[PATCH 4.2.y-ckt 056/218] mmc: sdhci: fix data timeout (part 2)

[Kamal Mostafa]

4.2.8-ckt7 -stable review patch.  If anyone has any objections, please let me know.

---8<------------------------------------------------------------

From: Russell King <rmk+kernel at arm.linux.org.uk>

commit 7f05538af71c7d30b5fc821cbe9f318edc645961 upstream.

The calculation for the timeout based on the number of card clocks is
incorrect.  The calculation assumed:

	timeout in microseconds = clock cycles / clock in Hz

which is clearly a several orders of magnitude wrong.  Fix this by
multiplying the clock cycles by 1000000 prior to dividing by the Hz
based clock.  Also, as per part 1, ensure that the division rounds
up.

As this needs 64-bit math via do_div(), avoid it if the clock cycles
is zero.

Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
Signed-off-by: Adrian Hunter <adrian.hunter at intel.com>
Tested-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson at linaro.org>
Signed-off-by: Kamal Mostafa <kamal at canonical.com>
---
 drivers/mmc/host/sdhci.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 3c13169..57dd499 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -668,8 +668,19 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 		target_timeout = cmd->busy_timeout * 1000;
 	else {
 		target_timeout = DIV_ROUND_UP(data->timeout_ns, 1000);
-		if (host->clock)
-			target_timeout += data->timeout_clks / host->clock;
+		if (host->clock && data->timeout_clks) {
+			unsigned long long val;
+
+			/*
+			 * data->timeout_clks is in units of clock cycles.
+			 * host->clock is in Hz.  target_timeout is in us.
+			 * Hence, us = 1000000 * cycles / Hz.  Round up.
+			 */
+			val = 1000000 * data->timeout_clks;
+			if (do_div(val, host->clock))
+				target_timeout++;
+			target_timeout += val;
+		}
 	}
 
 	/*
-- 
2.7.4