[3.11.y.z extended stable] Patch "[media] stb0899_drv: Don't use dynamic static allocation" has been added to staging queue

[Luis Henriques]

This is a note to let you know that I have just added a patch titled

    [media] stb0899_drv: Don't use dynamic static allocation

to the linux-3.11.y-queue branch of the 3.11.y.z extended stable tree 
which can be found at:

 http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.11.y-queue

If you, or anyone else, feels it should not be added to this tree, please 
reply to this email.

For more information about the 3.11.y.z tree, see
https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable

Thanks.
-Luis

------

>From 0b124fc558b9efdc6780b8aa620010a8c1ae547c Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <m.chehab at samsung.com>
Date: Sat, 2 Nov 2013 05:14:58 -0300
Subject: [media] stb0899_drv: Don't use dynamic static allocation

commit ba4746423488aafa435739c32bfe0758f3dd5d77 upstream.

Dynamic static allocation is evil, as Kernel stack is too low, and
compilation complains about it on some archs:
	drivers/media/dvb-frontends/stb0899_drv.c:540:1: warning: 'stb0899_write_regs' uses dynamic stack allocation [enabled by default]
Instead, let's enforce a limit for the buffer. Considering that I2C
transfers are generally limited, and that devices used on USB has a
max data length of 64 bytes for	the control URBs.
So, it seem safe to use 64 bytes as the hard limit for all those devices.
 On most cases, the limit is a way lower than that, but	this limit
is small enough to not affect the Kernel stack, and it is a no brain
limit, as using smaller ones would require to either carefully each
driver or to take a look on each datasheet.

Signed-off-by: Mauro Carvalho Chehab <m.chehab at samsung.com>
Reviewed-by: Hans Verkuil <hans.verkuil at cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab at samsung.com>
Signed-off-by: Luis Henriques <luis.henriques at canonical.com>
---
 drivers/media/dvb-frontends/stb0899_drv.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/media/dvb-frontends/stb0899_drv.c b/drivers/media/dvb-frontends/stb0899_drv.c
index 3dd5714..07cd5ea 100644
--- a/drivers/media/dvb-frontends/stb0899_drv.c
+++ b/drivers/media/dvb-frontends/stb0899_drv.c
@@ -32,6 +32,9 @@
 #include "stb0899_priv.h"
 #include "stb0899_reg.h"

+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE  64
+
 static unsigned int verbose = 0;//1;
 module_param(verbose, int, 0644);

@@ -499,7 +502,7 @@ err:
 int stb0899_write_regs(struct stb0899_state *state, unsigned int reg, u8 *data, u32 count)
 {
 	int ret;
-	u8 buf[2 + count];
+	u8 buf[MAX_XFER_SIZE];
 	struct i2c_msg i2c_msg = {
 		.addr	= state->config->demod_address,
 		.flags	= 0,
@@ -507,6 +510,13 @@ int stb0899_write_regs(struct stb0899_state *state, unsigned int reg, u8 *data,
 		.len	= 2 + count
 	};

+	if (2 + count > sizeof(buf)) {
+		printk(KERN_WARNING
+		       "%s: i2c wr reg=%04x: len=%d is too big!\n",
+		       KBUILD_MODNAME, reg, count);
+		return -EINVAL;
+	}
+
 	buf[0] = reg >> 8;
 	buf[1] = reg & 0xff;
 	memcpy(&buf[2], data, count);
--
1.8.3.2