interrupts for PHY irqs
> net: lan78xx: Support auto-downshift to 100Mb/s
> arm64: dts: broadcom: Enable fixups for overlays
> spi: spi-bcm2835: Re-enable HW CS
> spi: spi-bcm2835: Disable forced software CS
> configs: Enable the AD193x codecs
> lan78xx: EEE support is now a PHY property
> Revert "staging: vchiq: delete vchiq_killable.h"
> Revert "staging: vchiq_2835_arm: quit using custom down_interruptible()"
> Revert "staging: vchiq: switch to wait_for_completion_killable"
> Revert "staging: vchiq: rework remove_event handling"
> bcm2835-dma: Add support for per-channel flags
> sound: Fixes for audioinjector-octo under 4.19
> BCM270X_DT: Also set coherent_pool=1M for BT Pis
>
> Phil Howard (2):
> rtc: rv3028: Add backup switchover mode support
> dt-bindings: rv3028 backup switchover support
>
> Raashid Muhammed (1):
> Add support for Allo Piano DAC 2.1 plus add-on board for Raspberry Pi.
>
> Ram Chandrasekar (1):
> drivers: thermal: step_wise: add support for hysteresis
>
> Russell Joyce (2):
> configs: Enable netdev LED trigger
> configs: Enable ICS-43432 I2S microphone module
>
> Sam Nazarko (1):
> smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 by default
>
> Samuel Hsu (2):
> Input: ili210x - fetch touchscreen geometry from DT
> Input: ili210x - add DT binding document
>
> Serge Schneider (3):
> Add rpi-poe-fan driver
> drivers: thermal: step_wise: avoid throttling at hysteresis temperature after dropping below it
> mfd: Add rpi_sense_core of compatible string
>
> Siarhei Siamashka (1):
> fbdev: add FBIOCOPYAREA ioctl
>
> Stefan Wahren (4):
> hwmon: raspberrypi: Prevent voltage low warnings from filling log
> firmware: raspberrypi: Add backward compatible get_throttled
> overlays: Add PiGlow overlay
> configs: enable LED driver for PiGlow
>
> Steve Glendinning (1):
> smsx95xx: fix crimes against truesize
>
> Tim Gover (3):
> vcsm: VideoCore shared memory service for BCM2835
> ASoC: Add generic RPI driver for simple soundcards.
> ASoC: Create a generic Pi Hat WM8804 driver
>
> Waldemar Brodkorb (1):
> Add driver for rpi-proto
>
> allocom (1):
> Driver and overlay for Allo Katana DAC
>
> b-ak (2):
> ASoC: Add support for AudioSense-Pi add-on soundcard
> ASoC: tlv320aic32x4: SND_SOC_DAPM_MICBIAS is deprecated
>
> detule (1):
> vchiq_2835_arm: Implement a DMA pool for small bulk transfers (#2699 https://github.com/raspberrypi/linux rpi-5.0.y)
>
> dev-3Dlab (1):
> ASoC: add driver for 3Dlab Nano soundcard (#2758 https://github.com/raspberrypi/linux rpi-5.0.y)
>
> escalator2015 (1):
> New driver for RRA DigiDAC1 soundcard using WM8741 + WM8804
>
> gellert (1):
> MMC: added alternative MMC driver
>
> gtrainavicius (1):
> Support for Blokas Labs pisound board
>
> hdoverobinson (1):
> added capture_clear option to pps-gpio via dtoverlay (#2433 https://github.com/raspberrypi/linux rpi-5.0.y)
>
> notro (2):
> pinctrl-bcm2835: Set base to 0 give expected gpio numbering
> BCM2708: Add core Device Tree support
>
> popcornmix (25):
> Allow mac address to be set in smsc95xx
> firmware: Updated mailbox header
> reboot: Use power off rather than busy spinning when halt is requested
> bcm: Make RASPBERRYPI_POWER depend on PM
> bcm2835-rng: Avoid initialising if already enabled
> Main bcm2708/bcm2709 linux port
> Add dwc_otg driver
> bcm2708 framebuffer driver
