[X/raspi2] [SRU] [PULL] CM3 support (and misc fixes)
Colin Ian King
colin.king at canonical.com
Wed May 17 09:07:03 UTC 2017
On 17/05/17 09:49, Paolo Pisati wrote:
> BugLink: https://bugs.launchpad.net/bugs/1691407
>
> To properly support the Compute Module 3[1] we need a dtb update, and while here i
> imported all the fixes that were sitting in the raspberry-4.4 upstream tree -
> there are 35 patches in total, roughly splitted like this:
>
> ~20 patches are code fixes: 5 for clocks, 5 for drm/vc4, 1 usb, 1 for vpf (does
> not apply to us), 1 for gpio, 4 for snd, 1 rng driver and 1 for the lirc driver
> ~10 dts patches:
> -1 new dts to support the new raspberry zero w board
> -and a bunch of fixes for various dtb overlays (pi sound, disable-wifi, mcp
> adc,
> -the remaning patches are config changes for their bcm defconfig
>
> The resulting kernel was tested on rpi2/rpi3 with ubuntu classic and ubuntu
> core, and on the compute module 3.
>
> 1: https://www.raspberrypi.org/blog/compute-module-3-launch/
>
>
> The following changes since commit dea9f1f7a223b41073fbd741f251f1f2b149fd6f:
>
> UBUNTU: Ubuntu-raspi2-4.4.0-1055.62 (2017-04-27 16:39:33 -0300)
>
> are available in the git repository at:
>
> git://git.launchpad.net/~p-pisati/ubuntu/+source/linux
>
> for you to fetch changes up to 9343cee6d8b4b58d830b3a982856de4a73f384e2:
>
> BCM270X_DT: Add bcm2708-rpi-0-w.dts (2017-05-16 11:58:41 +0200)
>
> ----------------------------------------------------------------
> Aaron Shaw (1):
> Add driver_name properties to JustBoom drivers (#1787)
>
> Alan Yiding Wang (1):
> BCM270X_DT: Add overlay for enc28j60 on SPI2
>
> Alex Tucker (1):
> Add support for Silicon Labs Si7013/20/21 humidity/temperature sensor. (#1765)
>
> Boris Brezillon (4):
> clk: bcm2835: Fix ->fixed_divider of pllh_aux
> clk: bcm: Support rate change propagation on bcm2835 clocks
> clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock
> clk: bcm: Fix 'maybe-uninitialized' warning in bcm2835_clock_choose_div_and_prate()
>
> Claggy3 (1):
> Update vfpmodule.c
>
> Eric Anholt (5):
> drm/vc4: Fix sending of page flip completion events in FKMS mode.
> clk: bcm2835: Don't rate change PLLs on behalf of DSI PLL dividers (v2).
> drm/vc4: Fulfill user BO creation requests from the kernel BO cache.
> drm/vc4: Fix OOPSes from trying to cache a partially constructed BO.
> drm/vc4: Verify at boot that CMA doesn't cross a 256MB boundary.
>
> Georgii Staroselskii (1):
> BCM270X_DT: overlays/*-overlay.dtb -> overlays/*.dtbo (#1752)
>
> Ioan-Adrian Ratiu (1):
> Revert "HID: dragonrise: fix HID Descriptor for 0x0006 PID"
>
> JamesH65 (1):
> gpio_mem: Remove unnecessary dev_info output (#1830)
>
> Marek Vasut (1):
> configfs: Remove ppos increment in configfs_write_bin_file
>
> Martin Cerveny (1):
> dwc_otg: fix summarize urb->actual_length for isochronous transfers
>
> Phil Elwell (10):
> lirc_rpi: Delete vestigial gpio_in_pull parameter
> BCM270X_DT: Add i2c-sensor overlay
> BCM270X_DT: Add pi3-disable-wifi overlay
> BCM270X_DT: Add spi0-cs overlay
> Revert "bcm2835-i2s: Changes for allowing asymmetric sample formats. (#1783)"
> BCM270X_DT: Enable UART0 on CM3
> config: Add CONFIG_MD_M25P80 and CONFIG_MD_SPI_NOR
> config: More USB config options for bcm2709_defconfig (#1805)
> BCM270X_DT: Add reference to audio_pins to CM dtb
> BCM270X_DT: Add bcm2708-rpi-0-w.dts
>
> Scott Ellis (1):
> Add overlay for mcp3008 adc (#1818)
>
> gtrainavicius (3):
> Pisound dynamic overlay (#1760)
> pisound improvements: (#1778)
> bcm2835-i2s: Changes for allowing asymmetric sample formats. (#1783)
>
> popcornmix (3):
> bcm2835-rng: Avoid initialising if already enabled
> config: Add CONFIG_DM_CACHE See: https://github.com/raspberrypi/linux/issues/1793
> config: add slcan kernel module
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/bcm2708-rpi-0-w.dts | 200 ++++++++++++++++++++
> arch/arm/boot/dts/bcm2708-rpi-cm.dtsi | 5 +
> arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 4 +
> arch/arm/boot/dts/overlays/Makefile | 5 +
> arch/arm/boot/dts/overlays/README | 51 ++++-
> .../boot/dts/overlays/enc28j60-spi2-overlay.dts | 47 +++++
> arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts | 41 +++++
> arch/arm/boot/dts/overlays/mcp3008-overlay.dts | 205 +++++++++++++++++++++
> .../boot/dts/overlays/pi3-disable-wifi-overlay.dts | 13 ++
> arch/arm/boot/dts/overlays/pisound-overlay.dts | 94 +++++-----
> arch/arm/boot/dts/overlays/spi0-cs-overlay.dts | 29 +++
> arch/arm/configs/bcm2709_defconfig | 19 ++
> arch/arm/configs/bcmrpi_defconfig | 4 +
> arch/arm/vfp/vfpmodule.c | 27 ++-
> drivers/base/dma-contiguous.c | 1 +
> drivers/char/broadcom/bcm2835-gpiomem.c | 2 -
> drivers/char/hw_random/bcm2835-rng.c | 7 +-
> drivers/clk/bcm/clk-bcm2835.c | 116 ++++++++++--
> drivers/gpu/drm/vc4/vc4_bo.c | 21 ++-
> drivers/gpu/drm/vc4/vc4_firmware_kms.c | 15 ++
> drivers/gpu/drm/vc4/vc4_v3d.c | 18 ++
> drivers/hid/hid-dr.c | 58 ------
> drivers/staging/media/lirc/lirc_rpi.c | 6 -
> drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 2 +
> fs/configfs/file.c | 2 -
> mm/cma.c | 2 +
> sound/soc/bcm/justboom-dac.c | 1 +
> sound/soc/bcm/justboom-digi.c | 1 +
> sound/soc/bcm/pisound.c | 177 +++++++++++++++---
> 30 files changed, 1001 insertions(+), 173 deletions(-)
> create mode 100644 arch/arm/boot/dts/bcm2708-rpi-0-w.dts
> create mode 100644 arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts
> create mode 100644 arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts
> create mode 100755 arch/arm/boot/dts/overlays/mcp3008-overlay.dts
> create mode 100644 arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts
> create mode 100644 arch/arm/boot/dts/overlays/spi0-cs-overlay.dts
>
Hi Paolo,
The SRU bug report is missing the usual SRU items such as regression
potential, test case etc.
Are there any tests that can check to see if this works or not?
Colin
More information about the kernel-team
mailing list