[3.13.y.z extended stable] Patch "can: flexcan: correctly initialize mailboxes" has been added to staging queue

[Kamal Mostafa]

This is a note to let you know that I have just added a patch titled

    can: flexcan: correctly initialize mailboxes

to the linux-3.13.y-queue branch of the 3.13.y.z extended stable tree 
which can be found at:

 http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.13.y-queue

This patch is scheduled to be released in version 3.13.11.9.

If you, or anyone else, feels it should not be added to this tree, please 
reply to this email.

For more information about the 3.13.y.z tree, see
https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable

Thanks.
-Kamal

------

>From fe5116934043cd03fee174aa6906d5d198b5fa9e Mon Sep 17 00:00:00 2001
From: David Jander <david at protonic.nl>
Date: Wed, 27 Aug 2014 11:58:05 +0200
Subject: can: flexcan: correctly initialize mailboxes

commit fc05b884a31dbf259cc73cc856e634ec3acbebb6 upstream.

Apparently mailboxes may contain random data at startup, causing some of them
being prepared for message reception. This causes overruns being missed or even
confusing the IRQ check for trasmitted messages, increasing the transmit
counter instead of the error counter.

This patch initializes all mailboxes after the FIFO as RX_INACTIVE.

Signed-off-by: David Jander <david at protonic.nl>
Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
Signed-off-by: Kamal Mostafa <kamal at canonical.com>
---
 drivers/net/can/flexcan.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index c847e80..6360356 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -749,6 +749,7 @@ static int flexcan_chip_start(struct net_device *dev)
 	struct flexcan_regs __iomem *regs = priv->base;
 	int err;
 	u32 reg_mcr, reg_ctrl;
+	int i;

 	/* enable module */
 	err = flexcan_chip_enable(priv);
@@ -820,6 +821,12 @@ static int flexcan_chip_start(struct net_device *dev)
 	netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
 	flexcan_write(reg_ctrl, &regs->ctrl);

+	/* clear and invalidate all mailboxes first */
+	for (i = FLEXCAN_TX_BUF_ID; i < ARRAY_SIZE(regs->cantxfg); i++) {
+		flexcan_write(FLEXCAN_MB_CODE_RX_INACTIVE,
+			      &regs->cantxfg[i].can_ctrl);
+	}
+
 	/* mark TX mailbox as INACTIVE */
 	flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
 		      &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
--
1.9.1