> vc_mem: Add vc_mem driver for querying firmware memory addresses
> Revert "Add SMI NAND driver"
> Add cpufreq driver
> Add Chris Boot's i2c driver
> Added Device IDs for August DVB-T 205
> Improve __copy_to_user and __copy_from_user performance
> ASoC: Add Kconfig and Makefile for sound/soc/bcm
> bcm2835-virtgpio: Virtual GPIO driver
> net: Add non-mainline source for rtl8192cu wlan
> config: Add default configs
> cache: export clean and invalidate
> vc4_fkms: Apply firmware overscan offset to hardware cursor
> vc4_firmware_kms: fix build
> hid: Reduce default mouse polling interval to 60Hz
> cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT
> Revert "staging: bcm2835-audio: Drop DT dependency"
> .gitignore: Add *.dtbo explicitly
>
> .gitignore | 3 +-
> .../devicetree/bindings/input/ilitek,ili2xxx.txt | 26 +
> Documentation/devicetree/bindings/rtc/rtc.txt | 18 +-
> arch/arm/boot/dts/bcm2708-rpi-0-w.dts | 2 +-
> arch/arm/boot/dts/bcm270x.dtsi | 2 +-
> arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 2 +-
> arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 2 +-
> arch/arm/boot/dts/bcm283x.dtsi | 2 +-
> .../dts/overlays/3dlab-nano-player-overlay.dts | 32 -
> arch/arm/boot/dts/overlays/Makefile | 8 +-
> arch/arm/boot/dts/overlays/README | 117 +++-
> .../dts/overlays/audioinjector-addons-overlay.dts | 19 +-
> arch/arm/boot/dts/overlays/draws-overlay.dts | 200 ++++++
> arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts | 39 ++
> arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts | 20 +-
> arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts | 16 +
> arch/arm/boot/dts/overlays/ilitek251x-overlay.dts | 45 ++
> .../boot/dts/overlays/iqaudio-codec-overlay.dts | 42 ++
> arch/arm/boot/dts/overlays/max98357a-overlay.dts | 84 +++
> arch/arm/boot/dts/overlays/piglow-overlay.dts | 97 +++
> arch/arm/boot/dts/overlays/rpi-sense-overlay.dts | 2 +-
> .../boot/dts/overlays/sc16is750-i2c-overlay.dts | 3 +-
> .../boot/dts/overlays/sc16is752-i2c-overlay.dts | 2 +-
> arch/arm/boot/dts/overlays/sdio-overlay.dts | 9 +
> arch/arm/boot/dts/overlays/udrc-overlay.dts | 128 ++++
> arch/arm/configs/bcm2709_defconfig | 19 +-
> arch/arm/configs/bcmrpi_defconfig | 18 +-
> arch/arm64/configs/bcmrpi3_defconfig | 23 +-
> .../abi/5.0.0-1008.8/arm64/raspi2.modules | 1 -
> .../abi/5.0.0-1008.8/armhf/raspi2.modules | 1 -
> debian.raspi2/config/config.common.ubuntu | 6 +-
> drivers/char/broadcom/vc_sm/Makefile | 2 +-
> drivers/char/broadcom/vc_sm/vc_vchi_sm.c | 6 +-
> drivers/char/broadcom/vc_sm/vmcs_sm.c | 14 +-
> drivers/dma/bcm2835-dma.c | 10 +-
> drivers/gpu/drm/vc4/vc4_firmware_kms.c | 15 +-
> drivers/gpu/drm/vc4/vc4_kms.c | 6 +-
> drivers/i2c/busses/i2c-bcm2835.c | 1 -
> drivers/input/touchscreen/ili210x.c | 321 +++++----
> drivers/media/dvb-frontends/m88ds3103.c | 9 +-
> drivers/mmc/host/bcm2835-mmc.c | 23 +-
> drivers/mmc/host/bcm2835-sdhost.c | 5 +
> drivers/net/usb/lan78xx.c | 4 +-
> .../broadcom/brcm80211/brcmfmac/cfg80211.c | 2 -
> .../wireless/broadcom/brcm80211/brcmfmac/common.c | 2 +-
> drivers/rtc/Kconfig | 9 +
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-rv3028.c | 749 +++++++++++++++++++++
> .../staging/vc04_services/bcm2835-audio/bcm2835.c | 31 +-
> .../vc04_services/bcm2835-camera/mmal-vchiq.c | 13 +-
> .../interface/vchiq_arm/vchiq_2835_arm.c | 3 +-
