[3.19.y-ckt stable] Patch "PCI: Add pci_bus_addr_t" has been added to staging queue
Kamal Mostafa
kamal at canonical.com
Thu Jul 16 01:00:15 UTC 2015
This is a note to let you know that I have just added a patch titled
PCI: Add pci_bus_addr_t
to the linux-3.19.y-queue branch of the 3.19.y-ckt extended stable tree
which can be found at:
http://kernel.ubuntu.com/git/ubuntu/linux.git/log/?h=linux-3.19.y-queue
This patch is scheduled to be released in version 3.19.y-ckt4.
If you, or anyone else, feels it should not be added to this tree, please
reply to this email.
For more information about the 3.19.y-ckt tree, see
https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable
Thanks.
-Kamal
------
>From 40ba4e2272fa402d6e0d5fa80da79a4d01f84af5 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai at kernel.org>
Date: Wed, 27 May 2015 17:23:51 -0700
Subject: PCI: Add pci_bus_addr_t
commit 3a9ad0b4fdcd57f775d3615004c8c64c021a9e7d upstream.
David Ahern reported that d63e2e1f3df9 ("sparc/PCI: Clip bridge windows
to fit in upstream windows") fails to boot on sparc/T5-8:
pci 0000:06:00.0: reg 0x184: can't handle BAR above 4GB (bus address 0x110204000)
The problem is that sparc64 assumed that dma_addr_t only needed to hold DMA
addresses, i.e., bus addresses returned via the DMA API (dma_map_single(),
etc.), while the PCI core assumed dma_addr_t could hold *any* bus address,
including raw BAR values. On sparc64, all DMA addresses fit in 32 bits, so
dma_addr_t is a 32-bit type. However, BAR values can be 64 bits wide, so
they don't fit in a dma_addr_t. d63e2e1f3df9 added new checking that
tripped over this mismatch.
Add pci_bus_addr_t, which is wide enough to hold any PCI bus address,
including both raw BAR values and DMA addresses. This will be 64 bits
on 64-bit platforms and on platforms with a 64-bit dma_addr_t. Then
dma_addr_t only needs to be wide enough to hold addresses from the DMA API.
[bhelgaas: changelog, bugzilla, Kconfig to ensure pci_bus_addr_t is at
least as wide as dma_addr_t, documentation]
Fixes: d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows")
Fixes: 23b13bc76f35 ("PCI: Fail safely if we can't handle BARs larger than 4GB")
Link: http://lkml.kernel.org/r/CAE9FiQU1gJY1LYrxs+ma5LCTEEe4xmtjRG0aXJ9K_Tsu+m9Wuw@mail.gmail.com
Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=96231
Reported-by: David Ahern <david.ahern at oracle.com>
Tested-by: David Ahern <david.ahern at oracle.com>
Signed-off-by: Yinghai Lu <yinghai at kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>
Acked-by: David S. Miller <davem at davemloft.net>
Signed-off-by: Kamal Mostafa <kamal at canonical.com>
---
Documentation/DMA-API-HOWTO.txt | 29 +++++++++++++++++------------
Documentation/DMA-API.txt | 30 +++++++++++++++---------------
drivers/pci/Kconfig | 4 ++++
drivers/pci/bus.c | 10 +++++-----
drivers/pci/probe.c | 12 ++++++------
include/linux/pci.h | 12 +++++++++---
include/linux/types.h | 12 ++++++++++--
7 files changed, 66 insertions(+), 43 deletions(-)
diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt
index 0f7afb2..aef8cc5 100644
--- a/Documentation/DMA-API-HOWTO.txt
+++ b/Documentation/DMA-API-HOWTO.txt
@@ -25,13 +25,18 @@ physical addresses. These are the addresses in /proc/iomem. The physical
address is not directly useful to a driver; it must use ioremap() to map
the space and produce a virtual address.
-I/O devices use a third kind of address: a "bus address" or "DMA address".
-If a device has registers at an MMIO address, or if it performs DMA to read
-or write system memory, the addresses used by the device are bus addresses.
