[PATCH 2/2] EDAC, skx_edac: Add EDAC driver for Skylake
Tim Gardner
tim.gardner at canonical.com
Wed Aug 24 19:56:53 UTC 2016
From: Tony Luck <tony.luck at intel.com>
BugLink: http://bugs.launchpad.net/bugs/1591815
This is an entirely new driver instead of yet another set of patches
to sb_edac.c because:
1) Mapping from PCI devices to socket/memory controller is significantly
different. Skylake scatters devices on a socket across a number of
PCI buses.
2) There is an extra level of interleaving via the "mcroute" register
that would be a little messy to squeeze into the old driver.
3) Validation is getting too expensive. Changes to sb_edac need to
be checked against Sandy Bridge, Ivy Bridge, Haswell, Broadwell and
Knights Landing.
Acked-by: Aristeu Rozanski <aris at redhat.com>
Acked-by: Borislav Petkov <bp at suse.de>
Signed-off-by: Tony Luck <tony.luck at intel.com>
Signed-off-by: Linus Torvalds <torvalds at linux-foundation.org>
(cherry picked from commit 4ec656bdf43a13a655a8259b79dd63bc1f0b1e41)
Signed-off-by: Tim Gardner <tim.gardner at canonical.com>
---
MAINTAINERS | 6 +
drivers/edac/Kconfig | 8 +
drivers/edac/Makefile | 1 +
drivers/edac/skx_edac.c | 1121 +++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 1136 insertions(+)
create mode 100644 drivers/edac/skx_edac.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 76e764f..5ab262c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4087,6 +4087,12 @@ W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/sb_edac.c
+EDAC-SKYLAKE
+M: Tony Luck <tony.luck at intel.com>
+L: linux-edac at vger.kernel.org
+S: Maintained
+F: drivers/edac/skx_edac.c
+
EDAC-XGENE
APPLIED MICRO (APM) X-GENE SOC EDAC
M: Loc Ho <lho at apm.com>
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index ef25000..0f62d41 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -251,6 +251,14 @@ config EDAC_SBRIDGE
Support for error detection and correction the Intel
Sandy Bridge, Ivy Bridge and Haswell Integrated Memory Controllers.
+config EDAC_SKX
+ tristate "Intel Skylake server Integrated MC"
+ depends on EDAC_MM_EDAC && PCI && X86_64 && X86_MCE_INTEL
+ depends on PCI_MMCONFIG
+ help
+ Support for error detection and correction the Intel
+ Skylake server Integrated Memory Controllers.
+
config EDAC_MPC85XX
tristate "Freescale MPC83xx / MPC85xx"
depends on EDAC_MM_EDAC && FSL_SOC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index dbf53e0..6c43bfa 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_EDAC_I5400) += i5400_edac.o
obj-$(CONFIG_EDAC_I7300) += i7300_edac.o
obj-$(CONFIG_EDAC_I7CORE) += i7core_edac.o
obj-$(CONFIG_EDAC_SBRIDGE) += sb_edac.o
+obj-$(CONFIG_EDAC_SKX) += skx_edac.o
obj-$(CONFIG_EDAC_E7XXX) += e7xxx_edac.o
obj-$(CONFIG_EDAC_E752X) += e752x_edac.o
obj-$(CONFIG_EDAC_I82443BXGX) += i82443bxgx_edac.o
diff --git a/drivers/edac/skx_edac.c b/drivers/edac/skx_edac.c
new file mode 100644
index 0000000..0ff4878
--- /dev/null
+++ b/drivers/edac/skx_edac.c
@@ -0,0 +1,1121 @@
+/*
+ * EDAC driver for Intel(R) Xeon(R) Skylake processors
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+#include <linux/smp.h>
+#include <linux/bitmap.h>
+#include <linux/math64.h>
+#include <linux/mod_devicetable.h>
+#include <asm/cpu_device_id.h>
+#include <asm/processor.h>
+#include <asm/mce.h>
+
+#include "edac_core.h"
+
+#define SKX_REVISION " Ver: 1.0 "
+
+/*
+ * Debug macros
+ */
+#define skx_printk(level, fmt, arg...) \
+ edac_printk(level, "skx", fmt, ##arg)
+
+#define skx_mc_printk(mci, level, fmt, arg...) \
+ edac_mc_chipset_printk(mci, level, "skx", fmt, ##arg)
+
+/*
+ * Get a bit field at register value <v>, from bit <lo> to bit <hi>
+ */
+#define GET_BITFIELD(v, lo, hi) \
+ (((v) & GENMASK_ULL((hi), (lo))) >> (lo))
+
+static LIST_HEAD(skx_edac_list);
+
+static u64 skx_tolm, skx_tohm;
+
+#define NUM_IMC 2 /* memory controllers per socket */
+#define NUM_CHANNELS 3 /* channels per memory controller */
+#define NUM_DIMMS 2 /* Max DIMMS per channel */
+
+#define MASK26 0x3FFFFFF /* Mask for 2^26 */
+#define MASK29 0x1FFFFFFF /* Mask for 2^29 */
+
+/*
+ * Each cpu socket contains some pci devices that provide global
+ * information, and also some that are local to each of the two
+ * memory controllers on the die.