> .../vc04_services/interface/vchiq_arm/vchiq_arm.c | 22 +-
> .../interface/vchiq_arm/vchiq_connected.c | 1 +
> .../vc04_services/interface/vchiq_arm/vchiq_core.c | 85 ++-
> .../vc04_services/interface/vchiq_arm/vchiq_core.h | 12 +-
> .../interface/vchiq_arm/vchiq_killable.h | 55 ++
> .../vc04_services/interface/vchiq_arm/vchiq_util.c | 7 +-
> drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c | 9 +-
> drivers/usb/host/dwc_otg/dwc_otg_driver.c | 3 +-
> drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 6 +-
> drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h | 1 +
> drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 28 +-
> drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 10 +-
> drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c | 9 +-
> drivers/video/fbdev/bcm2708_fb.c | 292 +++++---
> drivers/w1/masters/ds2482.c | 18 +-
> drivers/w1/slaves/w1_ds2408.c | 76 ++-
> drivers/w1/w1_io.c | 3 +-
> include/soc/bcm2835/raspberrypi-firmware.h | 1 +
> sound/soc/bcm/3dlab-nano-player.c | 370 ----------
> sound/soc/bcm/Kconfig | 20 +-
> sound/soc/bcm/Makefile | 6 +-
> sound/soc/bcm/allo-katana-codec.c | 60 +-
> sound/soc/bcm/audioinjector-octo-soundcard.c | 2 +-
> sound/soc/bcm/i-sabre-q2m.c | 157 +++++
> sound/soc/bcm/iqaudio-codec.c | 250 +++++++
> sound/soc/bcm/pisound.c | 8 +-
> sound/soc/codecs/Kconfig | 12 +-
> sound/soc/codecs/Makefile | 4 +-
> sound/soc/codecs/cs42xx8-i2c.c | 7 +
> sound/soc/codecs/cs42xx8.c | 2 +
> sound/soc/codecs/i-sabre-codec.c | 392 +++++++++++
> sound/soc/codecs/i-sabre-codec.h | 42 ++
> sound/soc/codecs/pcm512x.c | 2 +-
> sound/soc/codecs/tlv320aic32x4-clk.c | 483 +++++++++++++
> sound/soc/codecs/tlv320aic32x4-i2c.c | 18 +-
> sound/soc/codecs/tlv320aic32x4-spi.c | 18 +-
> sound/soc/codecs/tlv320aic32x4.c | 475 +++++++------
> sound/soc/codecs/tlv320aic32x4.h | 14 +
> 89 files changed, 4061 insertions(+), 1133 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
> delete mode 100644 arch/arm/boot/dts/overlays/3dlab-nano-player-overlay.dts
> create mode 100644 arch/arm/boot/dts/overlays/draws-overlay.dts
> create mode 100644 arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts
> create mode 100644 arch/arm/boot/dts/overlays/ilitek251x-overlay.dts
> create mode 100644 arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts
> create mode 100644 arch/arm/boot/dts/overlays/max98357a-overlay.dts
> create mode 100644 arch/arm/boot/dts/overlays/piglow-overlay.dts
> create mode 100644 arch/arm/boot/dts/overlays/udrc-overlay.dts
> create mode 100644 drivers/rtc/rtc-rv3028.c
> create mode 100644 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_killable.h
> delete mode 100644 sound/soc/bcm/3dlab-nano-player.c
> create mode 100644 sound/soc/bcm/i-sabre-q2m.c
> create mode 100644 sound/soc/bcm/iqaudio-codec.c
> create mode 100644 sound/soc/codecs/i-sabre-codec.c
> create mode 100644 sound/soc/codecs/i-sabre-codec.h
> create mode 100644 sound/soc/codecs/tlv320aic32x4-clk.c
>
Unreviewable but ok as custom work geared towards a limited number of testable
systems. Separated in its own tree as well.
Acked-by: Stefan Bader <stefan.bader at canonical.com>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <https://lists.ubuntu.com/archives/kernel-team/attachments/20190627/a610c2b2/attachment.sig>
More information about the kernel-team
mailing list