[3.16.y-ckt stable] Patch "iio: mxs-lradc: make ADC reads not unschedule touchscreen conversions" has been added to staging queue

[Luis Henriques]

This is a note to let you know that I have just added a patch titled

    iio: mxs-lradc: make ADC reads not unschedule touchscreen conversions

to the linux-3.16.y-queue branch of the 3.16.y-ckt extended stable tree 
which can be found at:

 http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.16.y-queue

This patch is scheduled to be released in version 3.16.7-ckt9.

If you, or anyone else, feels it should not be added to this tree, please 
reply to this email.

For more information about the 3.16.y-ckt tree, see
https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable

Thanks.
-Luis

------

>From 80f61dc52411e871e8e8fd3ae0de3844266f8fd7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Kristina=20Mart=C5=A1enko?= <kristina.martsenko at gmail.com>
Date: Sun, 25 Jan 2015 18:28:21 +0200
Subject: iio: mxs-lradc: make ADC reads not unschedule touchscreen conversions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

commit 6abe0300a1d5242f4ff89257197f284679af1a06 upstream.

Reading a channel through sysfs, or starting a buffered capture, can
occasionally turn off the touchscreen.

This is because the read_raw() and buffer preenable()/postdisable()
callbacks unschedule current conversions on all channels. If a delay
channel happens to schedule a touchscreen conversion at the same time,
the conversion gets cancelled and the touchscreen sequence stops.

This is probably related to this note from the reference manual:

	"If a delay group schedules channels to be sampled and a manual
	write to the schedule field in CTRL0 occurs while the block is
	discarding samples, the LRADC will switch to the new schedule
	and will not sample the channels that were previously scheduled.
	The time window for this to happen is very small and lasts only
	while the LRADC is discarding samples."

So make the callbacks only unschedule conversions for the channels they
use. This means channel 0 for read_raw() and channels 0-5 for the buffer
(if the touchscreen is enabled). Since the touchscreen uses different
channels (6 and 7), it no longer gets turned off.

This is tested and fixes the issue on i.MX28, but hasn't been tested on
i.MX23.

Signed-off-by: Kristina Martšenko <kristina.martsenko at gmail.com>
Reviewed-by: Marek Vasut <marex at denx.de>
Signed-off-by: Jonathan Cameron <jic23 at kernel.org>
Signed-off-by: Luis Henriques <luis.henriques at canonical.com>
---
 drivers/staging/iio/adc/mxs-lradc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
index 74c4a2d057af..565366fcfe3e 100644
--- a/drivers/staging/iio/adc/mxs-lradc.c
+++ b/drivers/staging/iio/adc/mxs-lradc.c
@@ -829,7 +829,7 @@ static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val)
 	if (lradc->soc == IMX28_LRADC)
 		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0),
 			LRADC_CTRL1);
-	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
+	mxs_lradc_reg_clear(lradc, 0x1, LRADC_CTRL0);

 	/* Enable / disable the divider per requirement */
 	if (test_bit(chan, &lradc->is_divided))
@@ -1277,7 +1277,7 @@ static int mxs_lradc_buffer_preenable(struct iio_dev *iio)
 		mxs_lradc_reg_clear(lradc,
 			lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET,
 			LRADC_CTRL1);
-	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
+	mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0);

 	for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) {
 		ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs);
@@ -1310,7 +1310,7 @@ static int mxs_lradc_buffer_postdisable(struct iio_dev *iio)
 	mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK |
 					LRADC_DELAY_KICK, LRADC_DELAY(0));

-	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
+	mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0);
 	if (lradc->soc == IMX28_LRADC)
 		mxs_lradc_reg_clear(lradc,
 			lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET,