[3.11.y.z extended stable] Patch "gpio: twl4030: Fix regression for twl gpio LED output" has been added to staging queue

[Luis Henriques]

This is a note to let you know that I have just added a patch titled

    gpio: twl4030: Fix regression for twl gpio LED output

to the linux-3.11.y-queue branch of the 3.11.y.z extended stable tree 
which can be found at:

 http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.11.y-queue

If you, or anyone else, feels it should not be added to this tree, please 
reply to this email.

For more information about the 3.11.y.z tree, see
https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable

Thanks.
-Luis

------

>From fddbcca8f780b062091d4f7c062da15580b12d61 Mon Sep 17 00:00:00 2001
From: Roger Quadros <rogerq at ti.com>
Date: Thu, 5 Dec 2013 11:23:35 +0200
Subject: gpio: twl4030: Fix regression for twl gpio LED output

commit f5837ec11f8cfa6d53ebc5806582771b2c9988c6 upstream.

Commit 0b2aa8be introduced a regression that causes failure
in setting LED GPO direction to OUT.

This causes USB host probe failures for Beagleboard C4.

platform usb_phy_gen_xceiv.2: Driver usb_phy_gen_xceiv requests probe deferral
hsusb2_vcc: Failed to request enable GPIO510: -22
reg-fixed-voltage reg-fixed-voltage.0.auto: Failed to register regulator: -22
reg-fixed-voltage: probe of reg-fixed-voltage.0.auto failed with error -22

direction_out/direction_in must return 0 if the operation succeeded.

Also, don't update direction flag and output data if twl4030_set_gpio_direction()
failed inside twl_direction_out();

Signed-off-by: Roger Quadros <rogerq at ti.com>
Acked-by: Tony Lindgren <tony at atomide.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Luis Henriques <luis.henriques at canonical.com>
---
 drivers/gpio/gpio-twl4030.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index ed1d10a..28d9876 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -300,7 +300,7 @@ static int twl_direction_in(struct gpio_chip *chip, unsigned offset)
 	if (offset < TWL4030_GPIO_MAX)
 		ret = twl4030_set_gpio_direction(offset, 1);
 	else
-		ret = -EINVAL;
+		ret = -EINVAL;	/* LED outputs can't be set as input */

 	if (!ret)
 		priv->direction &= ~BIT(offset);
@@ -354,11 +354,20 @@ static void twl_set(struct gpio_chip *chip, unsigned offset, int value)
 static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct gpio_twl4030_priv *priv = to_gpio_twl4030(chip);
-	int ret = -EINVAL;
+	int ret = 0;

 	mutex_lock(&priv->mutex);
-	if (offset < TWL4030_GPIO_MAX)
+	if (offset < TWL4030_GPIO_MAX) {
 		ret = twl4030_set_gpio_direction(offset, 0);
+		if (ret) {
+			mutex_unlock(&priv->mutex);
+			return ret;
+		}
+	}
+
+	/*
+	 *  LED gpios i.e. offset >= TWL4030_GPIO_MAX are always output
+	 */

 	priv->direction |= BIT(offset);
 	mutex_unlock(&priv->mutex);
--
1.8.3.2