[3.13.y.z extended stable] Patch "bnx2x: Fix link for KR with swapped polarity lane" has been added to staging queue

[Kamal Mostafa]

This is a note to let you know that I have just added a patch titled

    bnx2x: Fix link for KR with swapped polarity lane

to the linux-3.13.y-queue branch of the 3.13.y.z extended stable tree 
which can be found at:

 http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.13.y-queue

This patch is scheduled to be released in version 3.13.11.9.

If you, or anyone else, feels it should not be added to this tree, please 
reply to this email.

For more information about the 3.13.y.z tree, see
https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable

Thanks.
-Kamal

------

>From 6b2a4ffa84a38b5ecfbf4afee1950cdbebe586d4 Mon Sep 17 00:00:00 2001
From: Yaniv Rosner <yaniv.rosner at qlogic.com>
Date: Thu, 12 Jun 2014 07:55:29 +0300
Subject: bnx2x: Fix link for KR with swapped polarity lane

commit dad91ee478c7f39e04a33272732147b8c274bb58 upstream.

This avoids clearing the RX polarity setting in KR mode when polarity lane
is swapped, as otherwise this will result in failed link.

Signed-off-by: Yaniv Rosner <yaniv.rosner at qlogic.com>
Signed-off-by: Yuval Mintz <yuval.mintz at qlogic.com>
Signed-off-by: Ariel Elior <ariel.elior at qlogic.com>
Signed-off-by: David S. Miller <davem at davemloft.net>
Cc: Leann Ogasawara <leann.ogasawara at canonical.com>
Cc: Brad Figg <brad.figg at canonical.com>
Signed-off-by: Kamal Mostafa <kamal at canonical.com>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 25 ++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 11fc795..26bb478 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -3749,7 +3749,8 @@ static void bnx2x_warpcore_restart_AN_KR(struct bnx2x_phy *phy,
 static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
 					struct link_params *params,
 					struct link_vars *vars) {
-	u16 lane, i, cl72_ctrl, an_adv = 0;
+	u16 lane, i, cl72_ctrl, an_adv = 0, val;
+	u32 wc_lane_config;
 	struct bnx2x *bp = params->bp;
 	static struct bnx2x_reg_set reg_set[] = {
 		{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
@@ -3868,15 +3869,27 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
 		/* Enable Auto-Detect to support 1G over CL37 as well */
 		bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
 				 MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, 0x10);
-
+		wc_lane_config = REG_RD(bp, params->shmem_base +
+					offsetof(struct shmem_region, dev_info.
+					shared_hw_config.wc_lane_config));
+		bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+				MDIO_WC_REG_RX0_PCI_CTRL + (lane << 4), &val);
 		/* Force cl48 sync_status LOW to avoid getting stuck in CL73
 		 * parallel-detect loop when CL73 and CL37 are enabled.
 		 */
-		CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
-				  MDIO_AER_BLOCK_AER_REG, 0);
+		val |= 1 << 11;
+
+		/* Restore Polarity settings in case it was run over by
+		 * previous link owner
+		 */
+		if (wc_lane_config &
+		    (SHARED_HW_CFG_RX_LANE0_POL_FLIP_ENABLED << lane))
+			val |= 3 << 2;
+		else
+			val &= ~(3 << 2);
 		bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
-				 MDIO_WC_REG_RXB_ANA_RX_CONTROL_PCI, 0x0800);
-		bnx2x_set_aer_mmd(params, phy);
+				 MDIO_WC_REG_RX0_PCI_CTRL + (lane << 4),
+				 val);

 		bnx2x_disable_kr2(params, vars, phy);
 	}
--
1.9.1