+ */
+struct skx_dev {
+ struct list_head list;
+ u8 bus[4];
+ struct pci_dev *sad_all;
+ struct pci_dev *util_all;
+ u32 mcroute;
+ struct skx_imc {
+ struct mem_ctl_info *mci;
+ u8 mc; /* system wide mc# */
+ u8 lmc; /* socket relative mc# */
+ u8 src_id, node_id;
+ struct skx_channel {
+ struct pci_dev *cdev;
+ struct skx_dimm {
+ u8 close_pg;
+ u8 bank_xor_enable;
+ u8 fine_grain_bank;
+ u8 rowbits;
+ u8 colbits;
+ } dimms[NUM_DIMMS];
+ } chan[NUM_CHANNELS];
+ } imc[NUM_IMC];
+};
+static int skx_num_sockets;
+
+struct skx_pvt {
+ struct skx_imc *imc;
+};
+
+struct decoded_addr {
+ struct skx_dev *dev;
+ u64 addr;
+ int socket;
+ int imc;
+ int channel;
+ u64 chan_addr;
+ int sktways;
+ int chanways;
+ int dimm;
+ int rank;
+ int channel_rank;
+ u64 rank_address;
+ int row;
+ int column;
+ int bank_address;
+ int bank_group;
+};
+
+static struct skx_dev *get_skx_dev(u8 bus, u8 idx)
+{
+ struct skx_dev *d;
+
+ list_for_each_entry(d, &skx_edac_list, list) {
+ if (d->bus[idx] == bus)
+ return d;
+ }
+
+ return NULL;
+}
+
+enum munittype {
+ CHAN0, CHAN1, CHAN2, SAD_ALL, UTIL_ALL, SAD
+};
+
+struct munit {
+ u16 did;
+ u16 devfn[NUM_IMC];
+ u8 busidx;
+ u8 per_socket;
+ enum munittype mtype;
+};
+
+/*
+ * List of PCI device ids that we need together with some device
+ * number and function numbers to tell which memory controller the
+ * device belongs to.
+ */
+static const struct munit skx_all_munits[] = {
+ { 0x2054, { }, 1, 1, SAD_ALL },
+ { 0x2055, { }, 1, 1, UTIL_ALL },
+ { 0x2040, { PCI_DEVFN(10, 0), PCI_DEVFN(12, 0) }, 2, 2, CHAN0 },
+ { 0x2044, { PCI_DEVFN(10, 4), PCI_DEVFN(12, 4) }, 2, 2, CHAN1 },
+ { 0x2048, { PCI_DEVFN(11, 0), PCI_DEVFN(13, 0) }, 2, 2, CHAN2 },
+ { 0x208e, { }, 1, 0, SAD },
+ { }
+};
+
+/*
+ * We use the per-socket device 0x2016 to count how many sockets are present,
+ * and to detemine which PCI buses are associated with each socket. Allocate
+ * and build the full list of all the skx_dev structures that we need here.
+ */
+static int get_all_bus_mappings(void)
+{
+ struct pci_dev *pdev, *prev;
+ struct skx_dev *d;
+ u32 reg;
+ int ndev = 0;
+
+ prev = NULL;
+ for (;;) {
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x2016, prev);
+ if (!pdev)
+ break;
+ ndev++;
+ d = kzalloc(sizeof(*d), GFP_KERNEL);
+ if (!d) {
+ pci_dev_put(pdev);
+ return -ENOMEM;
+ }
+ pci_read_config_dword(pdev, 0xCC, ®);
+ d->bus[0] = GET_BITFIELD(reg, 0, 7);
+ d->bus[1] = GET_BITFIELD(reg, 8, 15);
+ d->bus[2] = GET_BITFIELD(reg, 16, 23);
+ d->bus[3] = GET_BITFIELD(reg, 24, 31);
+ edac_dbg(2, "busses: %x, %x, %x, %x\n",
+ d->bus[0], d->bus[1], d->bus[2], d->bus[3]);
+ list_add_tail(&d->list, &skx_edac_list);
+ skx_num_sockets++;
+ prev = pdev;
+ }
+
+ return ndev;
+}
+
+static int get_all_munits(const struct munit *m)
+{
+ struct pci_dev *pdev, *prev;
+ struct skx_dev *d;
+ u32 reg;
+ int i = 0, ndev = 0;
+
+ prev = NULL;
+ for (;;) {
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL, m->did, prev);
+ if (!pdev)
+ break;
+ ndev++;
+ if (m->per_socket == NUM_IMC) {
+ for (i = 0; i < NUM_IMC; i++)
+ if (m->devfn[i] == pdev->devfn)
+ break;
+ if (i == NUM_IMC)
+ goto fail;
+ }
+ d = get_skx_dev(pdev->bus->number, m->busidx);
+ if (!d)
+ goto fail;
+
+ /* Be sure that the device is enabled */
+ if (unlikely(pci_enable_device(pdev) < 0)) {
+ skx_printk(KERN_ERR,
+ "Couldn't enable %04x:%04x\n", PCI_VENDOR_ID_INTEL, m->did);
+ goto fail;
+ }
+
+ switch (m->mtype) {
+ case CHAN0: case CHAN1: case CHAN2:
+ pci_dev_get(pdev);
+ d->imc[i].chan[m->mtype].cdev = pdev;
+ break;
+ case SAD_ALL:
+ pci_dev_get(pdev);
+ d->sad_all = pdev;
+ break;
+ case UTIL_ALL:
+ pci_dev_get(pdev);
+ d->util_all = pdev;
+ break;
+ case SAD:
+ /*
+ * one of these devices per core, including cores
+ * that don't exist on this SKU. Ignore any that
+ * read a route table of zero, make sure all the
+ * non-zero values match.
