[3.16.y-ckt stable] Patch "usb: gadget: at91_udc: move prepare clk into process context" has been added to staging queue

[Luis Henriques]

This is a note to let you know that I have just added a patch titled

    usb: gadget: at91_udc: move prepare clk into process context

to the linux-3.16.y-queue branch of the 3.16.y-ckt extended stable tree 
which can be found at:

 http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.16.y-queue

This patch is scheduled to be released in version 3.16.7-ckt4.

If you, or anyone else, feels it should not be added to this tree, please 
reply to this email.

For more information about the 3.16.y-ckt tree, see
https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable

Thanks.
-Luis

------

>From 97863cb86abba952db4d721de8d8fcb0c16355ba Mon Sep 17 00:00:00 2001
From: Ronald Wahl <ronald.wahl at raritan.com>
Date: Wed, 19 Nov 2014 16:37:27 +0100
Subject: usb: gadget: at91_udc: move prepare clk into process context

commit b2ba27a5c56ff7204d8a8684893d64d4afe2cee5 upstream.

Commit 7628083227b6bc4a7e33d7c381d7a4e558424b6b (usb: gadget: at91_udc:
prepare clk before calling enable) added clock preparation in interrupt
context. This is not allowed as it might sleep. Also setting the clock
rate is unsafe to call from there for the same reason. Move clock
preparation and setting clock rate into process context (at91udc_probe).

Signed-off-by: Ronald Wahl <ronald.wahl at raritan.com>
Acked-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon at free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
Cc: Felipe Balbi <balbi at ti.com>
Signed-off-by: Felipe Balbi <balbi at ti.com>
Signed-off-by: Luis Henriques <luis.henriques at canonical.com>
---
 drivers/usb/gadget/at91_udc.c | 44 +++++++++++++++++++++++++++++++------------
 1 file changed, 32 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index cfd18bcca723..0d685d0b858e 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -870,12 +870,10 @@ static void clk_on(struct at91_udc *udc)
 		return;
 	udc->clocked = 1;

-	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
-		clk_set_rate(udc->uclk, 48000000);
-		clk_prepare_enable(udc->uclk);
-	}
-	clk_prepare_enable(udc->iclk);
-	clk_prepare_enable(udc->fclk);
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_enable(udc->uclk);
+	clk_enable(udc->iclk);
+	clk_enable(udc->fclk);
 }

 static void clk_off(struct at91_udc *udc)
@@ -884,10 +882,10 @@ static void clk_off(struct at91_udc *udc)
 		return;
 	udc->clocked = 0;
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	clk_disable_unprepare(udc->fclk);
-	clk_disable_unprepare(udc->iclk);
+	clk_disable(udc->fclk);
+	clk_disable(udc->iclk);
 	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		clk_disable_unprepare(udc->uclk);
+		clk_disable(udc->uclk);
 }

 /*
@@ -1780,14 +1778,24 @@ static int at91udc_probe(struct platform_device *pdev)
 	}

 	/* don't do anything until we have both gadget driver and VBUS */
+	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
+		clk_set_rate(udc->uclk, 48000000);
+		retval = clk_prepare(udc->uclk);
+		if (retval)
+			goto fail1;
+	}
+	retval = clk_prepare(udc->fclk);
+	if (retval)
+		goto fail1a;
+
 	retval = clk_prepare_enable(udc->iclk);
 	if (retval)
-		goto fail1;
+		goto fail1b;
 	at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
 	at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
 	/* Clear all pending interrupts - UDP may be used by bootloader. */
 	at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
-	clk_disable_unprepare(udc->iclk);
+	clk_disable(udc->iclk);

 	/* request UDC and maybe VBUS irqs */
 	udc->udp_irq = platform_get_irq(pdev, 0);
@@ -1795,7 +1803,7 @@ static int at91udc_probe(struct platform_device *pdev)
 			0, driver_name, udc);
 	if (retval < 0) {
 		DBG("request irq %d failed\n", udc->udp_irq);
-		goto fail1;
+		goto fail1c;
 	}
 	if (gpio_is_valid(udc->board.vbus_pin)) {
 		retval = gpio_request(udc->board.vbus_pin, "udc_vbus");
@@ -1848,6 +1856,13 @@ fail3:
 		gpio_free(udc->board.vbus_pin);
 fail2:
 	free_irq(udc->udp_irq, udc);
+fail1c:
+	clk_unprepare(udc->iclk);
+fail1b:
+	clk_unprepare(udc->fclk);
+fail1a:
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_unprepare(udc->uclk);
 fail1:
 	if (IS_ENABLED(CONFIG_COMMON_CLK) && !IS_ERR(udc->uclk))
 		clk_put(udc->uclk);
@@ -1896,6 +1911,11 @@ static int __exit at91udc_remove(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));

+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_unprepare(udc->uclk);
+	clk_unprepare(udc->fclk);
+	clk_unprepare(udc->iclk);
+
 	clk_put(udc->iclk);
 	clk_put(udc->fclk);
 	if (IS_ENABLED(CONFIG_COMMON_CLK))
--
2.1.4