APPLIED(B/C): [B/C/D][PATCH v2 0/1] Support Edge Gateway's WIFI LED

[Khaled Elmously]

On 2018-10-17 19:41:40 , Wen-chien Jesse Sung wrote:
> BugLink: https://launchpad.net/bugs/1798330
> 
> == Impact ==
> The WIFI LED of Marvell 88W8897 is not enabled by default
> (there's no code for controlling LED in mwifiex). It is
> requested to be ON and OFF when the radio is on and off
> accordingly.
> 
> == Fix ==
> The LEDs are connected to GPIO pins on the Marvell
> WiFi/Bluetooth combo module, thus they can only be controlled
> via firmware.
> 
> == Test Case ==
> # ifconfig wlan0 [on|off]
> and see if the LEDs work properly.
> 
> == Risk of Regression ==
> PCI sub IDs of the host bridge are used to determine if we're
> really running on an Edge Gateway, and we already have these
> patches in Xenial kernels quite a while. Risk should be reasonably
> low.
> 
> Wen-chien Jesse Sung (1):
>   UBUNTU: SAUCE: mwifiex: Switch WiFi LED state according to the device
>     status
> 
>  drivers/net/wireless/marvell/mwifiex/fw.h     | 18 ++++++++++++
>  drivers/net/wireless/marvell/mwifiex/main.c   |  5 +++-
>  drivers/net/wireless/marvell/mwifiex/main.h   |  6 ++++
>  drivers/net/wireless/marvell/mwifiex/pcie.c   | 10 +++++++
>  .../net/wireless/marvell/mwifiex/sta_cmd.c    | 29 +++++++++++++++++++
>  .../wireless/marvell/mwifiex/sta_cmdresp.c    |  2 ++
>  .../net/wireless/marvell/mwifiex/sta_ioctl.c  | 18 ++++++++++++
>  7 files changed, 87 insertions(+), 1 deletion(-)
> 
> -- 
> 2.17.1
> 
> 
> -- 
> kernel-team mailing list
> kernel-team at lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/kernel-team