+ */
+ pci_read_config_dword(pdev, 0xB4, ®);
+ if (reg != 0) {
+ if (d->mcroute == 0)
+ d->mcroute = reg;
+ else if (d->mcroute != reg) {
+ skx_printk(KERN_ERR,
+ "mcroute mismatch\n");
+ goto fail;
+ }
+ }
+ ndev--;
+ break;
+ }
+
+ prev = pdev;
+ }
+
+ return ndev;
+fail:
+ pci_dev_put(pdev);
+ return -ENODEV;
+}
+
+const struct x86_cpu_id skx_cpuids[] = {
+ { X86_VENDOR_INTEL, 6, 0x55, 0, 0 }, /* Skylake */
+ { }
+};
+MODULE_DEVICE_TABLE(x86cpu, skx_cpuids);
+
+static u8 get_src_id(struct skx_dev *d)
+{
+ u32 reg;
+
+ pci_read_config_dword(d->util_all, 0xF0, ®);
+
+ return GET_BITFIELD(reg, 12, 14);
+}
+
+static u8 skx_get_node_id(struct skx_dev *d)
+{
+ u32 reg;
+
+ pci_read_config_dword(d->util_all, 0xF4, ®);
+
+ return GET_BITFIELD(reg, 0, 2);
+}
+
+static int get_dimm_attr(u32 reg, int lobit, int hibit, int add, int minval,
+ int maxval, char *name)
+{
+ u32 val = GET_BITFIELD(reg, lobit, hibit);
+
+ if (val < minval || val > maxval) {
+ edac_dbg(2, "bad %s = %d (raw=%x)\n", name, val, reg);
+ return -EINVAL;
+ }
+ return val + add;
+}
+
+#define IS_DIMM_PRESENT(mtr) GET_BITFIELD((mtr), 15, 15)
+
+#define numrank(reg) get_dimm_attr((reg), 12, 13, 0, 1, 2, "ranks")
+#define numrow(reg) get_dimm_attr((reg), 2, 4, 12, 1, 6, "rows")
+#define numcol(reg) get_dimm_attr((reg), 0, 1, 10, 0, 2, "cols")
+
+static int get_width(u32 mtr)
+{
+ switch (GET_BITFIELD(mtr, 8, 9)) {
+ case 0:
+ return DEV_X4;
+ case 1:
+ return DEV_X8;
+ case 2:
+ return DEV_X16;
+ }
+ return DEV_UNKNOWN;
+}
+
+static int skx_get_hi_lo(void)
+{
+ struct pci_dev *pdev;
+ u32 reg;
+
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x2034, NULL);
+ if (!pdev) {
+ edac_dbg(0, "Can't get tolm/tohm\n");
+ return -ENODEV;
+ }
+
+ pci_read_config_dword(pdev, 0xD0, ®);
+ skx_tolm = reg;
+ pci_read_config_dword(pdev, 0xD4, ®);
+ skx_tohm = reg;
+ pci_read_config_dword(pdev, 0xD8, ®);
+ skx_tohm |= (u64)reg << 32;
+
+ pci_dev_put(pdev);
+ edac_dbg(2, "tolm=%llx tohm=%llx\n", skx_tolm, skx_tohm);
+
+ return 0;
+}
+
+static int get_dimm_info(u32 mtr, u32 amap, struct dimm_info *dimm,
+ struct skx_imc *imc, int chan, int dimmno)
+{
+ int banks = 16, ranks, rows, cols, npages;
+ u64 size;
+
+ if (!IS_DIMM_PRESENT(mtr))
+ return 0;
+ ranks = numrank(mtr);
+ rows = numrow(mtr);
+ cols = numcol(mtr);
+
+ /*
+ * Compute size in 8-byte (2^3) words, then shift to MiB (2^20)
+ */
+ size = ((1ull << (rows + cols + ranks)) * banks) >> (20 - 3);
+ npages = MiB_TO_PAGES(size);
+
+ edac_dbg(0, "mc#%d: channel %d, dimm %d, %lld Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
+ imc->mc, chan, dimmno, size, npages,
+ banks, ranks, rows, cols);
+
+ imc->chan[chan].dimms[dimmno].close_pg = GET_BITFIELD(mtr, 0, 0);
+ imc->chan[chan].dimms[dimmno].bank_xor_enable = GET_BITFIELD(mtr, 9, 9);
+ imc->chan[chan].dimms[dimmno].fine_grain_bank = GET_BITFIELD(amap, 0, 0);
+ imc->chan[chan].dimms[dimmno].rowbits = rows;
+ imc->chan[chan].dimms[dimmno].colbits = cols;
+
+ dimm->nr_pages = npages;
+ dimm->grain = 32;
+ dimm->dtype = get_width(mtr);
+ dimm->mtype = MEM_DDR4;
+ dimm->edac_mode = EDAC_SECDED; /* likely better than this */
+ snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u",
+ imc->src_id, imc->lmc, chan, dimmno);
+
+ return 1;
+}
+
+#define SKX_GET_MTMTR(dev, reg) \
+ pci_read_config_dword((dev), 0x87c, ®)
+
+static bool skx_check_ecc(struct pci_dev *pdev)
+{
+ u32 mtmtr;
+
+ SKX_GET_MTMTR(pdev, mtmtr);
+
+ return !!GET_BITFIELD(mtmtr, 2, 2);
+}
+
+static int skx_get_dimm_config(struct mem_ctl_info *mci)
+{
+ struct skx_pvt *pvt = mci->pvt_info;
+ struct skx_imc *imc = pvt->imc;
+ struct dimm_info *dimm;
+ int i, j;
+ u32 mtr, amap;
+ int ndimms;
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ ndimms = 0;
+ pci_read_config_dword(imc->chan[i].cdev, 0x8C, &amap);
+ for (j = 0; j < NUM_DIMMS; j++) {
+ dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+ mci->n_layers, i, j, 0);
+ pci_read_config_dword(imc->chan[i].cdev,
+ 0x80 + 4*j, &mtr);
+ ndimms += get_dimm_info(mtr, amap, dimm, imc, i, j);
+ }
+ if (ndimms && !skx_check_ecc(imc->chan[0].cdev)) {
+ skx_printk(KERN_ERR, "ECC is disabled on imc %d\n", imc->mc);
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+
+static void skx_unregister_mci(struct skx_imc *imc)
+{
+ struct mem_ctl_info *mci = imc->mci;
+
+ if (!mci)
+ return;
+
+ edac_dbg(0, "MC%d: mci = %p\n", imc->mc, mci);
+
+ /* Remove MC sysfs nodes */
+ edac_mc_del_mc(mci->pdev);
+
+ edac_dbg(1, "%s: free mci struct\n", mci->ctl_name);
+ kfree(mci->ctl_name);
+ edac_mc_free(mci);
+}
+
+static int skx_register_mci(struct skx_imc *imc)
+{
+ struct mem_ctl_info *mci;
+ struct edac_mc_layer layers[2];
+ struct pci_dev *pdev = imc->chan[0].cdev;
+ struct skx_pvt *pvt;
+ int rc;
+
+ /* allocate a new MC control structure */
+ layers[0].type = EDAC_MC_LAYER_CHANNEL;
+ layers[0].size = NUM_CHANNELS;
+ layers[0].is_virt_csrow = false;
+ layers[1].type = EDAC_MC_LAYER_SLOT;
+ layers[1].size = NUM_DIMMS;
+ layers[1].is_virt_csrow = true;
+ mci = edac_mc_alloc(imc->mc, ARRAY_SIZE(layers), layers,
+ sizeof(struct skx_pvt));
+
+ if (unlikely(!mci))
+ return -ENOMEM;
+
+ edac_dbg(0, "MC#%d: mci = %p\n", imc->mc, mci);
+
+ /* Associate skx_dev and mci for future usage */
+ imc->mci = mci;
+ pvt = mci->pvt_info;
+ pvt->imc = imc;
+
+ mci->ctl_name = kasprintf(GFP_KERNEL, "Skylake Socket#%d IMC#%d",
+ imc->node_id, imc->lmc);
+ mci->mtype_cap = MEM_FLAG_DDR4;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE;
+ mci->edac_cap = EDAC_FLAG_NONE;
+ mci->mod_name = "skx_edac.c";
+ mci->dev_name = pci_name(imc->chan[0].cdev);
+ mci->mod_ver = SKX_REVISION;
+ mci->ctl_page_to_phys = NULL;
+
+ rc = skx_get_dimm_config(mci);
+ if (rc < 0)
+ goto fail;
+
+ /* record ptr to the generic device */
+ mci->pdev = &pdev->dev;
+
+ /* add this new MC control structure to EDAC's list of MCs */
+ if (unlikely(edac_mc_add_mc(mci))) {
+ edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
+ rc = -EINVAL;
+ goto fail;
+ }
+
+ return 0;
+
+fail:
+ kfree(mci->ctl_name);
+ edac_mc_free(mci);
+ imc->mci = NULL;
+ return rc;
+}
+
+#define SKX_MAX_SAD 24
+
+#define SKX_GET_SAD(d, i, reg) \
+ pci_read_config_dword((d)->sad_all, 0x60 + 8 * (i), ®)
+#define SKX_GET_ILV(d, i, reg) \
+ pci_read_config_dword((d)->sad_all, 0x64 + 8 * (i), ®)
+
+#define SKX_SAD_MOD3MODE(sad) GET_BITFIELD((sad), 30, 31)
+#define SKX_SAD_MOD3(sad) GET_BITFIELD((sad), 27, 27)
+#define SKX_SAD_LIMIT(sad) (((u64)GET_BITFIELD((sad), 7, 26) << 26) | MASK26)
+#define SKX_SAD_MOD3ASMOD2(sad) GET_BITFIELD((sad), 5, 6)
+#define SKX_SAD_ATTR(sad) GET_BITFIELD((sad), 3, 4)
+#define SKX_SAD_INTERLEAVE(sad) GET_BITFIELD((sad), 1, 2)
+#define SKX_SAD_ENABLE(sad) GET_BITFIELD((sad), 0, 0)
+
+#define SKX_ILV_REMOTE(tgt) (((tgt) & 8) == 0)
+#define SKX_ILV_TARGET(tgt) ((tgt) & 7)
+
+static bool skx_sad_decode(struct decoded_addr *res)
+{
+ struct skx_dev *d = list_first_entry(&skx_edac_list, typeof(*d), list);
+ u64 addr = res->addr;
+ int i, idx, tgt, lchan, shift;
+ u32 sad, ilv;
+ u64 limit, prev_limit;
+ int remote = 0;
+
+ /* Simple sanity check for I/O space or out of range */
+ if (addr >= skx_tohm || (addr >= skx_tolm && addr < BIT_ULL(32))) {
+ edac_dbg(0, "Address %llx out of range\n", addr);
+ return false;
+ }
+
+restart:
+ prev_limit = 0;
+ for (i = 0; i < SKX_MAX_SAD; i++) {
+ SKX_GET_SAD(d, i, sad);
+ limit = SKX_SAD_LIMIT(sad);
+ if (SKX_SAD_ENABLE(sad)) {
+ if (addr >= prev_limit && addr <= limit)
+ goto sad_found;
+ }
+ prev_limit = limit + 1;
+ }
+ edac_dbg(0, "No SAD entry for %llx\n", addr);
+ return false;
+
+sad_found:
+ SKX_GET_ILV(d, i, ilv);
+
+ switch (SKX_SAD_INTERLEAVE(sad)) {
