[3.13.y.z extended stable] Patch "serial: 8250: Add Quark X1000 to 8250_pci.c" has been added to staging queue

Kamal Mostafa kamal at canonical.com
Tue Oct 21 20:09:25 UTC 2014


This is a note to let you know that I have just added a patch titled

    serial: 8250: Add Quark X1000 to 8250_pci.c

to the linux-3.13.y-queue branch of the 3.13.y.z extended stable tree 
which can be found at:

 http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.13.y-queue

This patch is scheduled to be released in version 3.13.11.10.

If you, or anyone else, feels it should not be added to this tree, please 
reply to this email.

For more information about the 3.13.y.z tree, see
https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable

Thanks.
-Kamal

------

>From 474b93bf8c44ce8ca6ed81e99ac8fc1551a7545a Mon Sep 17 00:00:00 2001
From: Bryan O'Donoghue <pure.logic at nexus-software.ie>
Date: Tue, 23 Sep 2014 01:21:11 +0100
Subject: serial: 8250: Add Quark X1000 to 8250_pci.c

commit 1ede7dcca3c4fa15a518ab0473126f9c3e621e4c upstream.

Quark X1000 contains two designware derived 8250 serial ports.
Each port has a unique PCI configuration space consisting of
BAR0:UART BAR1:DMA respectively.

Unlike the standard 8250 the register width is 32 bits for RHR,IER etc
The Quark UART has a fundamental clock @ 44.2368 MHz allowing for a
bitrate of up to about 2.76 megabits per second.

This patch enables standard 8250 mode

Signed-off-by: Bryan O'Donoghue <pure.logic at nexus-software.ie>
Reviewed-by: Heikki Krogerus <heikki.krogerus at linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal at canonical.com>
---
 drivers/tty/serial/8250/8250_pci.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 77d0aca..4ba3ee1 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1766,6 +1766,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_COMMTECH_4222PCIE	0x0022
 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
 #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
+#define PCI_DEVICE_ID_INTEL_QRK_UART	0x0936

 #define PCI_VENDOR_ID_SUNIX		0x1fd4
 #define PCI_DEVICE_ID_SUNIX_1999	0x1999
@@ -1876,6 +1877,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.setup		= byt_serial_setup,
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_QRK_UART,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_default_setup,
+	},
 	/*
 	 * ITE
 	 */
@@ -2710,6 +2718,7 @@ enum pci_board_num_t {
 	pbn_ADDIDATA_PCIe_8_3906250,
 	pbn_ce4100_1_115200,
 	pbn_byt,
+	pbn_qrk,
 	pbn_omegapci,
 	pbn_NETMOS9900_2s_115200,
 	pbn_brcm_trumanage,
@@ -3456,6 +3465,12 @@ static struct pciserial_board pci_boards[] = {
 		.uart_offset	= 0x80,
 		.reg_shift      = 2,
 	},
+	[pbn_qrk] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 2764800,
+		.reg_shift	= 2,
+	},
 	[pbn_omegapci] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 8,
@@ -5150,6 +5165,12 @@ static struct pci_device_id serial_pci_tbl[] = {
 		pbn_byt },

 	/*
+	 * Intel Quark x1000
+	 */
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_qrk },
+	/*
 	 * Cronyx Omega PCI
 	 */
 	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA,
--
1.9.1





More information about the kernel-team mailing list