[PATCH 096/145] ath9k_hw: Assign default xlna config for AR9485

[Kamal Mostafa]

3.8.13.5 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sujith Manoharan <c_manoha at qca.qualcomm.com>

commit 30d5b709da23f4ab9836c7f66d2d2e780a69cf12 upstream.

For AR9485 boards with XLNA, the default gpio config
is not set correctly, fix this.

Signed-off-by: Sujith Manoharan <c_manoha at qca.qualcomm.com>
Signed-off-by: John W. Linville <linville at tuxdriver.com>
Signed-off-by: Kamal Mostafa <kamal at canonical.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 8 ++++++--
 drivers/net/wireless/ath/ath9k/ar9003_phy.h    | 2 ++
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 562186c..92e761a 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3563,14 +3563,18 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
 {
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	int chain;
-	u32 regval;
+	u32 regval, value;
 	static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = {
 			AR_PHY_SWITCH_CHAIN_0,
 			AR_PHY_SWITCH_CHAIN_1,
 			AR_PHY_SWITCH_CHAIN_2,
 	};
 
-	u32 value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
+	if (AR_SREV_9485(ah) && (ar9003_hw_get_rx_gain_idx(ah) == 0))
+		ath9k_hw_cfg_output(ah, AR9300_EXT_LNA_CTL_GPIO_AR9485,
+				    AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED);
+
+	value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
 
 	if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
 		REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM,
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 1079562..6bf7652 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -351,6 +351,8 @@
 
 #define AR_PHY_CCA_NOM_VAL_9330_2GHZ          -118
 
+#define AR9300_EXT_LNA_CTL_GPIO_AR9485 9
+
 /*
  * AGC Field Definitions
  */
-- 
1.8.1.2