[3.16.y-ckt stable] Patch "can: sja1000: clear interrupts on start" has been added to staging queue

[Luis Henriques]

This is a note to let you know that I have just added a patch titled

    can: sja1000: clear interrupts on start

to the linux-3.16.y-queue branch of the 3.16.y-ckt extended stable tree 
which can be found at:

    http://kernel.ubuntu.com/git/ubuntu/linux.git/log/?h=linux-3.16.y-queue

This patch is scheduled to be released in version 3.16.7-ckt22.

If you, or anyone else, feels it should not be added to this tree, please 
reply to this email.

For more information about the 3.16.y-ckt tree, see
https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable

Thanks.
-Luis

------

>From b5f16f882147ecd513a03fbc5685307bfbf7e351 Mon Sep 17 00:00:00 2001
From: Mirza Krak <mirza.krak at hostmobility.com>
Date: Tue, 10 Nov 2015 14:59:34 +0100
Subject: can: sja1000: clear interrupts on start

commit 7cecd9ab80f43972c056dc068338f7bcc407b71c upstream.

According to SJA1000 data sheet error-warning (EI) interrupt is not
cleared by setting the controller in to reset-mode.

Then if we have the following case:
- system is suspended (echo mem > /sys/power/state) and SJA1000 is left
  in operating state
- A bus error condition occurs which activates EI interrupt, system is
  still suspended which means EI interrupt will be not be handled nor
  cleared.

If the above two events occur, on resume there is no way to return the
SJA1000 to operating state, except to cycle power to it.

By simply reading the IR register on start we will clear any previous
conditions that could be present.

Signed-off-by: Mirza Krak <mirza.krak at hostmobility.com>
Reported-by: Christian Magnusson <Christian.Magnusson at semcon.com>
Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
Signed-off-by: Luis Henriques <luis.henriques at canonical.com>
---
 drivers/net/can/sja1000/sja1000.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index f31499a32d7d..052b4edaab43 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -183,6 +183,9 @@ static void sja1000_start(struct net_device *dev)
 	priv->write_reg(priv, SJA1000_RXERR, 0x0);
 	priv->read_reg(priv, SJA1000_ECC);

+	/* clear interrupt flags */
+	priv->read_reg(priv, SJA1000_IR);
+
 	/* leave reset mode */
 	set_normal_mode(dev);
 }