[3.19.y-ckt stable] Patch "igb: Fix oops caused by missing queue pairing" has been added to staging queue

Kamal Mostafa kamal at canonical.com
Mon Oct 19 22:39:26 UTC 2015


This is a note to let you know that I have just added a patch titled

    igb: Fix oops caused by missing queue pairing

to the linux-3.19.y-queue branch of the 3.19.y-ckt extended stable tree 
which can be found at:

    http://kernel.ubuntu.com/git/ubuntu/linux.git/log/?h=linux-3.19.y-queue

This patch is scheduled to be released in version 3.19.8-ckt8.

If you, or anyone else, feels it should not be added to this tree, please 
reply to this email.

For more information about the 3.19.y-ckt tree, see
https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable

Thanks.
-Kamal

------

>From b5adc1166892f16feb8d323d521cdfc3c94720ef Mon Sep 17 00:00:00 2001
From: Shota Suzuki <suzuki_shota_t3 at lab.ntt.co.jp>
Date: Wed, 1 Jul 2015 09:25:52 +0900
Subject: igb: Fix oops caused by missing queue pairing

commit 72ddef0506da852dc82f078f37ced8ef4d74a2bf upstream.

When initializing igb driver (e.g. 82576, I350), IGB_FLAG_QUEUE_PAIRS is
set if adapter->rss_queues exceeds half of max_rss_queues in
igb_init_queue_configuration().
On the other hand, IGB_FLAG_QUEUE_PAIRS is not set even if the number of
queues exceeds half of max_combined in igb_set_channels() when changing
the number of queues by "ethtool -L".
In this case, if numvecs is larger than MAX_MSIX_ENTRIES (10), the size
of adapter->msix_entries[], an overflow can occur in
igb_set_interrupt_capability(), which in turn leads to an oops.

Fix this problem as follows:
 - When changing the number of queues by "ethtool -L", set
   IGB_FLAG_QUEUE_PAIRS in the same way as initializing igb driver.
 - When increasing the size of q_vector, reallocate it appropriately.
   (With IGB_FLAG_QUEUE_PAIRS set, the size of q_vector gets larger.)

Another possible way to fix this problem is to cap the queues at its
initial number, which is the number of the initial online cpus. But this
is not the optimal way because we cannot increase queues when another
cpu becomes online.

Note that before commit cd14ef54d25b ("igb: Change to use statically
allocated array for MSIx entries"), this problem did not cause oops
but just made the number of queues become 1 because of entering msi_only
mode in igb_set_interrupt_capability().

Fixes: 907b7835799f ("igb: Add ethtool support to configure number of channels")
Signed-off-by: Shota Suzuki <suzuki_shota_t3 at lab.ntt.co.jp>
Tested-by: Aaron Brown <aaron.f.brown at intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher at intel.com>
Signed-off-by: Kamal Mostafa <kamal at canonical.com>
---
 drivers/net/ethernet/intel/igb/igb.h         |  1 +
 drivers/net/ethernet/intel/igb/igb_ethtool.c |  5 ++++-
 drivers/net/ethernet/intel/igb/igb_main.c    | 16 ++++++++++++++--
 3 files changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index 82d891e..95f47b9 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -531,6 +531,7 @@ void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, unsigned char *va,
 			 struct sk_buff *skb);
 int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr);
 int igb_ptp_get_ts_config(struct net_device *netdev, struct ifreq *ifr);
+void igb_set_flag_queue_pairs(struct igb_adapter *, const u32);
 #ifdef CONFIG_IGB_HWMON
 void igb_sysfs_exit(struct igb_adapter *adapter);
 int igb_sysfs_init(struct igb_adapter *adapter);
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index d5673eb..0afc091 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -2991,6 +2991,7 @@ static int igb_set_channels(struct net_device *netdev,
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	unsigned int count = ch->combined_count;
+	unsigned int max_combined = 0;

 	/* Verify they are not requesting separate vectors */
 	if (!count || ch->rx_count || ch->tx_count)
@@ -3001,11 +3002,13 @@ static int igb_set_channels(struct net_device *netdev,
 		return -EINVAL;

 	/* Verify the number of channels doesn't exceed hw limits */
-	if (count > igb_max_channels(adapter))
+	max_combined = igb_max_channels(adapter);
+	if (count > max_combined)
 		return -EINVAL;

 	if (count != adapter->rss_queues) {
 		adapter->rss_queues = count;
+		igb_set_flag_queue_pairs(adapter, max_combined);

 		/* Hardware has to reinitialize queues and interrupts to
 		 * match the new configuration.
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 032791e..86bc792 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1205,10 +1205,14 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter,

 	/* allocate q_vector and rings */
 	q_vector = adapter->q_vector[v_idx];
-	if (!q_vector)
+	if (!q_vector) {
 		q_vector = kzalloc(size, GFP_KERNEL);
-	else
+	} else if (size > ksize(q_vector)) {
+		kfree_rcu(q_vector, rcu);
+		q_vector = kzalloc(size, GFP_KERNEL);
+	} else {
 		memset(q_vector, 0, size);
+	}
 	if (!q_vector)
 		return -ENOMEM;

@@ -2902,6 +2906,14 @@ static void igb_init_queue_configuration(struct igb_adapter *adapter)

 	adapter->rss_queues = min_t(u32, max_rss_queues, num_online_cpus());

+	igb_set_flag_queue_pairs(adapter, max_rss_queues);
+}
+
+void igb_set_flag_queue_pairs(struct igb_adapter *adapter,
+			      const u32 max_rss_queues)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
 	/* Determine if we need to pair queues. */
 	switch (hw->mac.type) {
 	case e1000_82575:
--
1.9.1





More information about the kernel-team mailing list