[PATCH 3.11 037/208] r8169: check ALDPS bit and disable it if enabled for the 8168g

[Luis Henriques]

3.11.10.2 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Chang <dchang at suse.com>

commit 1bac1072425c86f1ac85bd5967910706677ef8b3 upstream.

Windows driver will enable ALDPS function, but linux driver and firmware
do not have any configuration related to ALDPS function for 8168g.
So restart system to linux and remove the NIC cable, LAN enter ALDPS,
then LAN RX will be disabled.

This issue can be easily reproduced on dual boot windows and linux
system with RTL_GIGA_MAC_VER_40 chip.

Realtek said, ALDPS function can be disabled by configuring to PHY,
switch to page 0x0A43, reg0x10 bit2=0.

Signed-off-by: David Chang <dchang at suse.com>
Acked-by: Hayes Wang <hayeswang at realtek.com>
Signed-off-by: David S. Miller <davem at davemloft.net>
Signed-off-by: Luis Henriques <luis.henriques at canonical.com>
---
 drivers/net/ethernet/realtek/r8169.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 7ba68e0..5186136 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -3464,6 +3464,11 @@ static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp)
 	rtl_writephy(tp, 0x14, 0x9065);
 	rtl_writephy(tp, 0x14, 0x1065);
 
+	/* Check ALDPS bit, disable it if enabled */
+	rtl_writephy(tp, 0x1f, 0x0a43);
+	if (rtl_readphy(tp, 0x10) & 0x0004)
+		rtl_w1w0_phy(tp, 0x10, 0x0000, 0x0004);
+
 	rtl_writephy(tp, 0x1f, 0x0000);
 }
 
-- 
1.8.3.2