-In some systems, bus addresses are identical to CPU physical addresses, but
-in general they are not. IOMMUs and host bridges can produce arbitrary
+I/O devices use a third kind of address: a "bus address". If a device has
+registers at an MMIO address, or if it performs DMA to read or write system
+memory, the addresses used by the device are bus addresses. In some
+systems, bus addresses are identical to CPU physical addresses, but in
+general they are not. IOMMUs and host bridges can produce arbitrary
mappings between physical and bus addresses.
+From a device's point of view, DMA uses the bus address space, but it may
+be restricted to a subset of that space. For example, even if a system
+supports 64-bit addresses for main memory and PCI BARs, it may use an IOMMU
+so devices only need to use 32-bit DMA addresses.
+
Here's a picture and some examples:
CPU CPU Bus
@@ -72,11 +77,11 @@ can use virtual address X to access the buffer, but the device itself
cannot because DMA doesn't go through the CPU virtual memory system.
In some simple systems, the device can do DMA directly to physical address
-Y. But in many others, there is IOMMU hardware that translates bus
+Y. But in many others, there is IOMMU hardware that translates DMA
addresses to physical addresses, e.g., it translates Z to Y. This is part
of the reason for the DMA API: the driver can give a virtual address X to
an interface like dma_map_single(), which sets up any required IOMMU
-mapping and returns the bus address Z. The driver then tells the device to
+mapping and returns the DMA address Z. The driver then tells the device to
do DMA to Z, and the IOMMU maps it to the buffer at address Y in system
RAM.
@@ -98,7 +103,7 @@ First of all, you should make sure
#include <linux/dma-mapping.h>
is in your driver, which provides the definition of dma_addr_t. This type
-can hold any valid DMA or bus address for the platform and should be used
+can hold any valid DMA address for the platform and should be used
everywhere you hold a DMA address returned from the DMA mapping functions.
What memory is DMA'able?
@@ -316,7 +321,7 @@ There are two types of DMA mappings:
Think of "consistent" as "synchronous" or "coherent".
The current default is to return consistent memory in the low 32
- bits of the bus space. However, for future compatibility you should
+ bits of the DMA space. However, for future compatibility you should
set the consistent mask even if this default is fine for your
driver.
@@ -403,7 +408,7 @@ dma_alloc_coherent() returns two values: the virtual address which you
can use to access it from the CPU and dma_handle which you pass to the
card.
-The CPU virtual address and the DMA bus address are both
+The CPU virtual address and the DMA address are both
guaranteed to be aligned to the smallest PAGE_SIZE order which
is greater than or equal to the requested size. This invariant
exists (for example) to guarantee that if you allocate a chunk
@@ -645,8 +650,8 @@ PLEASE NOTE: The 'nents' argument to the dma_unmap_sg call must be
dma_map_sg call.
Every dma_map_{single,sg}() call should have its dma_unmap_{single,sg}()
-counterpart, because the bus address space is a shared resource and
-you could render the machine unusable by consuming all bus addresses.
+counterpart, because the DMA address space is a shared resource and
+you could render the machine unusable by consuming all DMA addresses.
If you need to use the same streaming DMA region multiple times and touch
the data in between the DMA transfers, the buffer needs to be synced
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 5208840..7eba542 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -18,10 +18,10 @@ Part I - dma_ API
To get the dma_ API, you must #include <linux/dma-mapping.h>. This
provides dma_addr_t and the interfaces described below.
-A dma_addr_t can hold any valid DMA or bus address for the platform. It
-can be given to a device to use as a DMA source or target. A CPU cannot
-reference a dma_addr_t directly because there may be translation between
-its physical address space and the bus address space.
+A dma_addr_t can hold any valid DMA address for the platform. It can be
+given to a device to use as a DMA source or target. A CPU cannot reference
+a dma_addr_t directly because there may be translation between its physical
+address space and the DMA address space.