+ case 0:
+ idx = GET_BITFIELD(addr, 6, 8);
+ break;
+ case 1:
+ idx = GET_BITFIELD(addr, 8, 10);
+ break;
+ case 2:
+ idx = GET_BITFIELD(addr, 12, 14);
+ break;
+ case 3:
+ idx = GET_BITFIELD(addr, 30, 32);
+ break;
+ }
+
+ tgt = GET_BITFIELD(ilv, 4 * idx, 4 * idx + 3);
+
+ /* If point to another node, find it and start over */
+ if (SKX_ILV_REMOTE(tgt)) {
+ if (remote) {
+ edac_dbg(0, "Double remote!\n");
+ return false;
+ }
+ remote = 1;
+ list_for_each_entry(d, &skx_edac_list, list) {
+ if (d->imc[0].src_id == SKX_ILV_TARGET(tgt))
+ goto restart;
+ }
+ edac_dbg(0, "Can't find node %d\n", SKX_ILV_TARGET(tgt));
+ return false;
+ }
+
+ if (SKX_SAD_MOD3(sad) == 0)
+ lchan = SKX_ILV_TARGET(tgt);
+ else {
+ switch (SKX_SAD_MOD3MODE(sad)) {
+ case 0:
+ shift = 6;
+ break;
+ case 1:
+ shift = 8;
+ break;
+ case 2:
+ shift = 12;
+ break;
+ default:
+ edac_dbg(0, "illegal mod3mode\n");
+ return false;
+ }
+ switch (SKX_SAD_MOD3ASMOD2(sad)) {
+ case 0:
+ lchan = (addr >> shift) % 3;
+ break;
+ case 1:
+ lchan = (addr >> shift) % 2;
+ break;
+ case 2:
+ lchan = (addr >> shift) % 2;
+ lchan = (lchan << 1) | ~lchan;
+ break;
+ case 3:
+ lchan = ((addr >> shift) % 2) << 1;
+ break;
+ }
+ lchan = (lchan << 1) | (SKX_ILV_TARGET(tgt) & 1);
+ }
+
+ res->dev = d;
+ res->socket = d->imc[0].src_id;
+ res->imc = GET_BITFIELD(d->mcroute, lchan * 3, lchan * 3 + 2);
+ res->channel = GET_BITFIELD(d->mcroute, lchan * 2 + 18, lchan * 2 + 19);
+
+ edac_dbg(2, "%llx: socket=%d imc=%d channel=%d\n",
+ res->addr, res->socket, res->imc, res->channel);
+ return true;
+}
+
+#define SKX_MAX_TAD 8
+
+#define SKX_GET_TADBASE(d, mc, i, reg) \
+ pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x850 + 4 * (i), ®)
+#define SKX_GET_TADWAYNESS(d, mc, i, reg) \
+ pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x880 + 4 * (i), ®)
+#define SKX_GET_TADCHNILVOFFSET(d, mc, ch, i, reg) \
+ pci_read_config_dword((d)->imc[mc].chan[ch].cdev, 0x90 + 4 * (i), ®)
+
+#define SKX_TAD_BASE(b) ((u64)GET_BITFIELD((b), 12, 31) << 26)
+#define SKX_TAD_SKT_GRAN(b) GET_BITFIELD((b), 4, 5)
+#define SKX_TAD_CHN_GRAN(b) GET_BITFIELD((b), 6, 7)
+#define SKX_TAD_LIMIT(b) (((u64)GET_BITFIELD((b), 12, 31) << 26) | MASK26)
+#define SKX_TAD_OFFSET(b) ((u64)GET_BITFIELD((b), 4, 23) << 26)
+#define SKX_TAD_SKTWAYS(b) (1 << GET_BITFIELD((b), 10, 11))
+#define SKX_TAD_CHNWAYS(b) (GET_BITFIELD((b), 8, 9) + 1)
+
+/* which bit used for both socket and channel interleave */
+static int skx_granularity[] = { 6, 8, 12, 30 };
+
+static u64 skx_do_interleave(u64 addr, int shift, int ways, u64 lowbits)
+{
+ addr >>= shift;
+ addr /= ways;
+ addr <<= shift;
+
+ return addr | (lowbits & ((1ull << shift) - 1));
+}
+
+static bool skx_tad_decode(struct decoded_addr *res)
+{
+ int i;
+ u32 base, wayness, chnilvoffset;
+ int skt_interleave_bit, chn_interleave_bit;
+ u64 channel_addr;
+
+ for (i = 0; i < SKX_MAX_TAD; i++) {
+ SKX_GET_TADBASE(res->dev, res->imc, i, base);
+ SKX_GET_TADWAYNESS(res->dev, res->imc, i, wayness);
+ if (SKX_TAD_BASE(base) <= res->addr && res->addr <= SKX_TAD_LIMIT(wayness))
+ goto tad_found;
+ }
+ edac_dbg(0, "No TAD entry for %llx\n", res->addr);
+ return false;
+
+tad_found:
+ res->sktways = SKX_TAD_SKTWAYS(wayness);
+ res->chanways = SKX_TAD_CHNWAYS(wayness);
+ skt_interleave_bit = skx_granularity[SKX_TAD_SKT_GRAN(base)];
+ chn_interleave_bit = skx_granularity[SKX_TAD_CHN_GRAN(base)];
+
+ SKX_GET_TADCHNILVOFFSET(res->dev, res->imc, res->channel, i, chnilvoffset);
+ channel_addr = res->addr - SKX_TAD_OFFSET(chnilvoffset);
+
+ if (res->chanways == 3 && skt_interleave_bit > chn_interleave_bit) {
+ /* Must handle channel first, then socket */
+ channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit,
+ res->chanways, channel_addr);
+ channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit,
+ res->sktways, channel_addr);
+ } else {
+ /* Handle socket then channel. Preserve low bits from original address */
+ channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit,
+ res->sktways, res->addr);
+ channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit,
+ res->chanways, res->addr);
+ }
+
+ res->chan_addr = channel_addr;
+
+ edac_dbg(2, "%llx: chan_addr=%llx sktways=%d chanways=%d\n",
+ res->addr, res->chan_addr, res->sktways, res->chanways);
+ return true;
+}
+
+#define SKX_MAX_RIR 4
+
+#define SKX_GET_RIRWAYNESS(d, mc, ch, i, reg) \
+ pci_read_config_dword((d)->imc[mc].chan[ch].cdev, \
+ 0x108 + 4 * (i), ®)
+#define SKX_GET_RIRILV(d, mc, ch, idx, i, reg) \
+ pci_read_config_dword((d)->imc[mc].chan[ch].cdev, \
+ 0x120 + 16 * idx + 4 * (i), ®)
+
+#define SKX_RIR_VALID(b) GET_BITFIELD((b), 31, 31)
+#define SKX_RIR_LIMIT(b) (((u64)GET_BITFIELD((b), 1, 11) << 29) | MASK29)
+#define SKX_RIR_WAYS(b) (1 << GET_BITFIELD((b), 28, 29))
+#define SKX_RIR_CHAN_RANK(b) GET_BITFIELD((b), 16, 19)
+#define SKX_RIR_OFFSET(b) ((u64)(GET_BITFIELD((b), 2, 15) << 26))
+
+static bool skx_rir_decode(struct decoded_addr *res)
+{
+ int i, idx, chan_rank;
+ int shift;
+ u32 rirway, rirlv;
+ u64 rank_addr, prev_limit = 0, limit;
+
+ if (res->dev->imc[res->imc].chan[res->channel].dimms[0].close_pg)
+ shift = 6;
+ else
+ shift = 13;
+
+ for (i = 0; i < SKX_MAX_RIR; i++) {
+ SKX_GET_RIRWAYNESS(res->dev, res->imc, res->channel, i, rirway);
+ limit = SKX_RIR_LIMIT(rirway);
+ if (SKX_RIR_VALID(rirway)) {
+ if (prev_limit <= res->chan_addr &&
+ res->chan_addr <= limit)
+ goto rir_found;
+ }
+ prev_limit = limit;
+ }
+ edac_dbg(0, "No RIR entry for %llx\n", res->addr);
+ return false;
+
+rir_found:
+ rank_addr = res->chan_addr >> shift;
+ rank_addr /= SKX_RIR_WAYS(rirway);
+ rank_addr <<= shift;
+ rank_addr |= res->chan_addr & GENMASK_ULL(shift - 1, 0);
+
+ res->rank_address = rank_addr;
+ idx = (res->chan_addr >> shift) % SKX_RIR_WAYS(rirway);
+
+ SKX_GET_RIRILV(res->dev, res->imc, res->channel, idx, i, rirlv);
+ res->rank_address = rank_addr - SKX_RIR_OFFSET(rirlv);
+ chan_rank = SKX_RIR_CHAN_RANK(rirlv);
+ res->channel_rank = chan_rank;
+ res->dimm = chan_rank / 4;
+ res->rank = chan_rank % 4;
+
+ edac_dbg(2, "%llx: dimm=%d rank=%d chan_rank=%d rank_addr=%llx\n",
+ res->addr, res->dimm, res->rank,
+ res->channel_rank, res->rank_address);
+ return true;
+}
+
+static u8 skx_close_row[] = {
+ 15, 16, 17, 18, 20, 21, 22, 28, 10, 11, 12, 13, 29, 30, 31, 32, 33
+};
+static u8 skx_close_column[] = {
+ 3, 4, 5, 14, 19, 23, 24, 25, 26, 27
+};
+static u8 skx_open_row[] = {
+ 14, 15, 16, 20, 28, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33
+};
+static u8 skx_open_column[] = {
+ 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
+};
+static u8 skx_open_fine_column[] = {
+ 3, 4, 5, 7, 8, 9, 10, 11, 12, 13
+};
+
+static int skx_bits(u64 addr, int nbits, u8 *bits)
+{
+ int i, res = 0;
+
+ for (i = 0; i < nbits; i++)
+ res |= ((addr >> bits[i]) & 1) << i;
+ return res;
+}
+
+static int skx_bank_bits(u64 addr, int b0, int b1, int do_xor, int x0, int x1)
+{
+ int ret = GET_BITFIELD(addr, b0, b0) | (GET_BITFIELD(addr, b1, b1) << 1);
+
+ if (do_xor)
+ ret ^= GET_BITFIELD(addr, x0, x0) | (GET_BITFIELD(addr, x1, x1) << 1);
+
+ return ret;
+}
+
+static bool skx_mad_decode(struct decoded_addr *r)
+{
+ struct skx_dimm *dimm = &r->dev->imc[r->imc].chan[r->channel].dimms[r->dimm];
+ int bg0 = dimm->fine_grain_bank ? 6 : 13;
+
+ if (dimm->close_pg) {
+ r->row = skx_bits(r->rank_address, dimm->rowbits, skx_close_row);
+ r->column = skx_bits(r->rank_address, dimm->colbits, skx_close_column);
+ r->column |= 0x400; /* C10 is autoprecharge, always set */
+ r->bank_address = skx_bank_bits(r->rank_address, 8, 9, dimm->bank_xor_enable, 22, 28);
+ r->bank_group = skx_bank_bits(r->rank_address, 6, 7, dimm->bank_xor_enable, 20, 21);
+ } else {
+ r->row = skx_bits(r->rank_address, dimm->rowbits, skx_open_row);
+ if (dimm->fine_grain_bank)
+ r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_fine_column);
+ else
+ r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_column);
+ r->bank_address = skx_bank_bits(r->rank_address, 18, 19, dimm->bank_xor_enable, 22, 23);
+ r->bank_group = skx_bank_bits(r->rank_address, bg0, 17, dimm->bank_xor_enable, 20, 21);
+ }
+ r->row &= (1u << dimm->rowbits) - 1;
+
+ edac_dbg(2, "%llx: row=%x col=%x bank_addr=%d bank_group=%d\n",
+ r->addr, r->row, r->column, r->bank_address,
+ r->bank_group);
+ return true;
+}
+
+static bool skx_decode(struct decoded_addr *res)
+{
+
+ return skx_sad_decode(res) && skx_tad_decode(res) &&
+ skx_rir_decode(res) && skx_mad_decode(res);
+}
+
+#ifdef CONFIG_EDAC_DEBUG
+/*
+ * Debug feature. Make /sys/kernel/debug/skx_edac_test/addr.
+ * Write an address to this file to exercise the address decode
+ * logic in this driver.
+ */
+static struct dentry *skx_test;
+static u64 skx_fake_addr;
+
+static int debugfs_u64_set(void *data, u64 val)
+{
+ struct decoded_addr res;
+
+ res.addr = val;
+ skx_decode(&res);
+
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
+
+static struct dentry *mydebugfs_create(const char *name, umode_t mode,
+ struct dentry *parent, u64 *value)
+{
+ return debugfs_create_file(name, mode, parent, value, &fops_u64_wo);
+}
+
+static void setup_skx_debug(void)
+{
+ skx_test = debugfs_create_dir("skx_edac_test", NULL);
+ mydebugfs_create("addr", S_IWUSR, skx_test, &skx_fake_addr);
+}
+
+static void teardown_skx_debug(void)
+{
+ debugfs_remove_recursive(skx_test);
+}
+#else
+static void setup_skx_debug(void)
+{
+}
+
+static void teardown_skx_debug(void)
+{
+}
+#endif /*CONFIG_EDAC_DEBUG*/
+
+static void skx_mce_output_error(struct mem_ctl_info *mci,
+ const struct mce *m,
+ struct decoded_addr *res)
+{
+ enum hw_event_mc_err_type tp_event;
+ char *type, *optype, msg[256];
+ bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0);
+ bool overflow = GET_BITFIELD(m->status, 62, 62);
+ bool uncorrected_error = GET_BITFIELD(m->status, 61, 61);
+ bool recoverable;
+ u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52);
+ u32 mscod = GET_BITFIELD(m->status, 16, 31);
+ u32 errcode = GET_BITFIELD(m->status, 0, 15);
+ u32 optypenum = GET_BITFIELD(m->status, 4, 6);
+
+ recoverable = GET_BITFIELD(m->status, 56, 56);
+
+ if (uncorrected_error) {
+ if (ripv) {
+ type = "FATAL";
+ tp_event = HW_EVENT_ERR_FATAL;
+ } else {
+ type = "NON_FATAL";
+ tp_event = HW_EVENT_ERR_UNCORRECTED;
+ }
+ } else {
+ type = "CORRECTED";
+ tp_event = HW_EVENT_ERR_CORRECTED;
+ }
+
+ /*
+ * According with Table 15-9 of the Intel Architecture spec vol 3A,
+ * memory errors should fit in this mask:
+ * 000f 0000 1mmm cccc (binary)
+ * where:
+ * f = Correction Report Filtering Bit. If 1, subsequent errors
+ * won't be shown
+ * mmm = error type
+ * cccc = channel
+ * If the mask doesn't match, report an error to the parsing logic
+ */
+ if (!((errcode & 0xef80) == 0x80)) {
+ optype = "Can't parse: it is not a mem";
+ } else {
+ switch (optypenum) {
+ case 0:
+ optype = "generic undef request error";
+ break;
+ case 1:
+ optype = "memory read error";
+ break;
+ case 2:
+ optype = "memory write error";
+ break;
+ case 3:
+ optype = "addr/cmd error";
+ break;
+ case 4:
+ optype = "memory scrubbing error";
+ break;
+ default:
+ optype = "reserved";
+ break;
+ }
+ }
+
+ snprintf(msg, sizeof(msg),
+ "%s%s err_code:%04x:%04x socket:%d imc:%d rank:%d bg:%d ba:%d row:%x col:%x",
+ overflow ? " OVERFLOW" : "",
+ (uncorrected_error && recoverable) ? " recoverable" : "",
+ mscod, errcode,
+ res->socket, res->imc, res->rank,
+ res->bank_group, res->bank_address, res->row, res->column);
+
