[PATCH Wily SRU] powerpc/eeh: Fix recursive fenced PHB on Broadcom shiner adapter

[tim.gardner at canonical.com]

From: Gavin Shan <gwshan at linux.vnet.ibm.com>

BugLink: http://bugs.launchpad.net/bugs/1532942

Similar to commit b6541db ("powerpc/eeh: Block PCI config access
upon frozen PE"), this blocks the PCI config space of Broadcom
Shiner adapter until PE reset is completed, to avoid recursive
fenced PHB when dumping PCI config registers during the period
of error recovery.

   ~# lspci -ns 0003:03:00.0
   0003:03:00.0 0200: 14e4:168a (rev 10)
   ~# lspci -s 0003:03:00.0
   0003:03:00.0 Ethernet controller: Broadcom Corporation \
                NetXtreme II BCM57800 1/10 Gigabit Ethernet (rev 10)

Signed-off-by: Gavin Shan <gwshan at linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe at ellerman.id.au>
(cherry picked from commit 353169acf1858bb2dc3f91475dafabce547de14c)
Signed-off-by: Tim Gardner <tim.gardner at canonical.com>
---
 arch/powerpc/platforms/powernv/eeh-powernv.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 7cf0df8..d01a0c1 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -443,11 +443,14 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	 * that PE to block its config space.
 	 *
 	 * Broadcom Austin 4-ports NICs (14e4:1657)
+	 * Broadcom Shiner 4-ports 1G NICs (14e4:168a)
 	 * Broadcom Shiner 2-ports 10G NICs (14e4:168e)
 	 */
 	if ((pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
 	     pdn->device_id == 0x1657) ||
 	    (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
+	     pdn->device_id == 0x168a) ||
+	    (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
 	     pdn->device_id == 0x168e))
 		edev->pe->state |= EEH_PE_CFG_RESTRICTED;
 
-- 
1.9.1