Part Ia - Using large DMA-coherent buffers
------------------------------------------
@@ -42,7 +42,7 @@ It returns a pointer to the allocated region (in the processor's virtual
address space) or NULL if the allocation failed.
It also returns a <dma_handle> which may be cast to an unsigned integer the
-same width as the bus and given to the device as the bus address base of
+same width as the bus and given to the device as the DMA address base of
the region.
Note: consistent memory can be expensive on some platforms, and the
@@ -193,7 +193,7 @@ dma_map_single(struct device *dev, void *cpu_addr, size_t size,
enum dma_data_direction direction)
Maps a piece of processor virtual memory so it can be accessed by the
-device and returns the bus address of the memory.
+device and returns the DMA address of the memory.
The direction for both APIs may be converted freely by casting.
However the dma_ API uses a strongly typed enumerator for its
@@ -212,20 +212,20 @@ contiguous piece of memory. For this reason, memory to be mapped by
this API should be obtained from sources which guarantee it to be
physically contiguous (like kmalloc).
-Further, the bus address of the memory must be within the
+Further, the DMA address of the memory must be within the
dma_mask of the device (the dma_mask is a bit mask of the
-addressable region for the device, i.e., if the bus address of
-the memory ANDed with the dma_mask is still equal to the bus
+addressable region for the device, i.e., if the DMA address of
+the memory ANDed with the dma_mask is still equal to the DMA
address, then the device can perform DMA to the memory). To
ensure that the memory allocated by kmalloc is within the dma_mask,
the driver may specify various platform-dependent flags to restrict
-the bus address range of the allocation (e.g., on x86, GFP_DMA
-guarantees to be within the first 16MB of available bus addresses,
+the DMA address range of the allocation (e.g., on x86, GFP_DMA
+guarantees to be within the first 16MB of available DMA addresses,
as required by ISA devices).
Note also that the above constraints on physical contiguity and
dma_mask may not apply if the platform has an IOMMU (a device which
-maps an I/O bus address to a physical memory address). However, to be
+maps an I/O DMA address to a physical memory address). However, to be
portable, device driver writers may *not* assume that such an IOMMU
exists.
@@ -296,7 +296,7 @@ reduce current DMA mapping usage or delay and try again later).
dma_map_sg(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction direction)
-Returns: the number of bus address segments mapped (this may be shorter
+Returns: the number of DMA address segments mapped (this may be shorter
than <nents> passed in if some elements of the scatter/gather list are
physically or virtually adjacent and an IOMMU maps them with a single
entry).
@@ -340,7 +340,7 @@ must be the same as those and passed in to the scatter/gather mapping
API.
Note: <nents> must be the number you passed in, *not* the number of
-bus address entries returned.
+DMA address entries returned.
void
dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
@@ -507,7 +507,7 @@ it's asked for coherent memory for this device.
phys_addr is the CPU physical address to which the memory is currently
assigned (this will be ioremapped so the CPU can access the region).
-device_addr is the bus address the device needs to be programmed
+device_addr is the DMA address the device needs to be programmed
with to actually address this memory (this will be handed out as the
dma_addr_t in dma_alloc_coherent()).