+ edac_dbg(0, "%s\n", msg);
+
+ /* Call the helper to output message */
+ edac_mc_handle_error(tp_event, mci, core_err_cnt,
+ m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0,
+ res->channel, res->dimm, -1,
+ optype, msg);
+}
+
+static int skx_mce_check_error(struct notifier_block *nb, unsigned long val,
+ void *data)
+{
+ struct mce *mce = (struct mce *)data;
+ struct decoded_addr res;
+ struct mem_ctl_info *mci;
+ char *type;
+
+ if (get_edac_report_status() == EDAC_REPORTING_DISABLED)
+ return NOTIFY_DONE;
+
+ /* ignore unless this is memory related with an address */
+ if ((mce->status & 0xefff) >> 7 != 1 || !(mce->status & MCI_STATUS_ADDRV))
+ return NOTIFY_DONE;
+
+ res.addr = mce->addr;
+ if (!skx_decode(&res))
+ return NOTIFY_DONE;
+ mci = res.dev->imc[res.imc].mci;
+
+ if (mce->mcgstatus & MCG_STATUS_MCIP)
+ type = "Exception";
+ else
+ type = "Event";
+
+ skx_mc_printk(mci, KERN_DEBUG, "HANDLING MCE MEMORY ERROR\n");
+
+ skx_mc_printk(mci, KERN_DEBUG, "CPU %d: Machine Check %s: %Lx "
+ "Bank %d: %016Lx\n", mce->extcpu, type,
+ mce->mcgstatus, mce->bank, mce->status);
+ skx_mc_printk(mci, KERN_DEBUG, "TSC %llx ", mce->tsc);
+ skx_mc_printk(mci, KERN_DEBUG, "ADDR %llx ", mce->addr);
+ skx_mc_printk(mci, KERN_DEBUG, "MISC %llx ", mce->misc);
+
+ skx_mc_printk(mci, KERN_DEBUG, "PROCESSOR %u:%x TIME %llu SOCKET "
+ "%u APIC %x\n", mce->cpuvendor, mce->cpuid,
+ mce->time, mce->socketid, mce->apicid);
+
+ skx_mce_output_error(mci, mce, &res);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block skx_mce_dec = {
+ .notifier_call = skx_mce_check_error,
+};
+
+static void skx_remove(void)
+{
+ int i, j;
+ struct skx_dev *d, *tmp;
+
+ edac_dbg(0, "\n");
+
+ list_for_each_entry_safe(d, tmp, &skx_edac_list, list) {
+ list_del(&d->list);
+ for (i = 0; i < NUM_IMC; i++) {
+ skx_unregister_mci(&d->imc[i]);
+ for (j = 0; j < NUM_CHANNELS; j++)
+ pci_dev_put(d->imc[i].chan[j].cdev);
+ }
+ pci_dev_put(d->util_all);
+ pci_dev_put(d->sad_all);
+
+ kfree(d);
+ }
+}
+
+/*
+ * skx_init:
+ * make sure we are running on the correct cpu model
+ * search for all the devices we need
+ * check which DIMMs are present.
+ */
+int __init skx_init(void)
+{
+ const struct x86_cpu_id *id;
+ const struct munit *m;
+ int rc = 0, i;
+ u8 mc = 0, src_id, node_id;
+ struct skx_dev *d;
+
+ edac_dbg(2, "\n");
+
+ id = x86_match_cpu(skx_cpuids);
+ if (!id)
+ return -ENODEV;
+
+ rc = skx_get_hi_lo();
+ if (rc)
+ return rc;
+
+ rc = get_all_bus_mappings();
+ if (rc < 0)
+ goto fail;
+ if (rc == 0) {
+ edac_dbg(2, "No memory controllers found\n");
+ return -ENODEV;
+ }
+
+ for (m = skx_all_munits; m->did; m++) {
+ rc = get_all_munits(m);
+ if (rc < 0)
+ goto fail;
+ if (rc != m->per_socket * skx_num_sockets) {
+ edac_dbg(2, "Expected %d, got %d of %x\n",
+ m->per_socket * skx_num_sockets, rc, m->did);
+ rc = -ENODEV;
+ goto fail;
+ }
+ }
+
+ list_for_each_entry(d, &skx_edac_list, list) {
+ src_id = get_src_id(d);
+ node_id = skx_get_node_id(d);
+ edac_dbg(2, "src_id=%d node_id=%d\n", src_id, node_id);
+ for (i = 0; i < NUM_IMC; i++) {
+ d->imc[i].mc = mc++;
+ d->imc[i].lmc = i;
+ d->imc[i].src_id = src_id;
+ d->imc[i].node_id = node_id;
+ rc = skx_register_mci(&d->imc[i]);
+ if (rc < 0)
+ goto fail;
+ }
+ }
+
+ /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+ opstate_init();
+
+ setup_skx_debug();
+
+ mce_register_decode_chain(&skx_mce_dec);
+
+ return 0;
+fail:
+ skx_remove();
+ return rc;
+}
+
+static void __exit skx_exit(void)
+{
+ edac_dbg(2, "\n");
+ mce_unregister_decode_chain(&skx_mce_dec);
+ skx_remove();
+ teardown_skx_debug();
+}
+
+module_init(skx_init);
+module_exit(skx_exit);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Tony Luck");
+MODULE_DESCRIPTION("MC Driver for Intel Skylake server processors");
--
2.7.4
More information about the kernel-team
mailing list