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 7a8f1c5..73de4ef 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -1,6 +1,10 @@
#
# PCI configuration
#
+config PCI_BUS_ADDR_T_64BIT
+ def_bool y if (ARCH_DMA_ADDR_T_64BIT || 64BIT)
+ depends on PCI
+
config PCI_MSI
bool "Message Signaled Interrupts (MSI and MSI-X)"
depends on PCI
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 8fb1618..f4367a7 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -98,11 +98,11 @@ void pci_bus_remove_resources(struct pci_bus *bus)
}
static struct pci_bus_region pci_32_bit = {0, 0xffffffffULL};
-#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+#ifdef CONFIG_PCI_BUS_ADDR_T_64BIT
static struct pci_bus_region pci_64_bit = {0,
- (dma_addr_t) 0xffffffffffffffffULL};
-static struct pci_bus_region pci_high = {(dma_addr_t) 0x100000000ULL,
- (dma_addr_t) 0xffffffffffffffffULL};
+ (pci_bus_addr_t) 0xffffffffffffffffULL};
+static struct pci_bus_region pci_high = {(pci_bus_addr_t) 0x100000000ULL,
+ (pci_bus_addr_t) 0xffffffffffffffffULL};
#endif
/*
@@ -206,7 +206,7 @@ int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
resource_size_t),
void *alignf_data)
{
-#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+#ifdef CONFIG_PCI_BUS_ADDR_T_64BIT
int rc;
if (res->flags & IORESOURCE_MEM_64) {
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 23212f8..b7167ad 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -253,8 +253,8 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
}
if (res->flags & IORESOURCE_MEM_64) {
- if ((sizeof(dma_addr_t) < 8 || sizeof(resource_size_t) < 8) &&
- sz64 > 0x100000000ULL) {
+ if ((sizeof(pci_bus_addr_t) < 8 || sizeof(resource_size_t) < 8)
+ && sz64 > 0x100000000ULL) {
res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
res->start = 0;
res->end = 0;
@@ -263,7 +263,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
goto out;
}
- if ((sizeof(dma_addr_t) < 8) && l) {
+ if ((sizeof(pci_bus_addr_t) < 8) && l) {
/* Above 32-bit boundary; try to reallocate */
res->flags |= IORESOURCE_UNSET;
res->start = 0;
@@ -398,7 +398,7 @@ static void pci_read_bridge_mmio_pref(struct pci_bus *child)
struct pci_dev *dev = child->self;
u16 mem_base_lo, mem_limit_lo;
u64 base64, limit64;
- dma_addr_t base, limit;
+ pci_bus_addr_t base, limit;
struct pci_bus_region region;
struct resource *res;
@@ -425,8 +425,8 @@ static void pci_read_bridge_mmio_pref(struct pci_bus *child)
}
}
- base = (dma_addr_t) base64;
- limit = (dma_addr_t) limit64;
+ base = (pci_bus_addr_t) base64;
+ limit = (pci_bus_addr_t) limit64;
if (base != base64) {
dev_err(&dev->dev, "can't handle bridge window above 4GB (bus address %#010llx)\n",
diff --git a/include/linux/pci.h b/include/linux/pci.h
index fa26f28..03d4863 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -575,9 +575,15 @@ int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 val);
+#ifdef CONFIG_PCI_BUS_ADDR_T_64BIT
+typedef u64 pci_bus_addr_t;
+#else
+typedef u32 pci_bus_addr_t;
+#endif
+
struct pci_bus_region {
- dma_addr_t start;
- dma_addr_t end;
+ pci_bus_addr_t start;
+ pci_bus_addr_t end;
};
struct pci_dynids {
@@ -1112,7 +1118,7 @@ int __must_check pci_bus_alloc_resource(struct pci_bus *bus,
int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr);
-static inline dma_addr_t pci_bus_address(struct pci_dev *pdev, int bar)
+static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar)
{
struct pci_bus_region region;
diff --git a/include/linux/types.h b/include/linux/types.h
index a0bb704..20d8fb6 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -142,12 +142,20 @@ typedef unsigned long blkcnt_t;
#define pgoff_t unsigned long
#endif
-/* A dma_addr_t can hold any valid DMA or bus address for the platform */
+/*
+ * A dma_addr_t can hold any valid DMA address, i.e., any address returned
+ * by the DMA API.
+ *
+ * If the DMA API only uses 32-bit addresses, dma_addr_t need only be 32
+ * bits wide. Bus addresses, e.g., PCI BARs, may be wider than 32 bits,
+ * but drivers do memory-mapped I/O to ioremapped kernel virtual addresses,
+ * so they don't care about the size of the actual bus addresses.
+ */
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
typedef u64 dma_addr_t;
#else
typedef u32 dma_addr_t;
-#endif /* dma_addr_t */
+#endif
#ifdef __CHECKER__
#else
--
1.9.1
More information about the kernel-team
mailing list